Job Recruitment Website - Job information - How to adjust the temperature of ZTE Merlot refrigerator?

How to adjust the temperature of ZTE Merlot refrigerator?

The temperature of ZTE Merlot freezer is adjusted at 0, 1, 2, 3, 4, 5, 6 and 7. The higher the number, the lower the temperature of the freezer. Generally, we only need to adjust the temperature of the freezer to 3 in spring and autumn and to 1 or 2 in summer, which can achieve better energy-saving effect.

Because the thermostat is set at the coldest point, that is, when the evaporation temperature is very low, the compressor will stop, resulting in a very low temperature in the refrigeration room. At this time, the thermostat can be adjusted to a suitable state. If the stop temperature set in the thermostat is too low, it will prolong the running time of the compressor, increase the refrigeration capacity of the system and make the temperature in the box too low. The temperature difference adjusting screw on the thermostat should be adjusted to change the control temperature of the evaporator. After the temperature adjustment is stable, the change should be observed.

Instructions for use of ZTE Merlot refrigerator.

First of all, read the product instructions carefully. After fully understanding the product performance and precautions, check whether the product is in good condition, and check all parts of the freezer and fresh-keeping display cabinet. When there is power failure, please open the fresh-keeping display cabinet and refrigerator door. If there is power failure for a long time, please take the red wine out of the fresh-keeping display cabinet to prevent mildew.

Note: Do not put it in a place with heat source or in close contact with other electrical appliances, and do not press any electrical appliances on the cabinet of the fresh-keeping display cabinet. After power-on, can you hear the sound of fan working and the normal display of LED? Check the power supply at home, whether it is grounded or not, and run it with reduced load at the beginning of use, because the moving parts of the new machine have a running-in process, which will increase a lot after running for a period of time, which can prolong the life of refrigerators and fresh-keeping display cabinets.