How to do marble renovation What are the steps of marble renovation?

With the increasing application of stone in decoration engineering and people's daily life, people put forward higher requirements for the decorative effect of stone. "Stone needs maintenance" is more and more accepted by people, and stone maintenance has become an important part in the process of building decorative stone. Stone renovation can overcome the defects such as unevenness, defects and scratches in the process of stone decoration, and fully display the elegant and noble color of stone. Let's take a look at how to do marble renovation and what are the steps of marble renovation.

How to renovate marble?

Marble renovation is a process of cleaning and polishing marble floors, walls (or external walls), countertops and columns. With the help of chemicals and stone renovation nursing machinery and tools, the brightness will be restored to the same level as before the initial installation and the marble floor will be more ornamental.

The renovated marble slab has the following four effects:

1, hardness improvement: treated surface,

Dust-free, wear-resistant and scratch-resistant, extending the service life of stone floor. 2. Mirror effect: it can make the surface of terrazzo reach the same luster as natural stone with high finish. The luminosity can reach 105 or 3, and the pollution resistance is good: corrosion resistance, oil resistance, water resistance, leakage prevention and pollution prevention, and the water absorption rate is less than 0.5%.

4. Easy maintenance: easy daily cleaning and maintenance, greatly reducing the cost of later cleaning and maintenance. In daily life, only dust push and electrostatic vacuum push are needed.

Dust, regular neutral detergent cleaning or stone care liquid polishing marble plate.

Reasonable time for marble renovation

Many people don't know about stone renovation, and they don't know what kind of stone and when it needs renovation. I'm here to explain it to you, so that you can have a comprehensive understanding of what marble decoration is.

1, the first kind of stone that needs to be renovated is: the stone has been used for a long time, and the gloss is reduced because of normal friction damage; If you want to redecorate or enhance your image,

In that case, the original stone generally does not need to be replaced. However, it is necessary to ask a professional company to carry out professional renovation of marble, so as to ensure that the original stone can regain its new glory. 2. The second kind of stone that needs to be decorated is: after all the decorated stones are paved, there will be gaps between plates. At this time, it is necessary to fill the gap with a color similar to that of the stone.

After filling, it is necessary to grind and polish the filler now. This is also a kind of stone renovation treatment.

3. The third kind of stone that needs to be decorated is: As we all know, during the decoration construction, a large number of decoration personnel need to move many objects, such as lifting frames and ladders. Decoration personnel can't always pay attention to the protection of the stone surface, so sometimes it will cause wear and tear, and in serious cases it will damage the stone. Sometimes because of the different standards of decoration company personnel, the decoration effect on stone materials is not good. At this time, it is necessary to treat the dislocated stones again.

Marble renovation step program

Natural marble, also known as marble, is mainly composed of calcium carbonate, magnesium, sodium and silicon. Its friction hardness is about 4.5, which is relatively soft. The weather resistance is poor, so the worn surface is easy to lose luster. According to the degree of stone surface wear, we can choose to renovate light, medium and deep stones.

The equipment, accessories and consumables needed for marble renovation include: ordinary weighting machine (or ASL Mei Jie T2 stone renovation machine), 4-inch diamond water mill, 17-inch renovation board, water absorber, signboard, watering can, glass scraper, wiper and bucket.

A slight renovation of marble

There are slight scratches on the stone surface, which can be refurbished by a slight renovation process. If there is old wax on the ground, wax it first, and then polish it with 800# diamond water mill and clean water 10 minute. Attention: add water during grinding, keep the ground moist, and suck the sewage with a water suction machine to prevent the sewage from polluting the ground twice. Then replace 1500# and 3000# polishing pads and diamond water mill pads, and polish them one by one according to the above method. After the renovation plan is completed, the stone surface is cleaned with clear water to absorb moisture, and the marble is slightly renovated.

Moderate renovation of marble

When the stone surface loses its luster, it can't reflect the object at all, but it doesn't have too deep scratches, so it can be refurbished through a moderate renovation process.

Polishing with 200#, 400#, 800#, 1500# and 3000# polishing pads and diamond water mill pads one by one. Polishing methods and precautions are the same as above. Deep renovation of marble

When the stone surface has holes, weathering, serious corrosion, complete loss of luster and deep scratches, the deep renovation process can be used for renovation. Before the renovation, the hole should be repaired. The method is as follows: clean the dirt in the hole first, and then dry the stone. According to the color and reflective characteristics of the original stone, imported epoxy resin glue or unsaturated resin glue is selected and repaired after color matching. The weighting machine, renovation plate and 50#, 150#, 200#, 400#, 800# and 650 # should be used. Polishing methods and precautions are consistent with light renovation. If the marble crystal hard powder is used to carry out crystal hard treatment on the stone, it can be directly carried out after being polished by 800# diamond water mill in the renovation process, and the treated stone surface is as bright as new.

Editor's summary: Information about how to do marble renovation and what are the steps of marble renovation is introduced here. I hope this article is helpful to everyone. If you still don't understand, please leave me a message below and we will answer you as soon as possible.

Polishing methods and precautions are consistent with light renovation. If the marble crystal hard powder is used to carry out crystal hard treatment on the stone, it can be directly carried out after being polished by 800# diamond water mill in the renovation process, and the treated stone surface is as bright as new. Editor's summary: Information about how to do marble renovation and what are the steps of marble renovation is introduced here. I hope this article is helpful to everyone. If you still don't understand, please leave me a message below and we will answer you as soon as possible.