Construction Technology Sharing of Reflective Coatings in Chongqing

Keguan Coating Construction Department shares Chongqing reflective coating construction technology.

Cleaning the substrate surface

Before construction, the oil, water and dust on the surface of the base should be thoroughly removed, and the working face should be kept dry.

Stir evenly

Before use, the reflective primer and reflective paint must be stirred evenly, and at the same time, they must be stirred continuously during construction.

Matching reflective primer

The reflective primer of our factory must be used as the primer. After the reflective primer is dried, it should be sprayed with reflective paint. The best effect is to spray two reflective primers on cement.

Spray paint film should be thin.

The sprayed paint film should be thin, not too thick, about 20 microns thick, otherwise the effect is not good.

Theoretical consumption

In general, the theoretical dosage of reflective coatings in Chongqing is (8- 10 m2)/kg; 1000 square meters needs about 400 kilograms twice; This is related to the roughness of the base. Coating thickness of paint film.