Workflow of garment factory production workshop

Go to Baidu Wenku to view the complete content>

Content comes from user:彡彡九图文

Workflow of garment factory production workshop

Article 1: Garment factory production flow chart

Garment factory production flow chart

Garment factory production workshop work flow

(1) Cutting work is According to the production notice and production plan issued by the production department, go to the fabric warehouse to collect fabrics, and go to the auxiliary materials warehouse to collect auxiliary materials. Work summary of the China University Network sample: Work flow in the production workshop of a garment factory. Cut raw materials such as fabrics, linings and gussets into the pieces required for clothing.

(2) Develop a layout plan based on the production notice and submit it to the computer layout master in the board room for layout. After review by the supervisor of the board room, the marking diagram will be output on the plotter. The work summary is "Preparation" Clothing factory production workshop work flow" ().

(3) The cutting master stacks the fabrics layer by layer on the cutting bed according to the layout length and the number of layers required for the process. The length and number of layers should be correct, the edges of the fabric should be aligned, the fabric surface should be flat, and the fabric should be stretched as tension-free as possible. Pay attention to the removal of defective fabrics and pay attention to the requirements for grids and strips. The thickness of the paved material cannot exceed the maximum cutting height of the cutting equipment.

(4) The cutting master cuts the fabric into pieces and completes the work according to the pattern lines of the marking diagram. Select cutting equipment and cutter shape according to process requirements and fabric properties. When cutting, pay attention to the cutting accuracy of the garment pieces and fix the fabric well. The positioning marks on the cutting pieces should

(5) The bundler is responsible for numbering the stack of cut pieces. Due to the large number of pieces, in order to avoid confusion and errors in matching pieces, they are bundled and packaged after cutting.

(6) The cutting workshop must also register daily handover records and film exchange records with each sewing workshop.

(7) The flat seam workshop arranges production tasks according to the production plan and production notice, and the arrangement of the assembly line must fully consider load balance and flow efficiency. The adjustment of the assembly line should be included in the performance evaluation of the production director and vehicle management. 6. The workshop schedules production in strict accordance with the production plan, and carefully organizes production according to the equipment status and personnel of the workshop. (Sample Clothes Sutra