Where can I find a punch master?

Punch holes in the wall. If you know someone who runs a hardware store or a power tool, you can borrow it yourself or call the property manager, but they will charge you a certain fee.

Wall punching tool

1. Clamping tool: use the drill chuck to install the straight shank drill bit, and use it to tighten the wrench to realize the opening and closing operation during rotation; The drill bit with tapered handle shall be equipped with a drill sleeve, with one side of the drill bit installed and the other side connected with the tapered hole on the shaft.

2. Bench vise, flat pliers and pressure plate: The workpiece should be firm, but not too tight, so as not to damage the drilling hole.

3. Fixed shelf: the narrow wall is nailed with wooden strips first, and the red brick wall can be directly nailed with cement and steel nails; The concrete wall should be punched with electric hammer first, then nailed with wooden wedge, and the shelf should be fixed. If it is uneven, it should be leveled with wooden strips, then decorated with decorative plates and painted.