Renovation technology of Futian wooden floor in Shenzhen

Shenzhen Futian wood floor renovation process consists of large-scale floor renovation machinery, sand, paint and other tools imported by Sid, which is divided into seven steps.

Paint removal and polishing

Using large-scale Sid imported floor renovation machinery, 24 # coarse sand was used to polish and remove the paint layer several times.

Grind off the surface layer

Use No.40 sand to grind off the surface layer and wood layer by about 0.5 mm. ..

Fine polishing

Then polish with 100 fine sand to make the floor surface fine and smooth to a new state.

Global smoothing

The corners of the floor are polished with a small angle grinder to achieve the overall smooth effect.

Clean sanitation

After cleaning, close the window, brush the paint for the first time and dry it.

Brush it three times

After the paint is dry, carefully polish it with 360 # sand, polish the surface layer until it feels slightly rough, remove the powder crumbs, and brush the second topcoat to dry. After the paint is dry, carefully polish it with 360 # sand, polish the surface layer to be slightly rough, remove the powder crumbs, and brush the third topcoat, and the construction is completed.