Xi 'an, where is the wholesale market for floor self-leveling topcoat?

1, epoxy primer coating: fully mix the main agent of the epoxy primer, then fully stir it with a professional portable mixer in strict accordance with the ratio of the main agent to the curing agent, and roll-coat or batch scrape it on the cleaned floor.

2. Intermediate coating of epoxy mortar: after the epoxy primer is dried, the epoxy resin is coated with the main agent and stirred evenly, then an appropriate amount of quartz sand is added in strict accordance with the ratio of the main agent to the curing agent (slowly while stirring), and the prepared epoxy resin is coated on the floor with a scraper to fill the holes. After completely drying, you can apply the epoxy resin scraped for the second time to increase the thickness of the floor and improve the compression resistance.

3. After the intermediate coating of epoxy mortar is completely dried, it shall be polished with a grinder and sandpaper to remove the knife marks, unevenness and particles produced by batch coating, and the dust shall be cleaned with a vacuum cleaner.

4. Solvent-free epoxy resin self-leveling coating construction: After mixing the solvent-free epoxy resin self-leveling topcoat main agent and curing agent in proportion, use a special sawtooth trowel for pouring construction to keep the ground flat and clean, and improve the corrosion resistance and pressure resistance.