Main responsibilities of injection molding technician position

The main responsibilities of the injection molding technician post are 1 1. Be familiar with matters needing attention, operate the machine correctly according to the operating rules, make qualified products, and fill in the molding daily report truthfully. If there is any interruption in the production process, such as machine repair, machine adjustment, mold change and material replacement, the time, what happened and how long it took should be clearly written on the daily report, and signed by the processor for confirmation;

2. At the beginning of each batch of production, the first part of the two molds will be handed over to the production supervisor on their own initiative, and the production can only be started after being confirmed by the quality inspection personnel; Carefully check the first sample and other samples, understand and identify the bad phenomena, and strictly abide by the quality standards;

3. When the product has quality problems and the machine is abnormal, report to the safety and related supervisor in time, isolate and identify the defective products and deal with them in time; Do a good job of product self-inspection. The middle and late shifts must keep samples for quality inspection and confirmation every 2 hours. If there is any unexpected situation that you can't solve, you must report to the shift supervisor in time. Without permission, it is not allowed to debug process parameters or repair molds without authorization.

4. Responsible for the recovery of returned materials in the production process and the feeding in the production process, and timely notify and save according to the remaining amount; Do a good job in cleaning up waste products, rods and machines and send them to designated places. It is forbidden to waste raw materials and supervise each other.

5. Trim burrs according to inspection regulations. If you are not on duty for repairs, you can only get off work after repairs, excluding overtime.

6, do a good job of shift handover. The operation of the machine, the production of products and the matters needing attention in the production process should be clearly explained to the successor. If the finishing work of the shift personnel is not done well, the shift personnel can refuse to shift and report to the shift supervisor in time. If this happens and the work is delayed, all consequences will be borne and punished by the personnel on duty;

7. Without permission, outsiders are not allowed to enter the factory privately and take public property out of the factory. They must hold the release form signed by the company leader, which can only be taken out of the company after being verified by the doorman. Once they are found to have taken public property out of the factory privately, they will be detained by the security guards and handed over to the production department for punishment according to relevant regulations.

8. Obey the leader at work, cooperate with the foreman to complete the task, be brave in taking personal responsibility and be responsible for the work you do.

9. Any loss caused by failure to follow the operating procedures. 50 yuan will be fined every time, and 10 will be deducted, which will be punished according to the price of raw materials.

The main responsibility of the injection molding technician post is 2 1. Do a good job of loading and unloading the molds of various machines in the workshop, monitor the molds produced by the machines in the workshop to prevent the destruction of human factors;

2, responsible for machine process debugging, product quality control;

3. Responsible for mold lubrication (maintenance) and production operation;

4. Observe the operation of equipment to prevent equipment failure;

5. Check whether the tools are complete and the instructions are in place before coming off work;

6. Record the equipment and molds that can't be produced normally and report them for maintenance;

7. Turn the mould quickly after receiving the notice of turning the mould, and it is forbidden to delay;

8. Be responsible for the operation skill training and operation test guidance of machine operators;

9. Assist in 6S management of machines;

10, fill in the operator's hand-over record carefully, communicate face to face with the next technician and transmit information;

1 1, which is responsible for marking the equipment status, as well as the molding parameters of various forms of machines and the spot inspection records of equipment molds;

12, responsible for completing other tasks assigned by superiors.

The main responsibility of the injection molding technician post is 3 1. Abide by the rules and regulations of the company/department and the operation management norms, and supervise the employees in this class to strictly abide by them.

1. 1 Assist the foreman in charge of the safety production management and organization of the class, and supervise subordinates to strictly abide by the safety production regulations and work according to the procedures and objectives.

1.2 according to the quality objectives/work objectives of the injection molding department, promote the development of all the work of the team and achieve the completion of all the work indicators of the department.

1.3 Assist the foreman to follow up/manage the quality, efficiency, output, delivery and raw material loss in the production process of his team.

2. Assist the foreman to be responsible for the use/maintenance/maintenance of production equipment, molds, tools and fixtures; Timely reflect or deal with the abnormal problems in mold, raw materials, equipment, technology and quality in the production process of this team.

2. 1 Be responsible for the communication and coordination of the affairs of the team, and be responsible for the training and supervision of the quality awareness of the processing methods of the employees of the team.

2.2 Supervise the working quality and efficiency of the feeder. Go to the workshop 30 minutes in advance to understand the production situation and precautions of each aircraft, do a good job of handover, patrol the aircraft and check the handover (including the "5S" production situation, etc.). ), and also make a written record, and sign the record for confirmation.

2.3 Organize the briefing of this class, convey the work requirements and precautions on duty, summarize the existing problems on duty, and do a good job of prevention.

2.4 Be responsible for tracking the production situation of each machine, whether the personnel arrangement is reasonable, making adjustments when necessary, and guiding the employees of each machine to operate according to the requirements of processing methods, quality self-inspection and packaging methods, so as to reduce the number of machine workers, reduce energy consumption and improve production efficiency.

2.5 Track the products produced by this class, and rework products must be handled on duty; Supervise the staff of this group to work according to the "5S" requirements and ensure that the "5S" area of this group can meet the standards.

2.6 Supervise employees' labor discipline, point out and correct violations and disciplines in time, and have the right to punish them when necessary.

3. Be responsible for reasonable adjustment of injection molding process and reasonable control of production cycle, strive to improve production efficiency and ensure quality standards. Strictly control the occurrence of defective products as required, analyze the causes of defective products in each machine, handle and follow up in time, and report to the superior.

3. 1 Strictly control the material consumption of each machine, analyze and track the machines or products whose material consumption exceeds the specified value, find out the solutions, report and implement them.

3.2 Try to learn new technology and management knowledge and constantly improve yourself to meet the needs of the company's development.

4. Be responsible for the inspection and supervision of the product quality of the class, and make detailed records. Any problems should be found in time and dealt with quickly to minimize bad losses.

The main duties of injection molding technician post 4 are mainly responsible for the foreman, reporting to him and obeying his work arrangement and management:

1, consciously abide by the company's rules and regulations, obey the arrangement of workshop director and shift foreman, and actively complete the tasks assigned by workshop leaders.

2. Assist the foreman to complete the production work of the shift, and operate strictly according to the molding operation instruction of the injection molding workshop, so as to ensure timely mold changing and debugging, improve the machine utilization rate and reduce time waste.

3. Participate in mold assembly, mold trial, debugging, injection molding machine maintenance, mold maintenance, improve product quality, actively improve production efficiency, reduce unnecessary waste and reduce company costs.

4. Put forward reasonable suggestions on improving production, quality and working environment.

5, responsible for injection molding machine and peripheral auxiliary equipment, found that the problem can be dealt with to solve quickly, not sure to timely report to the foreman or workshop director.

6. Debug the products in strict accordance with the process cards formulated by the workshop. Process debugging should ensure quality and quantity, reduce production cycle, save energy, reduce damage to injection molding machines and molds, and facilitate employees' operation (less burrs, easy access and few processes).

7. If there is a problem with the machine, employees should rush to the scene in time to deal with it, and they can't pass the buck. If they can't handle it well, they should report to the foreman.

8. After the machine adjustment, die change and machine repair are completed, the site should be cleaned in time, and the tools should be placed in the original position or the designated position to maintain the 5S management of the workshop.

9. Supervise the employees to operate in strict accordance with the injection molding work instruction and the safety operation procedures of injection molding machines, and be responsible for the safety production of this class.

10, the supervisor reminded employees of the self-inspection in production, analyzed and solved the quality problems found by employees, and failed to report them in time.

1 1. Check whether the baking temperature of machine raw materials meets the requirements and whether the raw materials are fully prepared. If it is not enough, remind the foreman in time. If the production is stopped due to insufficient raw materials or insufficient baking, the technician shall be held responsible for poor supervision and reporting.

12. Supervise employees to fill out various reports before coming off work. If employees are found cheating, they should stop and correct their mistakes in time. Those who don't listen have the right to criticize education and issue a ticket. Those who refuse to make corrections will be reported to the foreman or workshop director for handling.

13, assist the foreman to finish the shift task after work. (If the machine needs to replace any molds or materials, it must be explained to the relevant personnel in the next shift. )

14, when the foreman is away, he can temporarily complete the duty work of his post.

15, actively learning professional knowledge; Quickly improve their work skills; Take the initiative to play their enthusiasm for work.