What is the weighbridge house for?

The weighing room is the weighing room, which is the house where relevant weighing equipment is placed to ensure the accuracy of weighing results. As a precise measuring equipment, the weighbridge must be operated in a standardized way. If it is not used as required, it will cause many problems. How to standardize the use of electronic weighbridge? Let's know about the work responsibilities and rules and regulations of the weighbridge. First, what is the weighbridge house for?

The weighbridge room is generally installed next to the weighbridge, where the weighbridge display, control part and related printers are placed. The weighbridge room refers to the supporting facilities convenient for weighing and measuring weighbridges. It is a workshop, generally equipped with computers, printers, desks and UPS, and can be installed with monitoring. Conditional can be equipped with air conditioning, to facilitate the management and supervision of the normal operation of weighbridge facilities. The weighbridge room should be located in the middle of the weighbridge with a wide field of vision, so as to observe the overall situation of the weighbridge.

Second, the weighbridge member job responsibilities and rules and regulations

1, the floor list must be operated by a special person, and the weighing personnel can only be weighed after they have passed the training. The training method is self-study and determined by examination. The training contents include: basic knowledge of instruments, matters needing attention in use, operation methods, handling methods of common abnormal phenomena and daily maintenance methods.

2. The weighbridge personnel should check the total weight of the truck before the weighbridge and confirm that it is within the limited range of the weighbridge.

3. Before weighing, there is nothing confirmed on the weighing platform. Turn on the power supply of the weighing display instrument, and the display value of the instrument is set to zero.

4. Before weighing, make sure that the goods are packed in good condition and there is no leakage point; Vehicle-mounted emergency equipment is complete and intact; Check whether the certificates of drivers and escorts of hazardous chemicals are correct. Inform the vehicle to enter the platform. The vehicle must enter slowly according to the designated route and stop in the center of the platform. The speed should not exceed 5km/h, and all drivers should get off. Weighers operate weighing instruments, obtain stable readings and fill in weighing results.

5. The staff of the weighbridge company must clean the weighbridge platform every day and remove the scattered objects on the weighbridge in time. Daily routine check, fill in the routine check list. The equipment department is responsible for regular weighing and verification to ensure that it cannot be used beyond the specified time limit.

6. Every quarter, month and week, the company staff informs the electrician to measure the ground wire of the weighbridge, and the resistance is less than 4Ω, which is normal. If there is any abnormality, report it to the Equipment Department for handling in time.

7. Company personnel shall notify relevant departments to adjust the longitudinal limit of the weighing platform every six months, months and weeks.

8, thunderstorm weather, the company pound personnel must always check the water level below the scale, such as beyond the warning line, immediately report to the equipment department for disposal.

9. If liquid leaks during weighing, the vehicle should be driven away from the weighing platform and disposed of according to the chemical emergency plan. The corroded part of the weighbridge must be sucked dry. Solid leakage should be cleaned immediately, leaving no residue.

10, resolutely implement the principle of "nine prohibitions" in the use of weighbridges;

(1) It is forbidden to connect the instrument with electricity;

(2) It is forbidden for vehicles to turn on the platform;

(3) It is forbidden to overspeed;

(4) vehicles are prohibited from staying on the weighing platform for a long time or staying overnight;

(5) It is forbidden to conduct electric welding on the platform or use the platform as grounding wire;

(6) It is forbidden to work in thunderstorm weather;

(7) It is forbidden to clean the weighing instrument with strong solvent;

(8) prohibit liquids and conductive particles from entering the weighing instrument;

(9) It is forbidden to open the back cover of the monitor without authorization.