What precautions should be taken when ironing summer clothes with an electric iron?

Deformed trousers: After wearing trousers for a long time, a large bulge will often appear in the knees. For such deformed trousers, it is best to use an electric steam iron and iron the second half of the trousers first. When ironing, first straighten the back half of the trousers with your hands, stretch out the wrinkles and then iron until the back half of the trousers returns to its natural state. Then iron the front part of the pants. When ironing, because the front half of the knee has bulged, if the pants are straightened, the front half will wrinkle. At this time, iron the upper and lower parts of the trousers first. Place the iron gently on the trousers and press the steam switch to allow the wrinkled parts to shrink naturally under the heat of the iron. The same method is used on the knee area. When the big bulge turns into a small bulge, continue to use the above method. Repeat this method to restore it to its original shape. Finally, iron the entire pants again.

Synthetic fiber: Chemical fiber clothing has poor moisture absorption and different heat resistance. Therefore, mastering the ironing temperature is key. The ironing method is basically the same as other cotton, silk and wool fabrics. Nylon fabric is wear-resistant and elastic, but the ironing temperature should not be high, so you should use a dry cloth as a pad before ironing. Polyester fabric is both wear-resistant and wrinkle-free, so you can just dry it after washing without ironing. Since there are many types of chemical fiber clothing, it is difficult to control the temperature. Before ironing for the first time, you can try ironing an inconspicuous part of the clothing to avoid ironing damage.

Cotton and linen fabrics: You can turn up the steam volume. Generally, the method of ironing the inside is used. If the front is ironed, a clean white cloth should be used. Colored clothes should be ironed on the inside first, and the temperature should not be too high to avoid shiny reflections or discoloration after ironing, making the clothes brittle and damaged. When ironing linen fabrics and cotton and linen blended fabrics, the iron temperature should be low, the clothes should be ironed first, and ironing should be done with a cloth to prevent fuzzing from damaging the clothes.

Silk fabrics: Silk clothing has poor anti-wrinkle properties after washing and often shrinks. If not ironed, it will affect the appearance, so silk clothing must be ironed after washing. When ironing, the temperature should be appropriate and the method should be appropriate. For low-temperature ironing, the iron temperature is generally between 110°C and 120°C. Too high a temperature can easily cause the clothes to discolor, shrink, soften, and deform. In severe cases, it can even damage the clothes. The temperature of clothes with bright colors and light colors and blended silk clothes should be lower. Don't use too much force when ironing. The iron should keep moving and don't stay in one place for too long. Do not iron the silk surface directly with the iron. Iron it with a cloth or iron the reverse side of the clothing to prevent aurora. Branded water stains affect the appearance and washing quality.

Tie: The fabric used to make the tie is mostly silk, and the lining is usually lined with fine cloth or fine linen. Use low to medium heat, iron quickly, use a dry cloth when ironing, and do not let steam get directly onto the tie.

Pleated skirt: Iron the skirt head first, fix the position of all pleats, and then iron the pleats one by one. After ironing each fold straight, lift up the pleats and iron the bottom to further fix the pleats.

Shirts: Iron from top to bottom. Collar: Iron from the outer ends of both sides to the middle; Sleeves: Iron from the bottom of the sleeves to the shoulders; Body: Iron the front first, then the back.

Suit trousers: Turn the trousers over and iron the inner trouser pockets straight; put the trousers back to the front, iron from the inside to the outside of the surface of the trouser legs, and then iron the bottom of the trouser legs. It is not suitable for direct ironing. Put a thin cloth on it before ironing.

Tang suit: You should choose electric steam iron for ironing. The temperature should be moderate, usually 30-40 degrees.

Summer foreign objects do not require too high a temperature and can generally be ironed below 100 degrees. There is no need to spray water before ironing, just use steam. After ironing, hang it up and let it dry naturally.

Personal opinion. I don’t know if I am satisfied or not.