Guiyang car film price list, master film chain film specialty?

At present, there are many car film brands on the market, and the prices range from hundreds to thousands. The price of car film is generally determined by which brand you choose. The following small series lists the prices of 10 films and their advantages and disadvantages.

Precautions for car film pasting

Before pasting:

1. When shooting a car, washing the car in advance can make full preparations for shooting. Otherwise, it will be difficult for the film maker to clean the glass. If the car glass is not cleaned, it will affect the film pasting effect.

2. Choose a solar film with good transmittance when pasting the film. Even if the color of the film is dark, the scenery you see should be transparent and not dim and deformed. Especially at night, if the light transmittance is not strong, the driver's sight at night will be bad;

3. Choose a membrane with high thermal insulation rate. A good solar film should have a good heat insulation effect, which can prevent ultraviolet rays from being absorbed. Even when the sun is toxic, it can also play a role in heat insulation. It is best to watch a movie in the sun.

4. If the edge of the car film bubbles, it should be repaired at the construction site within 24 hours. If it exceeds the time, the rubber around the bubble has dried out, and the periphery of the car film can no longer move, which will definitely produce creases.

5. When pasting the film on the first two windows, the film cannot block the driver from looking at the rearview mirror, and poor pasting will affect the line of sight;

6. When sticking the car film, you can't just stick it in the car beauty shop on the side of the road. Many places are killing people, and inferior films can cost a high price, so you have to go to a regular large-scale automobile beauty repair shop and have a good reputation.

After film pasting:

1. After the Wrigley film is attached to the front bumper, stop during the day and get as much sunshine as possible, which will make the front bumper film dry faster. It usually takes about half a month to completely dry, including the rear gear;

Don't wash the car for three days. Due to the high water pressure of professional car washing equipment, water can easily penetrate from the edge of the window, which will cause a large water content at the edge of the glass and film. After three days, it is easy to cause the edge of Wrigley's car film to fall off when lifting the window.

3. Avoid lifting the window within three days after the car is pasted. Because there is still water between the window glass and the newly pasted film, lifting the window glass at this time will easily cause the edge of the film to fall off, which will seriously make the film unable to stick to the glass again;

4. Do not start the window within 3 days after pasting, otherwise it will affect pasting; In addition, it is forbidden to stick the super glue label directly on the film within one month, so as not to cause the film to separate from the glass;

5. After pasting Wrigley film in winter, it is recommended not to lift the window or wash the car for a week.