Marble crystal machine crystal surface maintenance process

1. Wet grinding process using stone crystal powder: add water to mix the stone crystal powder and water into a slurry (ratio is 1:6). Use a marble crystal grinder and a scouring pad to grind it for 3-5 minutes. Keep the ground moist, wash it lightly with clean water and suck it dry with a water absorber. Finally, lightly polish the marble crystal surface machine with the new fiber pad installed for 2-3 minutes for better results!

2. Dry grinding process with stone crystal powder: add water to mix the stone crystal powder and water. Paste (ratio 1:1). Use a marble crystal grinder with a fiber pad to grind and dry the ground. (When the resistance of the marble crystal noodle machine increases, that is, when the crystallization layer of the crystal noodle slurry is formed, you can spray a little water on the ground until the grinding is dry).

3. Observe the brightness and oiliness of the ground crystal layer. You can apply the above method twice to achieve a satisfactory crystal surface. You can hand over the work directly when doing renovation projects.

4. After the ground is dry, clean dust can be used to push the dust away.