What walls can't be smashed when decorating? Matters needing attention in wall smashing during decoration.

What walls can't be smashed when decorating? Precautions for smashing the wall: it is very important and basic that the load-bearing wall cannot be demolished. At the same time, when there are water and electricity lines in the wall, it is necessary to control the main water and electricity valve. You can ask the plumber to do a good job of hydropower transformation in the construction part in advance, so that the impact on hydropower facilities can be reduced during construction. The area of the wall to be demolished and the size, location and use of the holes in the wall should be reasonably determined according to the needs.

It is suggested that you must find a professional wall knocker when knocking on the wall:

1, especially boring, is more professional, knowing which walls are load-bearing, counterweight and partition, and knowing which walls can and cannot be demolished.

Although knocking on the wall is rough work, it should be done carefully. The experienced master who knocks on the wall can minimize the adverse effects of knocking on the wall vibration on the house and paint layer.

It is also dangerous to knock on the wall. Professional wall knockers can safely complete the construction, and can effectively deal with wires and steel bars in the wall. In addition, professional masters have relatively complete construction tools, which can successfully complete the task.

4. In addition, in the operation, if the owner has no time to be present all the time, he must explain the wall to be knocked on to the wall knocker and mark it with chalk to avoid being knocked on the wrong wall by the construction personnel.

I hope the above contents are helpful to you.

What walls can't be beaten when decorating, and what walls can't be beaten when decorating?

1. External wall: The external wall of a building includes the top surface and the ground.

2. counterweight wall: there is a door and a window on the wall between the general room and the balcony. These doors and windows can be removed and replaced, but the wall under the window can't be moved. This section of the wall is called the "counterweight wall", which plays the role of supporting the balcony like a heavy object. Demolishing this wall will reduce the bearing capacity of the balcony and lead to the balcony falling.

3. Load-bearing wall: In general brick-concrete buildings, all prefabricated walls cannot be removed or opened; Brick walls over 24 cm are also load-bearing walls. In addition, it is not allowed for someone to open the door and open the window on the load-bearing wall, which will also damage the load-bearing of the wall.

4. beams and columns in the room: these beams and columns are used to support the upper floors. After the demolition, the upper floor will collapse, so you can't move.

5. Reinforcement in the wall: Reinforcement is the bone in the wall. If the steel bar is destroyed when the pipe is buried, it will affect the bearing capacity of the wall and floor. If there is an earthquake, such walls and floors will easily collapse or break.

6. Toilet and kitchen: These places have waterproof layers on the ground. If they are damaged, it will lead to leakage. If it is destroyed and rebuilt, a "24-hour water seepage experiment" must be done.

7. Floor: Some villas or friends who jump off a building feel that the location of the stairs at home is not ideal and want to change the location. Remember, if you want to make a hole in the floor, you must find a qualified structural engineer to design the demolition and reinforcement scheme, and don't take it for granted.

Matters needing attention in decoration and wall smashing

1. Go through the relevant formalities at the property before renovation.

Be sure to say hello to the property before the family decoration, and all the procedures have been completed. Ask the person in charge of the community about the structure of their own building to avoid things that affect the lives of neighbors because of their own decoration.

2, hit the wall to find a professional wall-hitting master.

You must find a professional wall-smashing master when you smash a wall, because a professional wall-smashing master will know which walls are load-bearing walls, balance walls and partition walls, which walls can be demolished and which walls cannot be demolished as soon as he enters the room. This can avoid accidents. The load-bearing wall is broken, and everyone is in trouble.

3. Prepare for dust prevention before decorating the wall.

Before hitting the wall, be prepared for dust prevention. Because the wall is made of sand and cement, it will produce a lot of dust when it hits the wall. At this time, dustproof is very necessary. Things that are afraid of dust, such as refrigerators, color TVs, telephone washing machines, water meter doorbells, etc., should be covered with some newspapers and plastics to avoid falling dust and being difficult to clean.

4, decorate water pipe line to check in detail.

Because many developers embed the water pipe circuit into the wall, we must check the installation of the water pipe circuit of our household appliances before hitting the wall to avoid hitting the water pipe circuit when hitting the wall.

I hope the answer from the escort network can help you.

Matters needing attention in Jining wall-smashing construction: which walls can't be smashed in home decoration? Generally, concrete walls are load-bearing walls, and hollow bricks can be removed.

It's best to ask about the property before smashing it, so as to save trouble when looking for the property. After all, the whole building belongs to everyone.

What are the precautions for wall decoration? What are the steps for wall decoration? First, determine whether it is a load-bearing wall; Demolition of the block wall should start from the bottom and then gradually dig up a little (with the help of the gravity of the block, the block will gradually fall). Note: if there is floor heating, you need to protect the ground!

I believe everyone is familiar with the renovation of the wall. This is the first step for us to start decorating. As the saying goes, "break before you stand." In order to meet the design requirements and make the layout of the new house more reasonable and the decoration more beautiful, the first thing to do at the beginning of each decoration is to smash the wall. So what are the precautions for decorating the wall and what are the steps for decorating the wall? First, a series of wall renovation activities, such as knocking on the wall and making holes. In the strict management of residential areas and streets, it is necessary to inform the property and go through the formalities to avoid the complexity of construction and affect the decoration plan. Second, when the decoration knocks on the wall, the noise and vibration are great. If there are neighbors around, it will have an impact on the lives of neighbors. Therefore, before the construction, you should greet your neighbors in advance to gain their understanding and support, so as to make the project go smoothly. Third, the load-bearing wall must not be removed, which is very important and basic. At the same time, when there are water and electricity lines in the wall, it is necessary to control the main water and electricity valve. You can ask the plumber to do a good job of hydropower transformation in the construction part in advance, so that the impact on hydropower facilities can be reduced during construction. The area of the wall to be demolished and the size, location and use of the holes in the wall should be reasonably determined according to the needs. Fourth, some owners privately find someone to knock on the wall. It is suggested that you must find a professional wall knocker when knocking on the wall. 1. They are more professional and know which walls are load-bearing walls, balance walls and separation walls, and which walls can and cannot be demolished. Although knocking on the wall is rough work, it should be done carefully. The experienced wall-knocking master can minimize the adverse effects of wall-knocking vibration on houses and paint layers. It is also dangerous to knock on the wall. Professional wall knockers can safely complete the construction and effectively handle the wires and steel bars in the wall. In addition, professional masters have complete construction tools and can successfully complete the task. In fact, due to negligence and inexperience, casualties caused by improper construction of amateur wall bumpers also occur from time to time. 5. In addition, in the operation, if the owner has no time to be present all the time, he must explain the wall to be knocked on to the master. He can draw it with chalk and mark it well to prevent the builders from knocking on the wrong wall. There are so many precautions for smashing the wall in the decoration. The above also introduces in detail the matters that should be paid attention to in the renovation of the wall, for your reference. I would like to remind everyone that in the process of wall-smashing, we must explain the specific parts of the wall-knocking to the builders, which can be marked with a pen and color to avoid the construction master knocking on the wrong wall.

What are the precautions for the renovation of new houses? 1. First of all, the load-bearing wall cannot be smashed, which greatly affects the structural safety of the whole house. You must not smash it. If you are complained, you will ask for rectification and fine.

2. The beam is also a load-bearing structure, so it can't be smashed. The beam carries the floor, and if it is damaged, it may make the floor fall!

3. The wall connecting the balcony. This wall is called "counterweight wall", which plays the role of provoking the balcony. If you smash it, it will cause the balcony to fall, so you can't smash it.

Not all bay windows can be smashed. Some bay windows are hollow, and this one can be smashed. However, some bay windows are reinforced concrete, which are integrated with the wall and cannot be smashed.

5. The outer wall can't be smashed.

6. After smashing the old wall, we should pay attention to the repair work. The junction between the smashed wall and the reserved wall is often damaged and needs to be repaired, otherwise there will be problems in the future decoration.

What walls can't be beaten when decorating, and what should be noted? Matters needing attention in building renovation: 1 Cannot be destroyed. 2. It is noisy to hit the wall, so you need to say hello to your neighbors in advance and finish it within the construction time specified by the community. Before hitting the wall, you can mark the wall that needs to be demolished with a pen in advance, indicating that it is * * *. 4 When meeting the connection of two walls, cut off the cement layer of both walls, which can reduce the damage of the wall surface. 5 when hitting the wall, cut off the corresponding water and electricity pipelines on the wall in advance and do a good job in reconstruction. Precautions for house decoration acceptance: 1 Water and electricity acceptance Check the achievements of water and electricity transformation, and check whether the position of socket switch waterway is in place. 2 Mid-term acceptance Mid-term acceptance mainly checks the flatness of the wall surface and the hollowing of the wall surface and floor tiles. 3 Waterproof acceptance After the bathroom and kitchen are waterproof, it is necessary to do a 24-hour closed water test. 3. Check whether the decoration process is in place, whether the wall is flat, and whether the doors and windows can be opened and closed normally.

What walls can be demolished for decoration? Precautions for wall demolition in decoration 1. main wall

2, the reinforcement in the wall

3. Beams and columns in the room

4. The low wall next to the balcony is called "counterweight wall".

5. If the "three-proof" or "five-proof" doors are removed, the building structure will be destroyed and the safety factor will be reduced.

6. There is a waterproof layer on the bathroom floor, so you can't move.

Who knows the points for attention in decoration and knocking on the wall? What are the points for attention when knocking on the wall in decoration: 1. The top beam can't be removed: some owners think that the beam at the top of the house will affect the appearance during the decoration, and plan to knock out some prominent beams. Originally, the beam of the house foundation must not be knocked, because the beam supports the upper floor, and knocking on the wall or renovation will constitute the upper floor falling off the building. Another thing to note is that if some walls are connected by beams, you can only knock under the beams when you knock on the walls. For example, the wall between the bedroom and the study should be knocked off in this construction site, but there are beams on the wall, so you can't move here, otherwise there will be security risks. You can't knock on the beam, but you can hide the beam with the ceiling without affecting the appearance. 2. Don't knock on the wall connecting the balcony: In order to improve the lighting of the room, some owners knock off some walls connecting the balcony to increase the width of the balcony door, which is not allowed. Because the external walls of houses are generally load-bearing walls, it is very risky to make holes and open windows on them. In addition, some rooms have a window and a door on the wall between balconies. These doors and windows can be knocked, but the wall under the window cannot be knocked off. This wall on the window line is called "counterweight wall", which plays the role of provoking the balcony. If this wall is torn down, it will reduce the bearing capacity of the balcony and cause it to fall. 3. Stop tearing down the load-bearing wall: Many people know that the decoration cannot tear down the load-bearing wall. But not many people can tell what kind of wall is a load-bearing wall. A load-bearing wall is a wall without precast ring beams. The wall thickness of load-bearing wall is obviously thicker than that of non-load-bearing wall in plan view. The original wall thickness is usually 24 cm, and the non-bearing wall thickness is 10 ~ 15 cm. Exterior walls are generally load-bearing walls, and the walls used in residential areas are also load-bearing walls. Usually non-bearing walls are in bathrooms, storage rooms, kitchens and aisles. In a word, carelessly transforming the structure and tearing down the wall will affect the structural safety of the house. If the owner carries out structural transformation of the house, he needs to look at the floor plan of the building structure to see which are the load-bearing walls, and then consult relevant professionals before construction. 4. The repair work after the wall is demolished cannot be saved: the wall is knocked out safely, but the later repair work cannot be ignored. For example, to destroy the original wall and build a new wall with red bricks, it is necessary to set lacing bars on the wall of the new building. "Bracing" is a local construction method for the joint of new and old walls, that is, the new and old walls are pulled with steel bars to ensure the stability and seismic capacity of the walls. In addition, dig a doorway in the wall, and set a reinforced concrete "beam" above the doorway, so as to manage the pressure of the wall above the doorway and avoid the pressure of the wall above directly pressing on the door frame.

Precautions for wall planing in decoration: Demolishing walls in decoration is to remove redundant walls instead of load-bearing walls, forming another pattern. In order to ensure the safety of decoration, at least the following five details should be paid attention to when changing the housing structure. 1. The top beam cannot be removed. The beam in the middle of the house cannot be removed or changed, because the beam supports the upper floor. Removing or changing it will cause the upper floor to fall. In addition, it should be noted that if some walls are connected by beams, they can only be removed under the beams when they are removed. Don't tear down the wall connecting the balcony. In addition, some rooms have a window and a door on the wall between balconies. These doors and windows can be removed, but the wall under the window cannot be removed. 3. It is forbidden to dismantle the bearing wall. 4. The repair work cannot be saved after the wall is demolished. For example, if the original wall is demolished and a new wall is built with red bricks, it is necessary to set lacing bars on the new wall. 5. Before tearing down the wall, it should be reported to the property for approval. At the same time, non-bearing walls like 120- 150 can only be pulled down. In addition, as long as there are no beams and pipes on the wall, they can be removed.