Why can't the sliding drawer be pushed half open?

Calculate how much it will cost to decorate your home.

In order to facilitate the opening and closing of drawers, slide rails are usually installed on drawers. However, some problems will inevitably occur in the long-term use of drawer slide rails, such as: getting stuck in the middle and not opening. Then why can't the slide drawer be pushed half open? Let's study with Bian Xiao.

Why can't the sliding drawer be pushed half open?

There are many reasons why the sliding drawer can't be pushed in, and the treatment methods are different, as shown in the following figure:

1. The drawer of the slide rail can't be pushed in because there is no lubricating oil on the slide rail. At this time, just drop some lubricating oil at the position where the slide rail is stuck.

2. The sliding drawer can't be pushed half open. It may also be caused by the dislocation of the ball on the drawer and the track of the slide rail. At this time, just lift the drawer and push it in hard.

3. The slide drawer is pushed less than half, which may be caused by the damage of the slide. At this time, it is necessary to purchase slide rails of the same specification and model for replacement. If the owner can't replace the slide rail himself, it's best to find a professional installation master to help replace it.

4. If it is determined that the slide ball is not misaligned with the track, the drawer cannot be pushed in after using lubricating oil, which may be caused by the deformation of the drawer. At this time, it is necessary to disassemble the slide rail of the drawer with relevant tools, and then inspect all parts of the drawer in detail, and then take corresponding measures to deal with it.

5. When installing and disassembling the drawer slide rail, you must master the correct installation and disassembly steps, otherwise it will easily lead to the phenomenon that the drawer slide rail cannot be opened and stuck. At this time, it is generally necessary to remove and reinstall the drawer slide rail, which will bring unnecessary problems and troubles.

The above is a detailed introduction about why the sliding drawer can't be pushed open, and I hope it will help everyone. It is suggested that you must master the correct installation and disassembly methods of the drawer slide rail, which can effectively avoid the phenomenon that the slide rail drawer cannot be pushed in.

Enter the area and get the decoration quotation for free.