How to set up a third-party testing organization

Legal analysis: the steps of registering a third-party testing company: step one, register the company, and different regions also have requirements for registered capital, at least 500,000 registered capital; Step 2: After industrial and commercial registration is completed, it is necessary to purchase instruments and equipment and recruit chemical analysis engineers. The instrument must be a national standard chemical analysis instrument certified by CMC. The basic instruments are: gas chromatograph, spectrophotometer, soap film flowmeter, analytical balance, atmospheric sampler, radon detector, drying box, etc. Step 3: The personnel need at least one senior chemical analysis engineer and several chemical analysis engineers; Step 4: After a trial run of at least three months and a complete laboratory management system is established, apply to the Provincial Quality Supervision Bureau for metrological certification; Step 5, the Certification Department of the Provincial Quality Supervision Bureau will inform you when to conduct on-site review; Step 6: On-site evaluation (this is the most critical). If there are few projects applying for certification, two people will come, one is the team leader in charge of quality system inspection and the other is the expert in charge of technical inspection. Step 7: On-site audit will generally produce some unqualified items, as long as there are not too many, it is generally no problem. The eighth step is to rectify the unqualified items for at least one month. After the rectification is completed one month later, submit relevant written certificates to the team leader; Step 9: Wait for the CMA measurement certificate to be issued.

Legal basis: Article 19 of People's Republic of China (PRC) Product Quality Law stipulates that product quality inspection institutions must have corresponding inspection conditions and capabilities, and can undertake product quality inspection only after passing the examination by the market supervision and management department of the people's government at or above the provincial level or its authorized department. Where laws and administrative regulations provide otherwise for product quality inspection institutions, the provisions of relevant laws and administrative regulations shall prevail.