Job Recruitment Website - Job information - How to set the punching runout of die-cutting machine

How to set the punching runout of die-cutting machine

1. Check whether the center line of the die-cutting machine is correct and ensure that the steel roller of the machine is in the correct position.

2. Turn on the machine and confirm whether the skip parameters are set correctly. If not, adjust them to the correct skip parameters.

3. Confirm whether the skip depth setting is correct. If not, adjust the skip depth to the correct value.

4. Confirm whether the skip width setting is correct. Otherwise, adjust the skip width to the correct value.

5. Place the material on the drum plane, check whether the effective stroke of the hopper is correct, and adjust the effective stroke to the correct position.

6. Update the cursor on the die cutting machine to the designated skip position to ensure that the skip operation is executed correctly.

7. Open the die-cutting machine, check whether the paper skipping operation is correct, and adjust the paper skipping parameters to the correct position to ensure the normal die cutting of materials.

8. Every time the skip parameters are adjusted, die-cutting test should be carried out to ensure the normal die-cutting effect.