How much does it cost to sew beautiful tiles in Nanjing? Construction steps and methods of leveling beautiful brick.

As we all know, when laying tiles, there will be gaps between tiles, and these gaps need to be filled with a beautiful joint agent. So, how much is the sewing agent? What are the construction steps of the sewing agent? The following is a detailed introduction: how much is a flat tile in Nanjing, and the construction steps and methods of tile joints? I hope I can give you some help and inspiration!

How much is a flat of Nanjing tiles?

How much is a flat tile in Nanjing? First of all, the price of a tile caulking agent is generally around 70-80 yuan, and 00ML of caulking agent can fill the gap of 3 square meters of tiles. Therefore, the price of a square meter of tile sealant is generally around 20-30 yuan. Friends in need had better go to the physical store for detailed consultation and understanding, so as to know fairly well and not be cheated.

Construction steps and methods of ceramic tile joints;

Tools/raw materials:

Beautiful sewing agent, empty plastic bucket, glue gun, textured paper, sewing knife, spatula, vacuum cleaner, brush, bedding treasure, disposable gloves.

Construction steps:

1, first measure the length of the gap with a ruler, which is convenient for calculating the material consumption.

2. Dust should be removed from the surfaces and gaps of ceramic tiles.

3. Clean the dust with a brush or vacuum cleaner to ensure that there is no dust and impurities during construction.

4, before the construction, to put masking paper on both sides of the gap, but can't stick to the gap, to ensure that the standard is consistent.

5. Prepare tools such as ceramic mud, empty plastic bucket, plastic gun and spatula.

6. Take out the caulking agent and stir it evenly, then stir it for 3 minutes, and then use a scraper to enter the gap for construction.

7, along the ceramic tile gap evenly into the material.

8. Scrape the material in the gap with a spatula.

9. Tear off the textured paper, but don't drop the extra material on the floor.

10, clean up the construction site, and don't trample or touch the water before the materials are wet.

Precautions for joint of ceramic tile:

1, and the gap should be cleared by 2mm2. During construction, both sides of tiles should be pasted with masking paper to ensure the consistency of standards.

3. Tear off the masking paper in time after the construction is completed, and don't drop the extra materials on the floor.

4, the material is not completely dry, don't trample, wet.

It takes 24 hours to walk on it.

Abstract: This paper introduces the knowledge of how much it costs to sew beautiful bricks in Nanjing and the construction steps and methods of beautiful bricks. In fact, the construction method of beautiful brick is very simple. As long as the materials are ready, the dust on the ground and in the gap is cleaned and flattened.