How to use automatic paper pasting machine

The paper pasting machine is simple in structure, and can be used for pasting paper of different sizes on one side, partially and integrally, so it is welcomed by many enterprises. The use of automatic paper pasting machine is very simple. First, turn on the power supply to start the machine, adjust the machine according to the paper specifications, then adjust the parameters of the machine accessories, finally put in the paper, and press the switch to work automatically. Before using the paperhanger, it is necessary for us to know its safe operating procedures, and then let's have a look with Bian Xiao. What are the safe operation procedures of the paper pasting machine?

1. Before starting the machine, according to the lubrication chart, add an appropriate amount of lubricant to the parts that need lubrication.

2, carefully check the fasteners, such as screws, handles and other parts for looseness or fall off.

3. Before starting the machine every time, you must check whether there are sharp and hard sundries between the drum and the belt.

4. Start the machine for a few minutes, check whether there are abnormal sounds in all moving parts of the machine, and check whether the emergency stop and control buttons are sensitive and effective.

5. The operating handle, switch button, adjusting device and safety device are in the normal stop position.

6, in the process of machine operation, often check whether the motor, reducer, blower, control box is normal operation, such as noise, leakage and other abnormal phenomena immediately stop maintenance, to work after troubleshooting.

7. When stopping the machine, release the roller pressure everywhere and lower the paper feeding table to the lowest position.

8. After shutdown, the operating handle, switch button, regulating device and safety device are in normal positions.

9. Wash the drum and wipe it clean. Pay attention to the low speed of the machine.

10, stop and turn off the switch of the power switch and the fuse EA-53B on the side of the control box.

1 1. Wipe the dust and oil stains on the machine surface with water, clean up the surrounding sundries and put the tools in order.

12. When starting the machine, non-operating personnel are not allowed to get close to the machine to avoid personal injury caused by emergency operation of the machine.

13. When the machine is running, do not open the door to touch or adjust the belts, gears and chains in the box. If inspection, adjustment or repair is needed, the machine must be stopped and the power supply cut off.

14. When the machine is running, the rotating speed of different rollers is very high, and the corresponding rollers are very close. When working, don't touch it with your hands, stop it if necessary, and adjust the measurement after power failure. If you need to rub glue on the press roller, you must wrap the wiping cloth and hold it firmly.

15. When cleaning the machine after the operation is completed, first rinse the rubber coated with rubber rollers with clear water. Then, stop the machine and cut off the power supply, and then clean the residual glue on the machine. If necessary, it can be cleaned by inching or manually.

How to use automatic paper pasting machine

1. Turn on the power to start the machine and adjust the machine according to the paper specifications.

2. Turn on the gluing control of the touch screen and adjust the data of the glue pump, main machine, laminating machine, exhaust fan and air pump.

3. Put the paper into the automatic paper pasting machine, and take it out manually after the paper pasting machine.

4. After the operation is completed, turn off the power and clean the machine.