The main contents of construction retest work

What is the main content of construction retest? The work of line survey includes midline survey, datum survey, middle survey and cross-section survey. The task of line retest is to check the accuracy of the original pile point, not retest.

When the difference between the retest and the fixed measurement results is within the tolerance range specified in the specification, the fixed measurement results shall be adopted and shall not be changed. When the difference between the survey results and the survey results exceeds the allowable range, the reasons should be found in many ways. If it is confirmed that the survey data is wrong or the accuracy does not meet the requirements, the survey results can be adopted after the consent of the survey and design unit, but the changes should be limited to a local scope as far as possible.

The center line of the line is the plane control system of the line construction, and it is also the main axis of the subgrade, so the position must be kept correct during the construction. Before the construction of the line, the center line survey must be carried out to restore the center line pile during the survey; At the same time, the reliability of fixed measurement data (line plane control points, elevation control points, etc.) should also be checked. ), this is called line retest.

What are the main contents of the investigation in the construction stage? The main task of construction survey is to correct the plane position and elevation of the buildings (structures) designed on the drawings to the construction working face according to the design requirements through positioning, setting out and inspection, so as to understand the construction situation. Construction survey runs through the whole construction survey. The essence of construction quantity is measuring and setting points. Through the distance, angle and elevation of the layout, the points, lines,

Briefly describe the types and main contents of construction preparation. Answer: (1) Types of construction preparations.

According to the construction stage of the project:

According to the construction stage of the project, construction preparation can be divided into construction preparation before construction and construction preparation under the operation conditions of the project.

According to the compilation scope:

According to the work scope of construction preparation, construction preparation can be divided into overall construction preparation, unit project construction condition preparation and division project operation condition preparation.

What are the main contents of bid evaluation in construction bidding?

Answer: The bid evaluation work is divided into two parts: commercial bid and technical bid.

1, main contents of commercial bid evaluation:

(1) The content is complete and the project is complete;

(2) The quotation is reasonable and moderate;

(3) the difference between the test quotation and the pre-tender estimate;

(4) If the pre-tender estimate is composite, check the difference between the quotation and the composite bid price;

(5) Scoring the test results according to the bid evaluation method;

2, the main content of the technical standard part of the bid evaluation work;

(1) The completeness of construction organization design content, feasibility of methods, advanced technology and reliability of technology, such as time limit for a project, quality measures, safety measures, civilized construction measures and cost measures. Whether it is unrealistic or divorced from reality, and whether the content contained is false or untrue;

(2) Whether the staffing is appropriate, especially whether the arrangement of technical personnel is sufficient;

(3) Whether the equipment is advanced and can meet the construction needs;

(4) Whether the practices of materials from procurement to use are advanced and reasonable;

(5) Whether the various guarantees of the enterprise are effective (financial guarantee, material guarantee and human guarantee);

(6) According to the completed and similar projects under construction, whether the bidder has the ability to complete this project;

1. Main contents of civil affairs work. Implement the principles and policies of the party and the state and the policies and regulations related to civil affairs, formulate the annual civil affairs work plan and organize its implementation, and assist the town party Committee to do a good job in civil affairs.

Second, under the leadership of the Party Committee and * * *, organize the implementation of emergency rescue and disaster relief, and formulate emergency plans for emergency rescue and disaster relief; Timely and accurately report the disaster situation, manage, distribute and distribute relief funds and materials, organize and guide social fund-raising, and be responsible for the production and living difficulties of the relief objects and temporary social assistance.

Third, in accordance with the Regulations on Pensions and Preferential Treatment for Soldiers, the Military Service Law of People's Republic of China (PRC) and the relevant documents of provinces, cities and counties, we should do a good job in pensions and preferential treatment for the families of the "three families", disabled, rural demobilized soldiers and servicemen, and do a good job in supporting the army and giving priority to their families.

Four, the implementation of the minimum living security system for urban residents and rural residents, the declaration and issuance of the minimum living security, the implementation of dynamic management, and gradually realize the full coverage.

Five, the implementation of rural five guarantees policy, so that orphans and widows should be guaranteed; Do a good job in the supervision and management of nursing homes.

Six, do a good job in the ideological education of civil affairs objects, and deal with letters and visits related to civil affairs.

Seven, strict financial discipline, manage the cost of civil affairs.

Eight, in accordance with the "Regulations" of funeral management, do a good job in funeral management.

Nine, on time to complete the tasks assigned by the Party committee, * * * and the higher authorities.

The main content of web front-end work The main responsibility of the front-end development engineer is to cooperate with interaction designers and visual designers to complete the page production with HTML and CSS according to the design drawings (or it may be done by one person). At the same time, on this basis, maintain the completed pages and optimize the front-end performance of the website accordingly. In addition, a qualified front-end development engineer should have certain aesthetic ability and basic artistic operation ability, and be able to interact and cooperate visually well.

Today's front-end engineers may need a full stack to some extent, that is, both front-end and back-end need to be able to meet it. Not only do you need to make static pages, including website architecture, H5, etc.

Now the recruitment of web front-end in the market requires that you can write JS, use JS, design, cut pictures and understand user interaction. It also requires that the front-end architecture is a development optimization framework, as well as a server, which has a wide user experience. Of course, the salary of the front-end engineer of the full stack is relatively high.

The main contents of bridge construction survey are the plane position and elevation of each structure of bridge, the plane position and elevation of the four corners of foundation.

The main contents of the work of the local taxation bureau are: some value-added tax, business tax and urban construction tax, enterprise, personal income tax, resource tax and stamp duty. All urban land use tax, cultivated land tax, land value-added tax, property tax, travel tax, deed tax and banquet tax. The taxes collected by enterprises are mainly local enterprises, collective enterprises and private enterprises.

Promotion strategy is one of the basic strategies of marketing mix. Promotion strategy refers to how an enterprise transmits product information to consumers or users through various promotion means such as personnel promotion, advertising, public-private relations, business promotion, etc., so as to arouse their attention and interest, stimulate their purchasing desire and behavior, and thus achieve the purpose of expanding sales. There are generally two ways for enterprises to convey the information that the right products are sold at the right place and at the right price to the target market: one is personnel sales, that is, face-to-face sales between salesmen and customers; The other is non-personnel marketing, that is, transmitting information to a large number of customers through mass media at the same time, mainly including advertising, public relations and business promotion. These two promotion methods have their own advantages and disadvantages, which complement each other. In addition, catalogues, notices, gifts, store logos, exhibitions, demonstrations, exhibitions and trade fairs also belong to the scope of promotion strategies. A good promotion strategy can often play many roles, such as providing information in time and guiding procurement; Stimulate the desire to buy and expand the demand for products; Highlight product characteristics and establish product image; Maintain market share, consolidate market position and so on.

According to the different starting points and functions of promotion means, it can be divided into two promotion strategies:

1. Push strategy, that is, push the products directly to the sales channel by means of personal promotion. Its function process is that the salesman of the enterprise recommends the product or service to the wholesaler, and then the wholesaler recommends it to the retailer, and finally the retailer recommends it to the final consumer. This strategy is suitable for the following situations: (1) The business scale of the enterprise is small, or there is not enough funds to implement a perfect advertising plan. (2) The market is concentrated, the distribution channels are short, and the sales team is large. (3) Products have high unit value, such as special products and optional products. (4) The use, maintenance and maintenance methods of products need to be demonstrated.

2. Pull strategy, indirect way, through advertising and publicity and other measures to attract final consumers, so that consumers are interested in the products or services of enterprises, thus causing demand and taking the initiative to buy goods. Its action route is that enterprises lead consumers to retailers, retailers to wholesalers, and wholesalers to production enterprises. This strategy is applicable to: (1) The market is vast, and most products are convenience products. (2) Commodity information must be informed to consumers as soon as possible. (3) The initial demand of products has shown a good trend, and the market demand is on the rise. (4) The product has unique performance and is obviously different from other products. (5) products that can arouse some special feelings of consumers. (6) Have sufficient advertising funds.