How to use a bronzing machine

Hot stamping process is a special printing process without ink. The so-called bronzing refers to the process of stamping the electrochemical aluminum foil to the surface of the substrate at a certain temperature and pressure, and the bronzing machine is the equipment to complete the bronzing process. Then how do you use a bronzing machine? Let's take a look at the operating rules of the bronzing machine! Operating instructions of bronzing machine How to use bronzing machine Operating instructions of bronzing machine

Operating instructions of bronzing machine

How to use a bronzing machine

1, turn on the power supply, and start idling and parking tests.

2, hot stamping plate, heat finishing hot stamping paper, school board and adjust the spacing of parts to be hot.

3. The first piece can be processed only after it is confirmed by the department head.

4. After completion, start the machine and clean up the surrounding garbage.

Bronzing process

Because the quality, specification and model of electrochemical aluminum foil will affect the quality of hot stamping, scientific and reasonable selection of electrochemical aluminum foil is the premise to improve the quality of stamping process.

process flow

Hot stamping preparation → plate mounting → pad setting → determination of hot stamping process parameters → trial hot stamping → sample signing → formal hot stamping.

Operating rules of bronzing machine

1. The person in charge of the bronzing machine is responsible for supervising the safety of all the staff of the bronzing machine.

2. Before operating the bronzing machine, the operator must dress the work clothes and work shoes neatly, fasten the skirts and cuffs, and do not wear sundries that are easy to fall out of the pocket. Don't put tools, coins, pens, mobile phones, lighters and other items in your pocket, and don't hang keys, BP machines and other items around your waist to prevent them from falling into the machine.

3. Before the bronzing machine is started, the required lubricating oil (grease) should be added to the oil injection point, lubricating point and oil tank of the bronzing machine.

4. Without approval, the crew of this bronzing machine shall not start and operate the bronzing machine without authorization. Assistants and apprentices should work under the guidance of the captain of the bronzing machine.

5. Before starting the bronzing machine, check whether there are sundries in various parts of the fuselage. You must give a signal first, and give an echo before starting the bronzing machine.

6. Before the bronzing machine runs, ensure that irrelevant personnel are near the bronzing machine.

7. The bronzing machine must check whether there is any foreign body before each version, so as to ensure that the bronzing screws are fastened. Push the plate gently to avoid damaging the bronzing machine. During the operation of the bronzing machine, it is forbidden to touch the moving working surface with your hands, repair and wipe the machine, and do not cross the rotating parts. Keep the protection device of the bronzing machine intact.

8, the crew should strictly abide by their posts according to the division of labor, always pay attention to the operation of the various parts of the stamping machine, found that the problem immediately stop processing, be sure to turn off the main power switch when stopping for a long time.

9, the workplace should be kept clean and flat, the ground, workbench, bronzing machine around without sundry, maintenance tools, spare parts should be placed in the designated location.

10. Attention to the bronzing machine: When the first (last) sheet is bronzed, the machine will stop alarming, start to manually increase (decrease) the pressure, and then continue to run. Operators should pay attention to safety when parking.

1 1. When working, no one is allowed to laugh, play or make a loud noise around the bronzing machine.

12. After the work, turn off the power supply of the bronzing machine to ensure that the waste paper around the bronzing machine is cleaned up and there are no sundries on the machine.

13, the bronzing machine should be maintained regularly.