Common energy-saving measures in property management

Common energy-saving measures in property management

Energy conservation refers to the effective use of energy by means of technically reliable, economically feasible, reasonable and environmentally and socially acceptable methods to improve the energy utilization efficiency of energy-using equipment or technology. Let me share with you some common energy-saving measures in property management. Welcome to read and browse.

1, public lighting system? Energy saving?

Main measures and means:

(1) public * * * lighting lamps adopt energy-saving lamps;

(2) The public lighting switch in the building adopts controllable lighting switch, which can be turned on as required;

(three) the public places of entertainment, according to the number of entertainment supervision and switching responsibility mode;

(4) The lighting of parking lots and garages should be turned on and off at different times;

(5) The lighting of public facilities and equipment rooms should be controlled according to the working conditions of personnel. Turn on more lights during maintenance, and turn on less or no lights at ordinary times.

2. Power distribution equipment? Energy saving?

(1) Low transformer loss. According to different seasons, adjust the external environment temperature of transformer (indoor dry-type transformer), and reduce the external temperature manually in summer. (The external temperature is too high and the loss is too large);

(2) Adjust the balance of three-phase load to reduce the loss of transformer and line;

(3) Adjust the compensation capacity of the capacitor, improve the quality of electricity consumption, and obtain the electricity fee compensation.

3. Three-phase AC motor frequency conversion? Energy saving?

(1) frequency conversion of secondary water supply motor saves energy (for directly pressurized secondary water supply). According to the water consumption, water pressure frequency conversion is adopted to save energy;

(2) Elevator frequency conversion saves energy. According to the number of passengers in the elevator, the traction sensor is installed to adjust the frequency of the elevator traction motor to save electricity.

4. Secondary water supply system? Energy saving?

(1) Always check the switches, gates and automatic water level control of the reservoir and roof water tank to prevent water leakage due to failure;

(2) Check and maintain the water supply pipe network in time to prevent problems in the water supply pipe network, water leakage and waste;

(3) Strengthen the maintenance of the main valve of the main water supply pipe network to prevent the branch water supply pipe network from being shut down in time due to problems, resulting in waste.

Note: The water supply system is different from the power supply system. Once there is a local problem, the water supply system will not stop supplying. In addition, once the problem is fixed, the waste will be irreparable. Therefore, daily inspection and maintenance are particularly important for water supply and energy saving.

5. Quantitative management of hydropower measuring instruments

Most residents in Haikou use water and electricity by the property company, which brings certain risks to the operation of the property company. Therefore, it is necessary to do a good job in hydropower balance calculation. Regularly check the total table and sub-table data, so as to measure, analyze and balance first, and reflect the water and electricity consumption in a timely and effective way by comparison. Through the quantitative management of hydropower, problems can be found quickly and dealt with in time to avoid the risk of hydropower loss.

;