What bricks are used to decorate the walls?

Red brick, also called clay brick, is mainly made of clay, shale and coal gangue. Then crushed, mixed and kneaded, manually or mechanically pressed and shaped, dried and fired with an oxidizing flame at a temperature of about 900 degrees Celsius.

2. Lightweight bricks

Lightweight bricks are mainly used as non-bearing walls of building partitions, and their main features are light weight, high strength, water resistance and impermeability. It has been strongly supported by the national wall reform policy and widely recognized by the market for many years, and now it has become an important part of new building materials.

Must the property agree to decorate and tear down the wall?

1. According to the Regulations on Property Management, the owner should inform the property in advance when decorating the house, and the demolition of the wall is of course included in the notice. The reason why there is such a regulation is that the owner is not a professional decorator, so there may be cases where he doesn't know which wall is a load-bearing wall. If the load-bearing wall is removed rashly, it will damage the house.

2. The function of the property is to safeguard the rights and interests of the owners and some trivial matters in the community, so the property has the right to ask the owners to obtain the consent of the property before tearing down the wall. This is not only to ensure the safety of the decoration owners, but also to ensure the safety of the owners of the whole community, so it is reasonable.

Do I need to apply for renovation and wall demolition?

1. According to the relevant national regulations, the owner needs to apply to the property in advance if there is any project that needs to be demolished during the decoration. After the property audit, it is confirmed that the wall to be demolished by the owner can be demolished, and it is approved. If the wall to be demolished cannot be demolished, it will not be approved by the owner.

2. The reason for this provision is that in many cases, the owners tear down the walls without authorization, causing damage to the house and the whole house, which is unfavorable to the property and the owners. There is a hard and fast rule that if the owner demolishes the wall without applying, all losses will be borne by the owner himself.

There are many walls in the house, among which the load-bearing walls and beams cannot be removed. So how to judge whether the wall is a load-bearing wall? In fact, it can be seen from the floor plan of the house that the load-bearing wall will be painted black, and there is another way. You can measure the thickness of the wall. Anything higher than 24 cm is a load-bearing wall.

What should I pay attention to when building walls for interior decoration?

1. The word "I" is used to build walls, not bricks.

No matter big brick and big brick, small brick and small brick, big brick and small brick must take this road to be firm;

2. At the junction of the old and new walls, the old wall will be irregular, and the bricks of the new wall will be "eaten" into the old wall ~

But if you have to build a wall after the fight, it won't work.

There should be serrated openings at the junction of the new and old walls, so that the new and old walls can "eat and live" each other.

And building the thinnest side of the brick;

3. The top of the sealing wall must be a 45-degree brick oblique sealing wall.

Generally, sealed risers have suspended ceilings, so it is not necessary to seal them to the top. There must be a beam at the door.