What are the difficulties and problems in the operation mechanism of fire control work, and what corresponding measures should be taken?

The main problem existing in urban fire protection is that people's awareness of fire safety is insufficient. First of all, let's take a look at a project from design to construction to its use and maintenance.

First, a qualified fire engineering drawing is carefully designed by the design institute in accordance with the national fire protection law. After the design is completed, it will first be submitted to a qualified drawing review company for review. After the audit, it shall be put on record in the relevant fire control unit, and the construction can only be started after obtaining the qualified opinions of fire control construction audit.

Second, after the project starts, the project owner will invite tenders for the fire protection project and supervision company, so that experienced and powerful fire protection companies and supervision companies can complete the construction tasks of this project. In the process of construction, the fire company and the supervision company will earnestly perform their duties, so that the fire control project can be successfully completed.

3. Before the acceptance of the fire fighting project, the fire fighting company and the professional team conducted a comprehensive debugging. The system has been debugged normally, and after a period of normal operation, the fire company will find a company with the qualification of fire control facilities for testing, and the test report will be submitted to the relevant fire control unit for acceptance.

Four, the above work is interlocking, and it is impossible to hand over unqualified fire protection products to the owner. The problem now is that the fire roundabout and fire exits are seriously occupied or even blocked, and half of the fire facilities are not activated. For example, the fire hydrant system and automatic sprinkler system have no water, and the automatic fire alarm system does not supply power. These are the most common violations. The most important reason is that the property company has no full-time fire administrator and no strict fire control system.

5. Personally, I think that as long as the fire protection project is qualified, it must be well maintained, trained full-time fire commissioners and established a perfect fire protection maintenance system. Maintenance should be divided into the following points:

1. Establish fire control management rules and regulations, such as responsibilities of fire control personnel on duty, management system of fire control room, and maintenance management system of fire control facilities.

2, fire control facilities testing instruments and maintenance tools in place. Maintenance personnel wear certificates to work.

3. Maintenance of automatic fire alarm system

4, automatic sprinkler system maintenance

5, fire hydrant fire extinguishing system maintenance

6, fire linkage system maintenance

7, fire partition maintenance

8, smoke control system maintenance

9, emergency lighting evacuation instructions maintenance

10, gas fire extinguishing system maintenance