Job Recruitment Website - Property management - 5 simple personal maintenance contract templates

Simple Personal Maintenance Contract Template 1

Acceptance number:

Supplier:

Demand side:

Signing place:

Signature

5 simple personal maintenance contract templates

Simple Personal Maintenance Contract Template 1

Acceptance number:

Supplier:

Demand side:

Signing place:

Signature

5 simple personal maintenance contract templates

Simple Personal Maintenance Contract Template 1

Acceptance number:

Supplier:

Demand side:

Signing place:

Signature time:

1. The supplier and the buyer sign this contract on the principle of equality, mutual benefit and consensus, so that * * * can abide by it together.

Two. Product Name _ _ _ _ Specification Model _ _ _ Product Serial Number _ _ _ Failure Reason _ _ _ _ Treatment Method _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Total amount of RMB (in words): _ _ _ _ _ _.

Three. Mode and location of maintenance: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Four. Delivery method and location of the repaired equipment: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

5. After the buyer pays according to this contract, the seller shall carry out maintenance and repair within _ _ _ _ _ _ days, and deliver (deliver) the goods in the manner specified in Article 4.

After the maintenance of the equipment, the supplier shall provide a three-month warranty for the same fault of the equipment.

7. During the execution of the contract, if it cannot be performed or needs to be modified for some reason, it shall be valid only after both parties agree and sign another contract.

Eight. Liability for breach of contract: it shall be implemented in accordance with the Contract Law of People's Republic of China (PRC) and other relevant regulations.

Nine. Ways to resolve contract disputes: Any disputes arising during the execution of this contract shall be settled by both parties through consultation. If negotiation fails, it shall be submitted to the Arbitration Commission for arbitration.

X. If there are matters not covered in the above clauses, they shall be supplemented in written form, and _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

XI。 There are _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Twelve. Other agreed matters: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Name of supplier's unit (seal) Name of buyer's unit (seal)

Company address: Company address:

Supplier's Representative: Buyer's Representative:

Telephone fax: Telephone fax:

Bank of deposit: Bank of deposit:

Account number: Account number:

Tax registration number: tax registration number:

Simple Personal Maintenance Contract Template 2

Party A: (hereinafter referred to as Party A)

Party B: (hereinafter referred to as Party B)

Because Party A needs to carry out routine sporadic maintenance work. Party B shall be responsible for sporadic maintenance. The sporadic maintenance equipment is contracted equipment, and all materials are provided by Party B. Through negotiation, both parties reach the following agreement:

I. Equipment contents and requirements:

1. The normal school order shall not be affected during office hours. At the same time, safety precautions should be taken, and other facilities should not be affected during construction. In case of damage, Party B shall be responsible for compensation and repair;

2. In the work, the construction must be carried out in accordance with relevant specifications, and the laws and regulations of Party A must be observed;

3. Party B must strictly take corresponding technical measures in the construction process;

4. Party B must be serious and responsible in the construction process, and cannot endanger the original facilities. In case of any damage, all responsibilities shall be borne by Party B, and Party A reserves the right to further investigate the legal responsibilities of Party B;

5. When working high above the ground, Party B shall independently do safety precautions and personal safety work. All safety responsibilities shall be borne by Party B, and Party A is not responsible.

2. Equipment fee: the actual settlement fee is _ _ _ _ _ (in figures: _ _ _ _ _ yuan) (see the acceptance sheet for specific fees).

3. Payment method: payment shall be made within one month after equipment acceptance.

4. Shelf life: one year from the date of completion acceptance. (The equipment maintenance was completed on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5. Party B shall, according to the relevant national and local codes and regulations, do a good job in the safety precautions for on-site construction and strictly abide by the safety operation procedures. All kinds of accidents in the construction process shall be borne by Party B, and Party A shall not be held responsible. All construction tools shall be provided by Party B. ..

6. This contract is made in duplicate, one for each party, and shall come into effect after being signed and sealed by both parties.

Party A: (signature and seal)

Representative of Party A:

Party B:

ID number:

Account number:

20____ _ _ _ _ _ _ _ _ _ _ _ _

Simple Personal Maintenance Contract Template 3

Party A:

Party B:

According to the Contract Law of People's Republic of China (PRC) and other relevant laws and regulations, Party A and Party B, on the basis of equality, voluntariness and consensus, reach the following agreement on Party B's maintenance of air conditioners from Party A:

1. Party B is responsible for repairing _ _ _ _ air conditioners (hanging up) in Party A's office.

Two. The maintenance contents of Party B are:

1, clean the air conditioner;

2, adding refrigeration additives;

3. Configure _ _ _ _ air conditioning remote controllers;

4. Other maintenance contents to ensure the normal operation of the air conditioner.

Three. Party B promises to deliver all repaired air conditioners to Party A before _ _ _ _ _ _ _ _ _ _.

4. Party B must ensure that the air conditioner is intact after disassembly, bear the responsibility of stolen air conditioner during maintenance, and ensure that it is installed and fixed after maintenance.

5. Without the consent of Party A, the maintenance work shall not be subcontracted to a third party without authorization, and the air-conditioning components that do not need to be replaced shall not be replaced without authorization. If replacement is really necessary, Party A shall be informed, and the replaced parts shall be consistent with the original parts or match the functional performance of the whole machine.

6. After the air conditioner maintenance is qualified, Party A shall pay the air conditioner maintenance fee to Party B in one lump sum. The expenses are calculated according to the contents of Party B's maintenance work (including tax). Among them: air conditioning cleaning and maintenance and adding refrigerant 120 yuan/unit; 30 yuan/Taiwan equipped with universal air conditioner remote control.

Seven. In case of any dispute during the performance of this contract, both parties shall settle it through consultation; If negotiation fails, either party may bring a lawsuit to the people's court.

Eight. For matters not covered in this contract, both parties shall make supplementary provisions after consultation, and the supplementary provisions shall have the same legal effect as these provisions.

Nine. This contract is made in duplicate, one for each party, and shall come into effect as of the date of signature and seal by both parties.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Simple Personal Maintenance Contract Template 4

Party A:

Party B:

According to the Contract Law of People's Republic of China (PRC) and relevant laws and regulations, both parties to the contract reach an agreement on the pipeline maintenance project through consultation on the basis of voluntariness and equality, and sign this contract.

1. Project name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Project name

Two. Project location: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

3. Contracting method: Party B contracts the project and materials.

4. Project contract cost: the tentative cost is RMB _ _ _ _ _ _ _ _ _ _.

Verb (abbreviation of verb) construction period: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. The construction period is _ _ _ _ days; For each day of delay, the construction unit has the right to deduct the project payment of the construction unit according to _ _ _ _ of the total contract price. If the construction period cannot be completed on schedule due to special circumstances, the construction unit shall submit a written notice to the construction unit, and the two parties shall negotiate an appropriate extension.

Six, project quality and acceptance:

The construction unit shall, according to the requirements of the relevant technical data provided by the construction unit, carry out the construction in strict accordance with the relevant technical specifications and standards promulgated by the state and the plans approved by the relevant departments to ensure the construction quality. During the construction period, the construction unit shall appoint on-site supervisors to supervise the construction quality, and negotiate with the construction unit to solve the problems in the construction process and the quality acceptance visa of concealed works. After the project is completed, full-time inspectors from the quality inspection department are invited to participate in the acceptance together with Party A and Party B, and Party B is required to provide inspection reports, certificates and other relevant certificates of materials used in this project during the acceptance.

Seven. Responsibilities of both parties:

Party A:

1. Ensure the construction conditions of "three links" (water, electricity and roads). Provide relevant drawings and technical data, and send on-site supervisors to supervise the project quality progress.

2. Have the responsibility to supervise the transfer of all project funds to the account designated by the construction unit.

3. Handle all supervision and construction procedures except the quality and technical supervision department.

Party B:

1, inspect and supervise the safety of the construction environment, and take timely measures to correct potential safety hazards.

2. Party B's technicians should hold relevant certificates, study drawings carefully, arrange construction progress, ensure quality and safety, fill in construction records every day, clean up the garbage on site every day, and thoroughly clean up the site sanitation before completion.

3. In case of special circumstances, explain the situation to Party A in time to avoid unnecessary losses.

4. Ensure the construction safety of the construction site, and all safety accidents during the construction period shall be borne by Party B. ..

8. Quality warranty: the warranty period is two years. During the warranty period, if the components (including equipment and pipelines) repaired, modified or installed by Party B have problems in operation (causing direct economic losses), Party B shall compensate Party A for all losses caused thereby. ) Party B shall repair, replace (or install separately) for free. The accident caused by improper operation shall be borne by Party A..

Nine. Liability for breach of contract:

This contract shall come into effect after being sealed and signed by both parties. Shall not unilaterally breach or terminate the contract; In case of unilateral breach or cancellation, 15% of the total contract cost shall be used as liquidated damages to compensate the other party.

X. Ways to settle contract disputes: In case of disputes arising from the performance of this contract, both parties shall settle them through consultation; If negotiation fails, both parties agree to submit it to Yan 'an Arbitration Commission for arbitration.

XI。 The original of this contract is in triplicate, with each party holding one copy.

Party A (signature and seal):

Owners Committee (signature and seal):

The Housing Authority signed:

Party B (signature and seal):

Date of signature: _ _ _ _ _ _ _ _ _ _ _ _ _

Simple Personal Maintenance Contract Template 5

Party A: (hereinafter referred to as Party A)

Party B: (hereinafter referred to as Party B)

In accordance with the Contract Law of People's Republic of China (PRC), Regulations on Quality Management of Construction Projects and other relevant laws and administrative regulations, and following the principles of equality, voluntariness, fairness, honesty and credibility, both parties reached an agreement on house maintenance and concluded this contract.

I. Overview of the Project

1. Project name: _ _ _ _ _ _ _ _ _ _ _ _ _ _.

2. Project location: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

3. Project scope: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

4. Contract term: the commencement date is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Second, the engineering service form

Contract work, contract materials, contract term and contract quality.

Third, the settlement method

Party A, Party B and the supervisor will sign the parts and quantity to be repaired in the form of technical contact sheet, and the quantity shall be subject to the contents of the technical contact sheet signed by Party A, Party B and the supervisor to determine the total project cost.

Party A and Party B attach a technical contact list of quantities signed and sealed by settlement book, Party A, Party B and the supervisor as an annex to the contract.

Fourth, the total project price

It is tentatively set at RMB 10,000 (subject to the final settlement amount confirmed by both parties).

V. Supervision, Inspection and Acceptance of Project Quality

Party B shall carry out the construction in strict accordance with national, industry standards, enterprise norms and this contract, and accept the inspection of Party A at any time to provide convenient conditions for inspection and inspection. Party B shall promptly correct the problems raised by Party A.. After the maintenance project is completed, Party A and Party B and the owner of the house to be repaired shall jointly accept the project. Acceptance shall be subject to the construction record signed by the three parties. When the project is completed and accepted, Party B shall be responsible for continuing the maintenance according to Party A's requirements and bear the responsibility for overdue.

Six, the project payment

After the project is completed and accepted, 97% of the total project amount will be paid, and the remaining 3% will be used as quality deposit. After the expiration of the warranty period, Party B shall pay in full without any quality problems.

Seven. guarantee

1. After Party B's maintenance projects are completed, Party B shall undertake the warranty responsibility for all projects. The warranty period is _ _ _ years, counting from the date of project completion acceptance and delivery to Party A. ..

2. The project warranty payment is 10% of the project payment. Within ten days after the expiration of the warranty period, Party A will refund the remaining warranty payment without interest.

3. During the warranty period, if there is any quality problem in the maintenance project, Party B shall guarantee to send someone to inspect and repair it within 2 hours after receiving Party A's notice, and carry out the maintenance within a reasonable period determined by Party A. If Party B fails to send someone to repair it within the time limit or the problem still occurs after the second maintenance, Party A has the right to entrust others to repair it, and all expenses and losses arising therefrom shall be borne by Party B. ..

4. In the process of construction, Party B must operate in strict accordance with the requirements of construction technology. If the repaired project has mildew and leakage again, Party B shall complete the repair within two days after receiving the notice from Party A, and bear all the impacts and economic compensation consequences caused by the recurrence of mildew and leakage. Such as home decoration, compensation for loss of goods, etc.

5. During the warranty period, Party B shall pay a regular return visit to the construction project, make a record of the return visit, and solve the quality problems with hidden dangers in time. Party B now keeps the written address and telephone number of the person in charge of warranty so as to inform Party B to carry out maintenance.

Eight. responsibility for breach of contract

65438+

2. If Party B stops work for more than two days (including two days) without Party A's permission, Party A has the right to terminate the contract, and Party B shall leave unconditionally within two days, and both parties shall settle accounts after Party B leaves.

3. If Party B violates any other obligations under this contract and is notified by Party A to make corrections within a time limit, Party A has the right to terminate this contract, and Party B shall bear all losses caused thereby.

4. Party A or the owner has the right to claim compensation from Party B within two years from the date of knowing the quality problems caused by Party B's intentional or negligent failure to meet the technical specifications and environmental protection requirements or inconsistent with the contract, regardless of whether the project has passed the acceptance, delivery and exceeded the warranty period.

5. Without the written consent of Party A, Party B shall not transfer the rights and obligations under this contract to others, otherwise, Party A has the right to terminate this contract.

6. Before the engineering quality problems of the parts repaired by Party B are solved, Party A has the right to refuse to pay any money.

7. If the contract is terminated due to Party B's reasons, Party B shall bear the penalty of 65,438+00% of the provisional contract price. If the liquidated damages are insufficient to make up for the losses of Party A (including the compensation and liquidated damages paid by Party A to the third party), Party B shall also compensate the losses of Party A.. ..

Nine, safety construction

Party B shall take strict construction safety measures in accordance with relevant regulations, and bear the responsibility for accidents caused by its own ineffective safety measures and the expenses and consequences arising therefrom. Party B shall be responsible for the personal safety of its construction personnel. Party B shall purchase personal accident insurance and all insurance related to the project construction for the construction personnel. In case of safety accidents or other accidents during construction, Party B shall bear the responsibilities.

X. Construction responsibility

1. Party A shall provide Party B with water, electricity and other conveniences during the construction period, and be responsible for coordinating with residents and subordinate departments. Party B shall carry out the construction according to the requirements of construction technology.

2. During the construction period, Party B shall protect the square brick footpaths, flowers and trees in the residential area from damage. When maintaining tenants' houses, we must strictly abide by the property rules and regulations. If the tenant complains or Party B damages the goods, Party A has the right to deduct it from the project payment payable to Party B. ..

3. Party B shall be appointed as the site representative of this project, organize the construction according to the requirements of this contract, and complete the contents stipulated in this contract on time with good quality and quantity. And be responsible for communication and contact with Party A. Any promise, guarantee, letter, signature and confirmation made by the person in charge to Party A on this project shall be regarded as the behavior of Party B, and Party B shall bear the responsibility.

4. Party B shall carry out the construction in strict accordance with the construction specifications and quality standards confirmed by Party A, and make records of various quality inspections. Strictly implement construction specifications, safety operation procedures, fire safety regulations and environmental protection regulations to ensure that the project meets the requirements of the contract and Party A..

5. Before the project is completed and accepted, Party B shall be responsible for protecting all the facilities, finished products and semi-finished products on site and bear the expenses.

6. During the maintenance period, Party B must concentrate the garbage in the place designated by Party A every day, keep the construction site clean and remove it within the time required by Party A, otherwise Party A has the right to entrust others to clean it up, and the expenses incurred shall be deducted from the project payment payable by Party A to Party B. ..

7. Accept the quality inspection, inspection and supervision of Party A's representative and its appointed personnel at any time during the construction process, provide convenient conditions for inspection, inspection and supervision, rework and modify according to the requirements of Party A's representative and its appointed personnel, and bear the cost of rework and modification caused by its own reasons.

8. All the examination and approval procedures required for maintenance and construction (referring to the projects that need to be submitted for approval according to relevant laws and regulations) shall be handled by Party B, and all the responsibilities shall be borne by Party B. ..

9. The maintenance works agreed in this contract must be completed by Party B. Without Party A's consent, Party B shall not subcontract or hand over the works to any other third party, otherwise, Party A has the right to terminate this contract.

10. Party B shall keep good communication with the maintenance owner during the maintenance to avoid disputes. If there is a dispute with the maintenance owner due to Party B, which causes losses to Party A, Party B shall bear the responsibility, and Party A shall have the right to deduct it from the project payment payable to Party B, and Party A shall have the right to recover the insufficient amount from Party B. ..

1 1. During the maintenance and construction, Party B shall take good care of the property and articles of Party A and the owner, and shall not damage the buildings and related facilities and equipment in the community. In the maintenance project, Party B shall compensate Party A or a third party for personal or property losses caused by Party B. Party A has the right to deduct from the project payment payable to Party B, and Party A, the owner or relevant obligee has the right to recover the insufficient part from Party B. ..

XI。 others

1. If this project involves the confirmation of project price, the relevant confirmation shall be confirmed by Party A's representative and Party A's budget department and stamped with Party A's official seal. Other people (except the legal representative) sign or lack any of the above confirmations, or fail to affix Party A's official seal (such as visa stamp), Party A will not recognize it.

2. If the confirmation of engineering quantity is involved, it must be countersigned by the representative of Party A and the project manager * * * and stamped with the special visa seal of Party A, both of which are indispensable.

3. The technical contact list of quantities signed by settlement book, Party A, Party B and the supervisor as an annex to this contract has the same legal effect as this contract.

4. This contract is made in sextuplicate, with Party A holding four copies and Party B holding two copies. This contract shall come into effect as of the date of signature and seal by both parties.

5. Matters not covered in this contract or disputes arising from the execution of this contract shall be settled by both parties through friendly negotiation. If negotiation fails, it shall be settled by the people's court where the maintenance project is located.

Party A: Party B:

Legal representative:

Handler: Handler:

Date: Date:

Simple Personal Maintenance Contract Template 5 Related Articles:

★ 5 copies of simple contract agreement for unit maintenance.

★ 3 The model article of simple maintenance service contract is the latest.

★ Simple model of equipment maintenance contract

★ renovation contract Model of Simple Personal Housing

★ Model simple houses Maintenance Agreement

★ 5 New version of vehicle maintenance contract agreement.

★ Simple model of automobile maintenance contract

★ Simple version of automobile maintenance contract template

★ prototype repair contract agreement

★ Three simple personal mechanical equipment sales contract templates