What about the living room stairs?

There are two situations before the installation of indoor stairs: one is that the developer has provided the stair structure with cement foundation, and the other is that there is no foundation. Before installation, you need to go to the market to choose your favorite stairs.

For cement-based stairs, someone will knock them down and reinstall them, but you must communicate with the property before knocking down the infrastructure. Generally, the stairs of duplex houses and apartments can be demolished and rebuilt, while the stairs of single-family and split-level houses cannot be demolished and rebuilt at will. Therefore, when dismantling the original building components, we should first communicate with the property department and listen to their opinions before making a decision. The installation of finished stairs is relatively simple.

Choose a style

For the stairs with original infrastructure, consumers can choose various decoration materials according to their preferences, mainly solid wood and stone. In solid wood staircase, rosewood, beech and oak are mainly used. However, wooden stairs are easy to crack, difficult to maintain and the most expensive, so it is necessary to leave some deformation gaps when installing. The stone steps are mainly marble, and the handrails are carved with stone, which is cheaper than solid wood, but heavier.

The material and structure of finished stairs are changeable, including metal, glass, wood, wood steel and so on. And the styles are changeable, occupying little space. The smallest spiral staircase only occupies a space with a diameter of 1.2 meters.

3 measurement and design

Before preparing to install the stairs, the decoration designer should make a door-to-door survey, collect all the data at the entrance of the stairs, and then design a scheme according to the overall indoor style and the owner's preference, and then hand it over to the decoration team for operation.

For the decoration of finished stairs without infrastructure, the finished stairs can generally be customized according to the requirements of consumers. When consumers choose stairs, they should consider the style, material and slope in advance. And it's best to have designers from stair manufacturers and designers from decoration companies communicate on the spot. After the designer of the decoration company makes a plane rendering, the stair manufacturer will make it according to the requirements, and the manufacturer usually has a production cycle of about one month.

concrete construction

Finished stairs can be customized according to your own situation.

Today's finished stairs are very convenient, just like a piece of furniture. After customization, it can be installed directly.

The installation of finished stairs is generally divided into three times. The first installation is to embed the main reinforcement and ground anchor before the ground decoration, and treat and strengthen the foundation. The second installation is the previous cleaning. Install the pedal and adopt the guard cover to facilitate customers to carry large pieces of furniture. The third installation is completed before check-in. Pay attention to whether the installed stairs have damaged the wall surface during acceptance. After installation, the general manufacturers should provide after-sales service cards, product certificates and instructions for use, and many manufacturers will also give supporting tools to facilitate their daily use in the future.

Therefore, there are many places to pay attention to when purchasing finished stairs. First of all, we should pay attention to the slope of the stairs, which is generally 20 degrees to 45 degrees, and 30 degrees is appropriate.

Height between steps 15CM, pedal width 30CM, length 90CM. The railing height should be kept at 1m, and the railing spacing should not be greater than 15CM. Good quality stairs can bear up to 400kg per level.

Note: The stair tread height is generally between 18cm-23cm. Too high or too low will bring inconvenience in use. First of all, the glass pedal should be tempered glass, and it must be anti-slip. Its light transmittance and smoothness are good, and the thickness is preferably 10mm+ 10mm laminated glass. When the surface is impacted, the lower layer can also be safely motionless, which increases the safety factor. Stairs with existing foundations are best not to be demolished and rebuilt.

Although the developer has provided the basic structure of the stairs, the transformation is not impossible. You can also choose your favorite decoration materials and decorate your favorite style on the original structure. For the stairs with reinforced concrete structure, it is best not to dismantle and rebuild them, because the stairs with this structure are the most stable and have little noise when walking, which is very suitable for family use.