Electric power agreement

Model power agreement (selected 10 articles)

In today's social life, we are all directly or indirectly related to the agreement, and signing the agreement can solve or prevent unnecessary disputes. So do you really know how to write a good agreement? The following is a sample of the electricity agreement I have compiled for you. Welcome to share.

Power Agreement 1 Party A:

Party B:

In order to ensure the smooth progress of the project construction and safe power supply, Party A and Party B have reached the following agreement on Party B's construction electricity consumption:

1. Party B works at Party A's site, and Party A is responsible for power supply. Party B puts forward the electricity load in advance, which is confirmed by Party A, and completes the laying of power lines and the installation of power supply facilities. After Party A's acceptance, Party A will send electricity. ..

2. Party B must design, install and use power facilities in accordance with the relevant national power standards and regulations, and strictly manage and strengthen safety supervision to ensure the safety of electricity use. (The switchboard must be equipped with qualified leakage protectors; All electrical equipment housings must be well grounded, and circuit breakers and switch arc extinguishing devices must be complete and intact; It is forbidden to replace fuses with copper wires, iron wires and aluminum wires; Cable insulation must be good). During Party B's stay at the site, Party B shall bear all the responsibilities for the safety accidents caused by electricity consumption.

3. Party A shall ensure normal power supply, notify Party B 24 hours in advance in case of normal maintenance and power failure, and notify Party B in time in case of unexpected power failure, so that Party B can make good work arrangements. In case of power failure due to Party B's own reasons, Party B shall notify Party A in writing, and Party A shall make arrangements.

4. Party B must bear the electricity fee and electricity fee according to the provisions of the construction contract, and the electricity meter shall be subject to the electricity meter confirmed by both parties. For equipment using 220v power supply, a single-phase watt-hour meter must be installed, and the shell of the watt-hour meter must have a complete lead seal. After the power connection is completed, Party A's electrical personnel shall install special lead seals on the feet and ct terminals for measurement. Party B shall not dismantle or replace the lead seal of the electric meter and the ct terminal for measurement at will, and shall not alter or operate the electric meter without permission. Otherwise, 500 yuan will be fined every time it is found, and extra power will be lost. If there are any problems that must be corrected, Party A's electrical technicians must be informed to be present in advance.

5. Party B must use electricity according to the pre-agreed load. If Party A's power supply equipment is damaged due to overload, Party B shall bear all losses. If the power outage scope is large due to Party B's responsibility, which affects the overall progress of the project, Party B shall bear the responsibility. ..

6. Party A has the right to check Party B's electricity consumption, find hidden dangers and problems, and notify Party B to rectify within a time limit. Those who fail to make rectification within the time limit will be fined 200 ~ 1000 yuan each time. If the circumstances are serious, a power outage will be given, which will affect the construction period at your own risk.

Seven. This agreement shall come into effect after being signed by the representatives of Party A and Party B. As an annex to the construction contract, it has the same legal effect as the construction contract.

Eight. This agreement is made in duplicate, one for each party.

Party A:

Party B:

Xx，xx，XX，XX

Chapter II of Power Agreement Party A:

Party B:

Party B uses electricity from Party A for production needs, and through negotiation, Party A and Party B reach the following agreement:

1. Party B borrows Party A's power supply for production, and Party A agrees that Party B will receive electricity in Party A's power distribution room. Unless otherwise agreed by both parties, Party B shall not change its use without authorization. In case of breach of contract, Party A may unilaterally terminate the contract at any time.

2. The term of the loan starts from the date of the month and ends on the date of the month. If Party A needs to expand the production scale or increase the actual electricity consumption, it has the right to notify Party B in writing 7 days in advance, and may terminate this contract at any time.

Three. Party B shall not damage Party A's substation facilities and equipment, change the line or lend it to others for use. During the period of borrowing electricity, Party B shall install an independent electric meter in Party A to connect cables and wires independently. All expenses of cables, wire ammeters and other related equipment and facilities shall be borne by Party B. ..

4. On the day of each month, Party A shall copy Party B's electricity meter and notify Party B, and Party B shall pay the electricity fee to Party A according to the electricity consumption standard of RMB/kWh and related electricity consumption, and the payment date is. In case of overdue payment, Party A shall pay a late fee of 5% of the unpaid amount every day. During the electricity borrowing period, the national electricity price standard is adjusted, and Party A and Party B adjust the electricity borrowing fee standard accordingly.

5. If Party B's overload operation or improper human operation causes damage to the substation equipment, Party B shall bear all responsibilities and compensate Party A for its economic losses.

6. Party A shall notify Party B 3 days in advance when it needs power failure due to maintenance or replacement of substation equipment.

If Party B suffers losses due to force majeure factors other than Party A's subjective intentional power outage, Party A shall not bear any responsibility.

Seven. Party B shall submit a deposit of RMB Yuan only for the use of electricity. After receiving the deposit, Party A will issue a receipt voucher to Party B, and the deposit will be used for deduction when Party B defaults or owes money. When this contract is terminated or dissolved, the remaining deposit will be returned to Party B without interest.

Eight. During the period of power consumption, Party B shall implement the regulations of relevant departments, take full responsibility for comprehensive management responsibility and safety, and obey the supervision and inspection of Party A.. Pay attention to the safety of the wires connected by Party B, assign special personnel to regularly check the potential safety hazards existing in temporary electricity consumption, and pay attention to the safety of electricity consumption. In case of any accident, Party B shall be responsible, not Party A. ..

9. In any of the following circumstances of Party B, Party A may cut off the power supply or unilaterally terminate this contract, and all losses caused to both parties therefrom shall be borne by Party B. ..

(1) Lend it to others for use without authorization;

(2) changing the power use of the transformer without authorization;

(3) The unpaid electricity fee and the expenses that Party B should bear amount to five days;

(4) Damage to transformers and ancillary equipment;

(5) Refusing to perform the obligations stipulated in this contract.

X for matters not covered in this contract, both parties shall sign a supplementary agreement through negotiation, and the supplementary agreement shall have the same legal effect as this contract.

XI。 This contract is made in duplicate, which shall come into effect after being signed and sealed by both parties, and each party holds one copy.

Party A: (Seal)

Party B: (Seal)

Xx，xx，XX，XX

Chapter III of Power Agreement Party A:

Party B:

Through consultation, both parties reached the following agreement:

1. Party A shall provide Party B with water and electricity.

2. Party A shall send a payment notice to Party B after reading the meter every month, and Party B shall pay the water and electricity fee to Party A within () days after receiving the notice. If the overdue period exceeds () days, Party A may suspend the monthly power supply and have the right to terminate the contract.

3. Party A shall not cut off power and water without reason, and compensate Party B for the losses caused by Party A's power and water cuts.

4. Party B shall use electricity and water safely and economically, and shall not damage the water and electricity facilities and compensate for the damage according to the price.

Verb (abbreviation of verb) This agreement is valid from () to ().

Party A:

Party B:

Date:

Article 4 of the power agreement Party A:

Party B:

Party B needs to solve the problem of electricity consumption temporarily due to the construction of XXX external thermal circuit, and hereby temporarily borrows electricity from Party A.. Party A provides Party B with a transformer for Party B's use, and the following agreement is reached through negotiation between the responsible persons of both parties:

The power address is xxxxx.

First, the electricity price. Party B shall pay the electricity fee at the time required by Party A. The payment time is 20xx years x months x days.

2. Party B shall install a special watt-hour meter to accurately measure electricity consumption. It can only be put into use after being confirmed by Party A's technicians.

Three. Safety of electricity consumption: Party B's line should be connected to the switch designated by Party A. When Party B's personnel are present, Party A's personnel should start the machine according to Party B's requirements. Party B's personnel are prohibited from operating Party A's equipment. Party B shall be responsible for the personal safety and equipment safety outside the switch of Party A. ..

4. If Party A's electricity consumption is affected, Party A may temporarily stop supplying power to Party B and notify Party B at the same time.

5. Party B is responsible for the safety of electricity consumption under the metering box.

Six, since the date of signing the agreement.

Seven. This agreement is made in quadruplicate, with each party holding two copies.

Party A:

Party B:

Xx，xx，XX，XX

Chapter V of Power Agreement Party A:

Domicile:

Party B:

Domicile:

According to Party B's construction needs and in order to support the development of telecommunications, both parties reached the following agreement through friendly negotiation:

1. Location of power user base station: Tengfei Digital Plaza, No.23 Hongmen Road, Shashi District

2. Power consumption cycle of base station: 20xx years 1 month 1 day to equipment dismantling.

3. The electricity user shall pay RMB five thousand Yuan only (RMB 5,000 Yuan only) as the equipment electricity fee every year, and the power supplier shall provide the corresponding bill to the electricity user.

Four, electricity safety responsibility

1. The power facilities that belong to the property rights of the power users shall be maintained by the power users, who shall bear all safety responsibilities caused by power consumption;

2. The power supplier must fully guarantee the power consumption, and the power consumer should be equipped with reliable protection devices, which can quickly cut off the power supply in case of failure, and all consequences caused by the failure of the power consumer or the power consumption exceeding the agreed capacity shall be borne by the power consumer;

3. Power users shall not transfer power supply to the outside world, otherwise power users have the right to terminate power supply to power users, and the consequences arising therefrom shall be borne by power users.

This contract is made in duplicate, one for each party, and shall come into effect on 20xx 65438+ 10/month 1 day.

Party A:

Party B:

Xx，xx，XX，XX

Article 6 of the power agreement Party A:

Legal representative:

Domicile:

Party B:

Legal representative:

Domicile:

In order to clarify the rights and obligations of Party A and Party B in electricity consumption and management, and make Party B use electricity safely, reasonably and orderly, the following agreement is reached through consultation between both parties, please strictly abide by and perform it.

First, apply for electricity

Party B shall write an application for electricity utilization (including voltage grade, capacity and electricity utilization address), and the mobile office shall be responsible for arranging professional electricians to carry out docking operations in appropriate places according to the situation after being signed by Party A's office and company leaders.

Second, the responsibility of power facilities maintenance and management

1. The demarcation point of power supply and distribution facilities of Party A and Party B is at the user's electricity meter, that is, Party A is responsible for the operation, maintenance and management of power supply facilities at the demarcation point; The power facilities on the load side of the demarcation point shall be owned by Party B, and Party B shall operate, maintain and manage them by itself.

2. Unless otherwise agreed, the power supply facilities under the responsibility of both parties shall not be operated or changed without the consent of the other party. Party A may replace or operate Party B's power supply equipment according to the actual situation when it endangers the safety of power grid and electricity consumption, or may cause personal injury or equipment damage, or default in electricity consumption, electricity theft or arrears.

3. Party A is responsible for managing, protecting and monitoring the normal operation of the electric energy metering device and the electric load management device installed in Party B's power receiving equipment, and shall notify Party B in time if there is any abnormality.

4. Party A may check Party B's electricity consumption at any time, and Party B shall cooperate.

Three, power supply facilities safety management responsibility

1. Party B shall regularly inspect, repair and test all its electrical equipment, take measures to prevent electric shock, eliminate hidden dangers of equipment in time and prevent electrical equipment accidents.

2. Party B is prohibited from using hook wires, broken wires, underground climbing wires and wires with unqualified insulation to connect electricity.

3. Party B shall not change the operation mode of the low-voltage system without authorization, and shall not use electricity in one place and one line.

4. Party B is forbidden to pick up the broken power cord; When it is found that the safe distance between the wire and the ground is not enough or damaged, no one is allowed to get close to it. Stay away from the dangerous point and damaged point of the wire for 8 meters, protect the site and immediately report to the electrician for treatment; So as not to expand the scope of the accident.

5. If Party B finds that someone is electrocuted, don't pull the electrocuted person with your bare hands, and disconnect the power supply as soon as possible.

6. Party B shall timely prune or cut down trees and bamboos that may endanger the power line corridor.

7. Party B shall install leakage protectors as required; Party B fails to install the leakage protector as required, cancels the installed leakage protector without authorization, and adjusts the setting value of the leakage protector without authorization. Party B shall be responsible for the accidents caused thereby. ..

8. The maintenance of Party B's leakage protector shall be carried out by professionals. If there is any abnormality in the operation, please ask Party A's electrician to handle it.

Four. Agreed matters and liability for breach of contract

1. If Party B fails to perform the maintenance and inspection obligations as agreed, resulting in the operation of electrical equipment with diseases and potential safety hazards, Party A has the right to directly suspend power supply to Party B. ..

2. Party A shall put forward written rectification opinions on the hidden dangers of Party B's electrical equipment; After rectification, Party B shall conduct acceptance in time.

3. Party B shall submit a written application to Party A in advance for temporary electricity use, and the wires, plugs, sockets and switches required for installation of power equipment and temporary electricity use shall be marked with the requirements for safe electricity use; During the period of temporary electricity use, a special person shall be appointed to keep the temporary electricity facilities, and they shall be dismantled in time after use.

4. Party B must bear all legal responsibilities for electric shock accidents caused by unauthorized power connection and illegal power use.

5. If Party B fails to perform this agreement or the management is not in place, causing personal and equipment damage to Party A or the society, Party B must bear all legal responsibilities according to law.

V. Electric Energy Measurement

1. Party B shall install electric energy metering devices as required. The record of electric energy metering device will be used as the basis for Party A to calculate Party B's electric quantity. ..

2. The metering device installed by Party B can only be used after it is verified by the legal metering unit.

3. According to the national metrology laws and regulations, Party B's metering device shall be subject to compulsory periodic verification. Party B shall not refuse for any reason, and Party B shall pay the verification fee.

Six, electricity charges

1. Party A collects the current electricity charge according to the records of the electric energy metering device, and the unit price is 1 yuan/kwh.

2. Party A shall read the meter on the 20th of each month, and charge the electricity fee from 25th of the current month to next month 10. If the user refuses to pay the electricity bill or fails to pay the electricity bill within the time limit, Party A will directly suspend the power supply, and all legal responsibilities and losses arising therefrom shall be borne by Party B, which has nothing to do with Party A. ..

3. If Party B fails to pay the electricity fee to Party A in full and on time, it shall bear the late fee for electricity fee, and the penalty for electricity fee shall be calculated at 2% per day. If Party B refuses to pay the electricity fee and the penalty for electricity fee without justifiable reasons, Party A has the right to suspend power supply and recover the electricity fee and the late fee for electricity fee according to legal procedures.

4, it is forbidden to steal electricity and illegal use of electricity. If Party B steals electricity or uses electricity in violation of regulations, it will be punished by 10 times of the maximum load of the electricity facilities every time.

7. In case of any dispute, both parties shall negotiate amicably. If negotiation fails, either party may bring a lawsuit to the court where Party B is located.

Eight. This agreement shall come into force after being signed and sealed by both parties.

Nine, the original of this agreement in quadruplicate. Each party holds two copies.

Party A: (signature and seal)

Party B: (signature and seal)

Xx，xx，XX，XX

Article 7 of the power agreement Party A:

Party B:

(hereinafter referred to as Party B) In order to strengthen the safety and management of temporary electricity consumption on the construction site, and make the temporary power supply system on the site run in the best state under the rated capacity, various electromechanical protection devices are effectively maintained and maintained, so that they can play their due protective role and prevent all kinds of electricity accidents. In order to clarify their respective responsibilities, rights and obligations, both parties agree to sign the following agreement through consultation:

1. Party A and Party B must conscientiously implement the laws, regulations and rules and regulations concerning safe production of electricity.

2. Party B must obey the power management of Party A.. Before Party B enters the site and puts it into use, it should be checked and accepted with Party A, and it can only be put into use after mutual consent. In the process of use, the equipment breaks down, endangering the system operation; Stop using it immediately and report it to Party A for the record. Before the fault is completely eliminated, power-on trial operation is not allowed.

3. Party A is responsible for providing power to Party B.. When connecting the power supply, it must be connected at the location designated by Party A, and it is not allowed to connect it privately.

4. Party A has the right to check the safety of electricity consumption in the construction area, and issue a written notice of hidden danger (signed by both parties) to Party B for unauthorized power connection, violation of regulations or serious violation of regulations, and make rectification within a time limit. If Party A fails to make rectification within the time limit and delays without justifiable reasons, Party A has the right to stop Party B from using electricity.

5. If Party B has an accident during the construction, all safety responsibilities shall be borne by Party B, which has nothing to do with Party A. ..

6. The electricity consumption shall be subject to the meter, and shall be measured and settled after confirmation by both parties. The electricity price shall be calculated according to the 2 yuan charge per kilowatt hour, and Party B shall pay all the electricity charges to Party A in one lump sum within 15 days after the power supply is terminated.

Seven. This agreement is made in duplicate. Party A and Party B each hold one copy.

Party A:

Party B;

Xx，xx，XX，XX

Article 8 of the power agreement. Lessor: (hereinafter referred to as Party A)

User: (hereinafter referred to as Party B)

In order to clarify the rights and obligations of Party A and Party B in the process of temporary power supply and ensure the safe use of electricity, Party A and Party B signed this contract through consultation and strictly implemented it according to the Electricity Law of People's Republic of China (PRC), the Regulations on Power Supply and Use and the Technical Specifications for the Safety of Temporary Power Use in Construction Sites.

1. Party A will lease the receiving transformer located in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Party B pays a one-time equipment deposit of 30,000 yuan, and the rest is charged according to the rent, which is 4,300 yuan per month (RMB 4,300 yuan), and any part of a month is counted as one month.

2. Party B shall strictly abide by the national regulations on safe electricity use, and shall not change the nature of electricity use without authorization, and shall not use electricity with overload or capacity exceeding, and all consequences shall be borne by Party B. ..

3. The monthly electricity fee shall be paid by Party B according to the charging standard of the electric power department. If Party B fails to pay the electricity fee according to the time stipulated by the local power supply department, it shall bear the economic responsibility and all consequences.

4. Party B shall be responsible for the operation, maintenance and management of the equipment from the date of lease, and shall consciously regulate the electricity consumption to ensure the safety, integrity and reliability of electricity consumption. In the process of using electricity, Party B shall bear all the consequences of equipment damage, personal accidents and other accidental injuries and power supply accidents caused by violating the regulations of the power supply department.

Verb (abbreviation of verb) Both parties check the reading of the electric energy meter and complete the handover, and Party B is responsible for collecting the electricity fee in the future.

6. If Party B seriously violates the regulations on safe use of electricity, discipline and personal safety, and still fails to rectify after being put forward, Party A has the right to stop power supply at any time.

Seven. Matters not covered in this agreement shall be settled by both parties through consultation. If negotiation fails, you can choose arbitration or litigation.

Eight. This agreement is made in duplicate, one for each party, and shall come into force after being signed and sealed by both parties.

Lessor (signature and seal):

User (signature):

Xx，xx，XX，XX

Article 9 of the Power Agreement Party A:

Party B:

Starting from August 18, 20XX, Party B will build the equipment of communication tower base station room on the platform of Party A's South Building. In order to ensure the needs of Party B's communication engineering and the operation of base station equipment, Party B and Party A have reached the following power consumption agreement:

1. The term of power cooperation is three years, which is synchronized with the lease term of the site. The specific cooperation period starts from _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

2. Party A agrees to provide electricity demand of not less than _ _ _ _ kilowatts according to Party B's requirements. ..

3. Party A promises that when Party A has power supply, it shall not interrupt the power supply to Party B without reason, whether it is used by the power department or generated by Party A, so as to ensure the normal work of Party B's communication base station.

4. If the power supply must be interrupted for any reason (such as maintenance), Party A shall notify Party B 24 hours in advance so that Party B can take corresponding measures.

5. Party A agrees to re-lay the three-phase four-wire cable dedicated to Party B from the main distribution box of Party A to the site where Party B uses the installation equipment according to Party B's requirements. All the work and expenses of this part shall be borne by Party B. ..

6. The power consumption of Party B's equipment belongs to general industrial power consumption, and it is actually measured by the electricity meter installed by Party B, and the expenses are borne by Party B ... and paid to Party A in the form of annual advance payment, with the annual advance payment of RMB; Every 12 months, the * * * staff of both parties check each other, and settle the electricity fee according to the actual consumption generated by the electricity meter based on the principle of returning more and making up less, and the electricity price is paid at RMB _ _ _ _ _/kWh. Party A shall first provide a valid charging voucher, and Party B shall pay the electricity fee by bank transfer within 20 working days after receiving the valid charging voucher;

Seven, such as electricity late or not, can consult the contract contact to verify. If Party B fails to pay the electricity fee due, Party A has the right to cut off the electricity, and Party B shall be responsible for the consequences arising therefrom; If Party B pays the electricity fee as agreed in the contract, and Party B cuts off the electricity for no reason, all losses caused thereby shall be borne by Party A; If Party B pays the electricity fee as agreed in the contract, and Party A cuts off the electricity for no reason, Party A shall be responsible for all the losses caused thereby, and both parties shall strictly perform their respective obligations and responsibilities. If one party breaches the contract, it shall compensate the other party for its actual economic losses.

8. This agreement is made in duplicate, which will take effect from now on.

Party A:

Party B:

Xx，xx，XX，XX

Electricity agreement 10 unit name:

Construction team:

In order to ensure the safe use of electricity, Party A and Party B conscientiously implement the relevant national norms and regulations and the safe use management system of their own units, obey the management of the industry and accept the supervision and inspection of relevant units, and both parties sign the following safe use agreement:

1. After Party B enters the site, Party A shall also educate Party B's workers on safe use of electricity.

Second, according to the construction task, Party A shall make a disclosure on the safe use of electricity for Party B's subdivisional works. In the process of construction, Party B must operate according to the safety operation rules and the disclosure of safe electricity consumption, and accept the supervision and inspection of Party A. Party B must equip the electricity users with corresponding labor protection articles and urge them to use them correctly.

3. Party B's electricity users shall not use or connect electrical equipment without authorization, and the relocation and movement of electrical equipment shall be approved by Party A's electrician.

Four, Party B's workers must abide by all the safe electricity management systems and operating procedures of the project department, and shall not command or operate illegally.

Verb (abbreviation of verb) casualty accidents shall be handled in accordance with the safety agreement signed by both parties.

Supplementary agreement of intransitive verbs

This agreement is made in duplicate, one for each party. This agreement shall come into force from the date of signing, expire and terminate after all workers leave.

Signature of Party A:

Signature of Party B:

Xx，xx，XX，XX

;