What should I do if there are cracks in the wall of the new house?

If there are cracks in the wall of the new house, you can refuse to accept the house. If the new house acceptance is a small quality defect, it can be directly reported to the property maintenance or developer for handling. If it is a big quality problem, such as cracks in the wall, the owner can request to refuse to accept the house according to law, and then go through the check-in formalities after all the quality problems are rectified.

Matters needing attention in acceptance of new houses

1, house quality inspection should be cautious. Because the windows of the new house are closed for a long time, there will inevitably be some ash layer and construction waste on the track of the doors and windows. So when we check the doors and windows, don't pull the doors and windows with brute force. Once we feel obstacles, we should examine them carefully. After cleaning up the garbage, carefully check whether there are cracks in doors, windows and balconies, and solve them immediately.

2, metope should level off, no water seepage, no cracks. When checking the wall, carefully check whether there are irregularities, water seepage, cracks and other phenomena in the wall. Especially the top and exterior walls of the kitchen, if any, we should find out the reasons as soon as possible and solve them in time.

3, carefully check whether there is any shell cracking on the ground. Carefully check the ground for hollowing and cracking. When checking, you can knock with a small hammer. If there is one thing, please ask the property manager to repair it as soon as possible, so as not to break through the floor during the decoration process and affect the relationship with neighbors.

4. Whether the water and electricity are unblocked and can be used normally. When checking the water pressure and water flow speed, you can turn the faucet switch to the maximum, and judge whether the water pressure passes according to the size of the water flow and whether the water flow speed is urgent. Test voltage can be measured by multimeter whether the strong and weak currents are smooth or not.

5. Whether the sewage is unobstructed and whether there is water. The owner can fill the two basins with water and pour water into each sewer when accepting the sewage discharge, for example, the two basins drain water into the basin sewer, bathtub sewer, bathroom sewer, kitchen sewer, bathroom sewer and balcony sewer respectively. When pouring water, listen carefully for grunting, and then check whether there is water on the surface, make sure there is no problem, and let these out as soon as possible.

6. Check and accept groundwater. Groundwater is mainly discharged from the toilet. Don't put too much, just increase it by about 50px. Then I made an appointment with the owner downstairs to check the ceiling of their bathroom 24 hours later. When all the water is used up, turn on the water meter and look at the numbers displayed on it. At the same time, write down the numbers on the water meter together with the numbers on the electricity meter.

7. Carefully verify the sales contract. Carefully check the facilities and equipment specified in the sales contract to see if there are any left-behind, different brands and inconsistent quantities. Usually there is no big problem in this respect, but it will be better to check it carefully.

8. Sampling of house inspection data When measuring the space height of the house, you can choose a tape measure with a length of 5 meters. When sampling the source and location of the data and its specific data, it is best to record the numbers on the water meter and ammeter, the height of the building, the pit distance of the toilet, the length and width of the bathtub, the size of the shower room and the height of the ceiling in your notebook. But the data and problems of repossession are written on the paper provided by the property company.