Job Recruitment Website - Property management - How to install the floor heating hot water converter? Can you make it clear? Do you have a picture?

How to install the floor heating hot water converter? Can you make it clear? Do you have a picture?

The heating converter converts tap water into hot water by using the heated heat. There are hot air inlets and outlets at both ends of the heat exchanger cylinder, and tap water is filled in the cylinder. Hot air and hot water heat the tap water in the cylinder through the coil in the cylinder, and there are two water dividing devices at both ends inside, so that tap water is slowly injected into the cylinder of the heat exchanger, cold water and hot water are evenly separated, and hot water is pushed out of the cylinder at the same time, providing hot water for people's lives.

There is no uniform quality standard for such products in China, and there is no safety guarantee for users to install and use them privately, which is easy to cause fever problems and accidents. The heating in the general user's home, if it belongs to central heating, is installed according to the housing area and has a certain load capacity. If the user installs the heating heat exchanger privately, part of the heat of the radiator is used to heat the tap water, and the heat emitted indoors is reduced, which will naturally affect the heating effect. ?

Extended data:

Matters needing attention in using floor heating:

1. When floor heating is used for the first time, it should be heated up gradually three days before heating starts.

2. The water temperature is 18℃ on the first day, 25℃ on the second day, 30℃ on the third day, and it can be raised to normal temperature on the fourth day, that is, the water temperature is 45℃ and the surface temperature is 28℃ ~ 30℃.

3. Because there is no guarantee that cement and other floors do not contain water vapor, in order to avoid floor deformation caused by excessive moisture after heating, the heating of floor heating should be controlled moderately.

4. Floor heating can be divided into two ways: central heating, household metering and self-provided small boiler heating. If it is the owner of central heating, the hot water is provided by outdoor heating station or residential boiler room, and there will be some impurities or rust in the hot water. Over time, these rust will block the pipeline, thus affecting the indoor heating temperature.

5. If the owner feels that the temperature has been affected to some extent, he can contact the property or the floor heating manufacturer for treatment. Generally speaking, there is a filter screen when entering the house, which needs to be taken down and cleaned regularly.

Baidu encyclopedia-geothermal energy conversion

Baidu encyclopedia-water heater