How to install circulating pump for floor heating

The circulating pump of floor heating, that is, the booster pump, is suitable for the situation of insufficient water pressure in the liquid circulation system. If the water pressure of floor heating is insufficient, there will be a problem that the heating is not hot. At this time, it is necessary to install a circulating pump to increase the water pressure of floor heating and promote water circulation. So how to install a circulating pump for floor heating? What problems should be paid attention to when installing circulating pump? Let's have a brief look with Qijia. Com experts.

First, how to install circulating pump for floor heating

Firstly, determine the installation position of the circulating pump and purchase a suitable circulating pump; The booster pump is generally installed in front of the floor heating water inlet pipeline, and the pipeline needs to be cut off with a chainsaw; At this time, the two ports of the cutting pipeline are respectively connected with the two interfaces on the circulating pump and sealed.

Second, what problems should be paid attention to in the installation of circulating pump?

1, pay attention to whether the import and export are smooth.

Before installing the circulating pump, check the position of the water inlet and outlet of the machine to see if there is any blockage. If there are foreign objects, they should be removed to avoid problems such as water flow compensation and floor heating. At the same time, attention should also be paid to the blockage in the floor heating pipeline system, and its impurities need to be washed, otherwise the circulating pump will be easily entangled with impurities during use, resulting in the problem of blocked rotation.

2, pay attention to careful installation

Install the circulating pump to avoid excessive force, which needs to be gentle. Excessive force or violence during installation can easily damage the pump body. At the same time, pay attention to safe wiring. The booster pump is also powered by three plugs, so pay attention to grounding and ensure that the grounding terminal is connected with the motor housing.

3. Pay attention to whether the installation is successful.

After the circulating pump is installed, it needs to be debugged to see whether it is installed smoothly, but before debugging, it needs to see whether its impeller is rotating. Because the noise of the product is low, you can hold the machine with a screwdriver and listen carefully.

Editor's summary: The above is an introduction about how to install circulating pump in floor heating and what problems should be paid attention to when installing circulating pump. I hope what Bian Xiao shared can be a reference for everyone. If you want to know more, you can pay attention to our family. Com information.