What are the precautions for decorating water and electricity? Come on, give directions!

Matters needing attention in water and electricity decoration:

1. Wires should be conventional products, and conduits and cassettes must be flame retardant.

2. On the waterway, water pipes should also be regular and reliable products. No matter what kind of connection method, it must be reliable and carry out pressure test in strict accordance with the standards.

3. For weak video cable, it must be double shielded thick core cable, and telephone line and network cable should not be sloppy.

4. The sewage pipe should be as large as possible, avoiding the right angle direction. The distance from the gas pipe to the cooker and water heater should be as short as possible, preferably no more than 2 meters.

5, waterway design must first think about all water-related equipment, such as: water purifier, water heater, kitchen treasure, toilet and wash basin. Their locations, installation methods and whether hot water is needed; It is necessary to make good use of gas or electric water heaters in advance to avoid temporary replacement of water heaters, which will lead to repeated reconstruction of waterways.

Extended data:

Hydropower decoration skills:

1, water pipe to ceiling

It is suggested that the water pipe should be topped, in case of water leakage and other accidents, it can be seen immediately, the maintenance cost is also very low, and it is convenient to change parts without hitting the wall or the ground. If the water pipe goes underground, once it leaks, it is difficult to find it.

2, high voltage and weak current in charge of color separation laying

In the decoration, strong electricity is what we often call "wires", and the air-conditioning wires of electric lights and sockets are all strong electricity. Weak current refers to telephone lines, network lines, TV lines and audio and video lines. It should be noted that during decoration, strong current and weak current are laid separately with a distance of 30 ~ 50cm to prevent strong electromagnetic fields from interfering with weak current signals.

3, wire box cover processing

Decoration to the mason stage, the site is generally chaotic, it is inevitable that there will be some cement sand. At this time, it is very important to protect the wire box. Add a protective box to protect the wire end from alkali corrosion such as cement.

References:

People's Network-Decoration Knowledge Tips 18 Matters needing attention in hydropower transformation