What are the reasonable suggestions for energy saving and consumption reduction in chemical plants?

1, improve the awareness of energy saving and consumption reduction of all staff, and all factories, departments and teams should publicize it at meetings at all levels. Starting from details, starting from self, and full participation can make energy saving and consumption reduction work more perfect.

2. Implement the person responsible for energy saving and consumption reduction in the factory. Each department should designate a person in charge to supervise and manage the rational use of energy, analyze energy consumption data, set energy-saving and consumption-reducing targets and implement energy-saving and consumption-reducing measures.

3. Actively encourage employees to put forward their own improvement opinions on the links with high energy consumption in production and work, and the heads of relevant departments organize personnel to conduct feasibility analysis and demonstration. For feasible suggestions, designate personnel to be responsible for rectification, and reward relevant personnel for the benefits brought by rectification.

4, strengthen the daily inspection, to ensure that all in place, leaving no dead ends. Effectively reduce or even basically eliminate the "leakage" phenomenon in the production process, and handle it in time if found.

5. Energy consumption mainly includes electricity consumption, water consumption, steam consumption and compressed air consumption. First of all, we should find out the consumption concentration points of various energy sources, such as high-power equipment or high-energy-consuming technological processes. Focus on these points and see if they can be improved.

6. Improve the thermal insulation performance of equipment and pipelines. Such as boiler body, steam distribution drum, steam pipeline, condensed water recovery pipeline, refrigerant pipeline, evaporator, partial reaction kettle, outdoor exposed tap water pipeline, etc.

Although the heat and cold loss caused by heat preservation cannot be calculated quantitatively, it will actually affect the temperature of the point of use. According to the relevant data, if the equipment is not properly insulated, it can cause about 10%~ 15% cold and heat loss.

7. Strengthen and improve relevant measurement management. Without perfect measurement management, it is impossible to accurately count and analyze the consumed energy. Energy consumption such as power consumption, water consumption and steam consumption can be distinguished according to departments or product lines, and electricity meters and water meters can be installed.

Extended data:

You can also make the following suggestions:

First, the company vigorously carried out energy-saving and consumption-reducing publicity activities, and created a good atmosphere of "everyone stresses economy, everything stresses economy, and always stresses economy" by vigorously strengthening publicity and education.

Call on all staff to practice strict economy, implement "four ones" (saving one kilowatt hour, one drop of water, one liter of oil and one piece of paper), put forward reasonable suggestions, link with the economy, and implement the reward and punishment system to improve energy saving and consumption reduction.

Second, strictly control the electricity consumption of the office building, turn off the lighting during the day, and turn off the power in time when the computer is not in use. After work, the heads of all departments and offices should carefully check whether the electrical equipment such as computers, drinking fountains and lighting lamps are powered off.

Third, strengthen dormitory management, connect electricity meters to each room and monitor the electricity consumption of each room every month. It is forbidden to connect the power supply privately and use electrical appliances. If you need to use electrical appliances under special circumstances, you should report it to the property department for the record and report it to the company leader for approval.