Do you want a decoration project acceptance certificate?

The flatness of the wall affects the aesthetic degree, and the uneven wall is easy to crack. The owner can check with the naked eye or ruler.

Two aspects of wall acceptance

The first aspect: the base of pasting wall should be solid, flat and dry, and the angle of yin and yang should be straight and square. There shall be no bubbles, hollows, cracks, warpage, wrinkles and stains on the surface of the pasted wallpaper and wall cloth, and the wallpaper and wall cloth shall be firmly pasted and have the same color.

The second aspect: the seam of wallpaper and wall cloth should overlap at the internal corner, and the external corner should be wrapped tightly without seam. Wallpaper, wall cloth and hanging mirror line, door and window cover, curtain box, skirting board, etc. Adjacent to each other, without gaps.

Second, the acceptance of the circuit

1, take a small appliance with you, such as a rechargeable flashlight, and you can try all sockets.

2, the discharge of electrical lines, in addition to the hollow floor, but also wear pipes, such as PVC pipes, the wall thickness is not less than 65438±0.2mm ... Pay attention to the wall when paying off the wires, and don't walk under the floor or floor tiles.

Three. Waterway acceptance

Flush the toilet several times to see if the running water is smooth. Fill the bucket with water and pour it on the ground to see if the floor drain is unobstructed. Try all faucets, whether they are flexible or not. If you have a water heater at home, be sure to try to see if the hot and cold water are connected backwards.

1. Water pipe: galvanized pipe shall have at least 8 twisted teeth, and the raw material belt shall be tightly wound for more than 6 times, and tooth rot is not allowed. Pay attention to the installation of plastic pipes or aluminum-plastic pipes with special tools, operate in strict accordance with regulations, and finally conduct pressure test (the pressure test time is more than 24 hours).

2. Pay attention to the wall when discharging water pipes, and don't go to the floor, floor tiles or high-altitude discharge. If you must walk under the floor and floor tiles, the installation of water pipes must be straight, and joints are not allowed. The valves should be installed on the ground, and the water inlet pipe of the bucket should be installed with triangle valve.

Fourth, the acceptance of wood

The most important thing is to check whether there is a pungent smell.

general clause

& gt is suitable for manufacturing and installing fine wood products, wooden partitions, floral decorations and high-grade fixed furniture.

Inspection quantity: perception survey, and randomly select 20% of the total allowable deviation items. Products made of a variety of materials must meet the corresponding technical standards according to the different constituent materials.

The variety, quality, grade, model, specification and color of main materials, auxiliary materials and accessories used in wood products must meet the design requirements, current construction acceptance specifications and product technical standards.

Wood used for joinery shall meet the following requirements:

1, wood moisture content ≤ 12% (wood moisture content of rubber parts is 8? 10%);

2. Twill of wood = diagonal length/horizontal length x100% ≤ 20%;

3. Don't use rotten or moth-eaten wood;

4. The diameter of external wood joint is ≤ 1/5 material width or thickness, and the maximum diameter is ≤ 5 mm;

5, appearance materials can't have fast knot, bug eyes, cracks;

6. The hinge diameter of internal material is ≤ 1/4 material width or thickness, and the maximum diameter is ≤ 20 mm.

7. The length of internal material cracks is not greater than the length of members: through cracks are 10%, and non-through cracks are15%;

8. The local thickness of the blunt edge of the internal material is ≤ 1/4 material thickness, and the width is ≤ 1/5 material width;

9, coated parts or storage parts can not have resin capsules;

10, the external timber tree species should be single, with stable wood properties, similar texture and symmetry.

1 1. Tree species with the same rubber components should have similar textures;

12. As far as possible, the lining strips of the cladding should use similar tree species.

Verb (abbreviation of verb) acceptance of tiles

First of all, you chose the tiles yourself! Explain that you recognize its brand, quality, color, and how to accept home delivery?

How to check and accept ceramic tiles after construction?

1. It depends on the use and treatment of facing materials.

It depends on the construction quality.

3. Find and solve quality defects in time.

Intransitive verb floor acceptance

Whether the parquet on the floor is neat, whether the feet feel comfortable when stepping on it, and whether there is abnormal noise. There should be no excess glue on the floor-this is very important, otherwise it will be difficult to clean it up later.

"Eight Raiders" for Home Decoration Acceptance

1. Acceptance standard of water supply and drainage pipeline installation project: the quality of pipelines and fittings shall meet the current standards; Valve installation should be correct and switch should be flexible; After the water pressure test, all pipes, valves and joints shall be free of water seepage and leakage.

2. Acceptance standard of electrical engineering: the leakage switch is installed correctly and used normally; Installation and fixation of electrical devices and equipment shall be firm and stable; Electrical power-on test, lighting test of lamps and lanterns, and good control performance of lamps and lanterns; Switches, sockets, junction boxes and other devices are in good appearance, the insulation devices are free from cracks, and the installation is firm and upright, and the installation method conforms to the regulations; The deviation of switch and socket junction box installed in parallel, and the clearance around the plate and box of concealed switch, socket and junction box conform to the regulations; The weak current system has complete functions and authority, meets the use requirements, and the electrical appliances are installed firmly and correctly.

3. Acceptance standard of pasting project: the pasting project can be accepted only after it is completed and dried; When accepting, check whether the varieties, colors and patterns of materials meet the design requirements; Wallpaper and wall cloth must be pasted firmly, with the same surface color, without bubbles, hollows, cracks, wrinkles and stains, and without glue marks when squint; Smooth surface, no ripple, wallpaper, wall cloth, hanging mirror line, top corner line, sandwich panel, skirting board, sandwich panel and curtain hanging box are next to each other, with a distance of 1.5m, and there can be no obvious gap by visual inspection; Each piece of stitching is horizontal and vertical, and the patterns and patterns at the stitching are consistent, leaving no seams or overlapping; Yin and Yang angles are vertical and angular, with smooth overlapping of Yin and Yang angles and seamless Yang angles; Wallpaper, wall cloth edge straight and tidy, can not have paper wool, flying thorn; There shall be no leakage, subsidy and stratification.

4. Acceptance standard of ornamental design project: the ornamental design project can be accepted only after it is completed and dried; Check whether the varieties, specifications and patterns of ornamental design meet the design requirements when accepting ornamental design works; The ornamental design should be installed firmly, and its quality requirements and allowable deviation should meet the following requirements: the horizontal and vertical allowable deviation of strip ornamental design should not be greater than 3 mm; The allowable deviation of individual ornamental design position shall not be greater than 65438±00mm；; The surface of ornamental design should be smooth, with clear patterns and tight joints, and there should be no defects such as cracks, warpage and lack of edges and corners; The decorative surface should be smooth, with clear patterns and no cracks.

5. Acceptance standard of suspended ceiling project: the variety, specification, color, basic structure and fixing method of materials used in suspended ceiling project shall meet the requirements of relevant design specifications; Cover panel and keel should be closely connected, the surface should be smooth, and there should be no defects such as pollution, cracking, lack of edges and corners, hammer injury, etc. , the seam should be uniform, there should be no delamination of the pasted cover panel, and there should be no planing of plywood; Shelved cover plates shall be free from leakage, penetration and warping.

6, wooden floor installation acceptance criteria: materials should meet the requirements of households and current product standards; Floor installation (bonding) should be firm, silent and free from looseness; The surface of the wooden floor should be planed and polished, without gouging marks, gouging residues and burrs, and the pattern (wood grain) of the painted floor should be clear; Joints of parquet floor should be aligned, with the same gap width, clean surface and no glue overflow; The skirting board is closely connected with the floor; The skirting board has a straight upper edge, and the total height difference should not be greater than 3 mm, and there is no seam close to the wall.

7. Acceptance criteria for construction quality of plastic surface course: materials, colors and paving shall meet the requirements of residents; The surface shall be flat, smooth and wrinkle-free, and shall not be warped or blistered; Consistent colors, tight seams and straight edges. Degumming place shall not be greater than 20mm, and the spacing shall not be less than 500mm. The joint with the pipeline should be tight, firm and smooth; The skirting board is closely connected with the plastic board, the upper edge of skirting board is straight, the overall height difference is not more than 3 mm, and there is no seam close to the wall.

8. Acceptance criteria for slab construction quality: materials and patterns meet the requirements of residents, and product quality meets national standards and technical regulations; The shop is stuck firmly, not loose, and the leveling height difference with the ground is not more than 0.5 mm; The paving pattern is clear, without stains and pulp marks; Seam straight, pull through seam inspection, deviation is not more than 2 mm; The joint width is not more than1.0mm; The height difference of joints between blocks is not more than 0.5mm. ..