How to deal with the troubles of sweeping cars?

Driving a sweeper appears more and more frequently in our cleaning companies, property companies, factories, large squares and other places, which not only improves the cleaning efficiency, reduces the work difficulty of cleaners, but also improves the income of users, killing two birds with one stone. A car that can sweep the floor will break down for a long time, so there should be corresponding treatment methods to check the fault.

A, sweep the floor when the car makes a noise.

Fault analysis: If the sweeper makes abnormal noise when walking, it may be caused by the impact of large iron blocks or other objects in the dust bucket under the action of walking and shaking.

Recommended solution: (Troubleshooting method for abnormal noise of sweeper)

Please check whether this is the reason. If yes, please clean up the foreign objects in time. If not, please contact Wanshenglong professional after-sales personnel to solve the problem in time. Don't operate it yourself.

Second, the sweeper (brush) does not move.

Fault analysis: If the sweeper just walks and won't sweep the floor, it is likely that linear objects are entangled in the main brush (main brush and side brush). Please check the main brush (main brush and side brush) for this condition. If yes, please carefully cut short the object with scissors to clean it, and avoid doing it again (note that the sweeper is forbidden to clean ropes and linear objects).

Recommended solution: (Troubleshooting method for brush not rotating of sweeper)

First, the main brush of the sweeping car should be replaced.

B, eliminate entanglement

C. replace v-belt (drive belt)

D, replace the main brush motor (check and replace the fuse)

E, the fuse is slippery (contact our after-sales department to check and replace the main brush/side brush motor).

Third, the dust is too large when the sweeper cleans roads, factories and workshops.

Fault analysis: If the dust may be too large during cleaning, it is likely that the filter element is blocked or damaged, which leads to dust flying and has a counterproductive effect.

Recommended solution: (Measures to investigate excessive dust in floor sweeper)

A, open the dust switch (stop working, open the dust switch)

B, replace the filter

C turn off the side brush switch (turn off the side brush switch, only use the main brush for cleaning (applicable to some models))