What is the reason for the lack of electricity in the room socket?

Most people have many sockets in their rooms. In the process of use, if the socket is dead, be sure to find out the reason. Let's talk about the reason why the socket in the room is dead.

What is the reason for the lack of electricity in the room socket?

1, it is possible that the switch socket is out of power due to the lack of power at home.

2. It is possible that the line trip will also cause the socket to be dead.

3. It is possible that the socket is dead because the valve can't be pushed up when it is empty, indicating that there is leakage.

4. It is also possible that the socket is aging and damaged, which leads to the phenomenon that the socket has no electricity.

What should I pay attention to when installing the socket?

1, when installing the socket on the wall, be sure to choose a good location. If there are flowers or waistlines on the wall, the socket cannot be installed on it. If it is difficult to install, it is even more difficult to fix the socket on this wall.

2. When installing, it cannot be installed at the junction of two tiles, otherwise the later damage rate will be higher. It is best to install it in the middle of tiles.

3. The socket should be installed in the right way. You can consider plain clothes or concealed clothes. For example, air conditioning can be surface mounted, about 1.8 meters from the ground. The installation height should be higher than the ground to prevent electric shock. The socket is too low from the ground and should be hidden, not less than 0.3 meters from the ground to prevent children from touching it. It is best to choose a safety socket with a safety cover.

4. If it is a three-eye socket, it must be connected according to the wiring requirements. The upper grounding hole should be connected with the grounding wire, and the installation must be firm.

5. When installing the refrigerator, pay attention to its independent socket with protective grounding. If you use it in the bathroom, choose a waterproof cover to prevent water droplets from splashing on the surface of the socket, which is in danger of electric shock.