Power outage emergency plan processing flow

Legal analysis: 1) When the personnel on duty find that there is a sudden power failure in the community, they should immediately notify the maintenance personnel and other relevant personnel to arrive at the scene; 2) Take corresponding measures according to the power outage range; 3) Contact all elevator cars by communication intercom or other ways of elevator configuration to determine whether there are trapped people in the elevator cars and check them one by one; 4) start the generator set; 5) Turn off the main switch of the elevator and each unit, finally turn off the main switch of the transformer load side, and turn off the high-voltage isolating switch when necessary; 6), close the generator power output master switch; 7), check whether the double switch is in the standby gear; 8) turn on each loop switch in turn; 9) Check whether all power switches and control switches are turned off before power transmission, and then power transmission step by step after confirmation, so as not to burn out electrical components; Ten), stop, power transmission must have the necessary protective measures, at least two people work together, single operation is prohibited; 1 1) Observe the operation of elevators, pumps and other facilities; 12), the main power distribution room and the generator room each have one person on duty until the power supply returns to normal; 13), in a timely manner in the public * * * area such as each channel, unit mouth posted warm tips to inform the owner.

Legal basis: Article 18 of the Emergency Response Law of People's Republic of China (PRC), according to the provisions of this law and other relevant laws and regulations, specifically defines the organization and command system, responsibilities, prevention and early warning mechanism, disposal procedures, emergency safeguard measures and post-emergency recovery and reconstruction measures of emergency management in view of the nature, characteristics and possible social harm of emergencies.