Is there any way to improve the heating in the house?

Honey, I'm happy to answer your question.

There is a solution to the problem that the heating is not hot.

1. Exhaust of the heating water separator If the heating is not hot, look at the exhaust of the heating water separator. For example, you can turn off the inlet water of the heating and the small valves of each pipeline, then connect a small water pipe to the exhaust valve of the backwater pipeline, open another group of small valves, and then open the main valve, and wait for about 5 minutes. When only one group of water pipes comes out, close the small valve of the other group, close the exhaust valve after the pipes are exhausted, and finally open all the grouped pipes and the main return valve.

2. Check the filter of the heating pipe. When the heating is not hot, you can ask the residents upstairs if the heating is normal. If it is normal, it may be that the filter screen is blocked. In this case, as long as the main valves of water inlet and water return are closed, the filter screen can be removed for cleaning.

3. Check whether the floor heating pipeline is blocked. For example, it is still not hot after cleaning the heating filter. Please ask the heating maintenance master to check whether the heating pipe is blocked. Because there is silt in the pipeline, it will also lead to poor running water in the pipeline.

4. If the high-rise building with hot water circulating pump is not hot, you can consider increasing the backwater speed, and the temperature can be increased through the hot water circulating pump.

If it helps, please adopt it and like it. Thank you.