What should the owner do if the load-bearing structure of the house is demolished? Matters needing attention in wall structure demolition and reconstruction.

Now many owners will transform the structure of their houses when decorating them, and then decorate them according to their own needs. What should some owners do if they demolish and change the load-bearing structure of their houses? At this time, the owner violated the agreement and must restore the load-bearing wall. Let's take a look at the matters needing attention in the demolition and reconstruction of wall structures.

1. What should the owner do if he dismantles and changes the load-bearing structure of the house?

The main damage to the load-bearing structure violates the agreement and also affects the safety of the building. Therefore, there is a factual and legal basis for the property company to require the owners to restore the original state. Therefore, from this perspective, the property has the right to ask the owners to rectify the illegal decoration. If the owner fails to restore the damaged load-bearing structure to its original appearance in time or fails to restore it at all, it is reasonable, reasonable and legal for the property to sue the owner.

The Reply on Several Issues Concerning the Restoration of the Bearing Structure of Damaged Buildings stipulates that the restoration of the bearing structure of damaged buildings must meet the following conditions: First, the strength of the original components must not be reduced; Second, it must not be lower than the material standard of the original parts; The third is to restore the shape of the original parts; Fourth, the structural measures at the repair site should comply with the relevant technical regulations. The repair of load-bearing structure is mainly based on the site damage and the original drawings to repair the damaged structure. According to the above steps, the design requirements can be achieved.

Second, the wall structure demolition matters needing attention

1, look at the data on the floor plan.

In the room plan, the walls marked in black on the engineering drawing are all load-bearing walls, while the walls marked in white are non-load-bearing walls. Such a wall can be rebuilt and demolished without affecting the construction.

2. Look at the structure of the house

Generally speaking, the walls of brick-concrete buildings are load-bearing walls. The outer wall of a house with frame structure is a load-bearing wall, but the inner wall is generally not.

3. Look at the grade of the house

Generally, low-rise houses, bungalows and villas are brick-concrete structures, and the fundamentals are load-bearing walls. Both the high-rise elevator building and the foreign building are frame structures.

4. Look at the thickness of the wall

Non-bearing walls are relatively thin, generally about 10 cm thick. Pat it with your hand. It is a light wall with a crisp echo, and the thickness of the load-bearing wall is generally above 240MM, so there should be no too much noise when it is tilted.

The above is about how the owner removes and changes the load-bearing structure of the house, as well as the matters needing attention in removing and changing the wall structure. I hope I can help you!