Do you want a plan to clear the shopping mall?

Land reclamation is a comprehensive project, because construction projects often leave a lot of garbage and dirt, involving all the decoration surfaces inside and outside the building, and the degree of dirt is rare. All kinds of grinded stones will leave cement slurry, paint, glass glue, water pollution and rust on the wall, which must be cleaned up during land reclamation, so it is the hardest, most complicated and demanding job. The quality of land reclamation project will directly affect the quality and grade of future cleaning work, so it is very important to do a good job of land reclamation. The procedure of land reclamation is as follows: 1. Rough land reclamation: cleaning up the decoration garbage left by the construction site is generally completed by the construction unit. 2. Fine land reclamation: 1. Walls: Different methods are adopted according to different wall materials: a. Stone and wall brick walls can be cleaned and maintained with liquid cleaner and water, and the liquid cleaner should be neutral. Attention should be paid to the cleaning and maintenance of joints and concave-convex surfaces of plates. When cleaning with water, you must pay attention to protecting the ground; B metal walls can be cleaned and maintained with liquid cleaner and water, and the liquid cleaner should be neutral. Wet metal walls must be dried before using metal brighteners. When cleaning with water, we must strengthen the protection of the ground. C. Do not use detergent water to clean and maintain painted walls. The floating ash on the wall should be cleaned with a dust duster or wiped with a dry rag. Generally, it should not be wiped with a wet rag. Local deep pollution can be wiped with a wet rag and a special cleaner when the paint surface allows. For the water stains and traces caused by wiping the wet rag, paint of the same brand and color number should be used to repair them in time. D. The baseboard is the last process of wall cleaning and maintenance. The skirting line is made of wood, plastic, stone and glaze. The seam of the skirting line and the plane connected with the wall are the key points of cleaning and maintenance. The wooden baseboard should be carefully cleaned and maintained with detergent water.

Be careful. 2. Glass and doors and windows: the door is the face of the property, and the glass and windows are the eyes of the property. There is a saying that the window is bright and clean, so the cleaning of the door and window glass is particularly important. A. Door: Distinguish the material of the door, dilute it with a professional cleaner and wipe it with a towel. The procedure is to fold the towel into a square from top to bottom and wipe it from left to right from the top of the door without omission. Where there is glue stain, it can be treated with glue remover; Box program of the same door; Make sure there are no omissions and no dead ends. The lower part of the handle and the hinge are the key points of cleaning and maintenance. B. Glass: before wiping, clean the glass frame with a towel, then dip it in diluted glass water solution with a water splash device, evenly smear the glass from top to bottom, remove stubborn stains with a shovel, scrape it off with a scraper from top to bottom after repeating the above procedures, wipe off the water marks left on the frame with a dry towel, and wipe off the water marks on the glass with a machine skin; C windows: clean the dirt and dust left at the hinges, railings and joints of window frames; D. When cleaning and maintaining glass, doors and windows, attention must be paid to protecting the ground. 3. Floor: The cleanliness of the environment is first manifested on the floor, and different cleaning methods are adopted according to different floor materials: a. Glazed tile floor: first scrape off the dirt and protect the wax layer on the surface of glazed tile with a scraper, and then clean it mechanically. B. Stone floor: distinguish granite from marble. When choosing cleaning agent, you should master the pH value. C. Wood floor: It can only be wiped with a wet rag dipped in detergent, and it can't be washed directly with water, let alone cleaned mechanically. D. Composite floor: You can only wipe it with a wet rag dipped in detergent, and you can't clean it directly with water, let alone mechanically. 4. Bathroom: adhere to the principle of top-down, first recognize the material of the bathroom ceiling, whether it is PVC, aluminum-plastic board or paint, and then use different cleaning methods according to different materials; Clean the bathroom wall with a cleaning ball or brush, focusing on the cracks in the tile and the glue marks, paint spots and cement stains left on the surface of the tile; Wash the sanitary ware in the bathroom with a towel, and clean all kinds of faucets and pipe fittings with stainless steel cleaning solution; Finally, the floor is cleaned by the washing machine, especially the corners of the floor. The corners that cannot be washed by the washing machine are targeted for decontamination and cement stains with cleaning balls and blades; Finally, after checking that there are no omissions, wipe the faucet and other pipe fittings with a dry towel again. 5 * * * Passage: Use a vacuum cleaner or vacuum cleaner for the wall.