I like voice control lights very much. How to answer the voice control light if you want to install it?

I like voice control lights very much. How to answer the voice control light if you want to install it?

The working principle of voice-activated induction lamp is actually an automatic switch control circuit, which has many kinds. The ways to turn on the switch (i.e. turn on the light) are voice control, trigger, induction, light control and so on. The closing mode is basically the same, and they are all controlled by delay circuits (automatic closing after working for a period of time).

For the installation of the sound control lamp, directly connect the two wires of the sound control lamp holder with the reserved wires, and fix the lamp holder with screws.

Install the sound control light switch, which is the key to installation. Switchgear generally has four wires, two of which are connected to the zero line, one to the special fire line and one to the fire line.

First, turn off the power supply and turn on the reserved installation switch position, revealing four red, yellow, blue and green connectors.

Remove the side cover of the switchboard. (pictured)

Open the back of the box (as shown). L 1 is connected to the red fire wire, 2F is connected to the yellow wire connector, and 3A is connected to the green zero wire.

Fix the sound control light switch, drill the hole with an electric drill and install the rubber plug, then fix the screw on the wire box with a screwdriver and install the side cover.

Pay attention to the installation details of voice-activated induction lamp:

(1) The LED lamp is internally rectified and then passes through the switch tube transformer (with or without LED lamp and transformer, saving cost). The power of LED is too small to form a power supply loop with ordinary voice control, so your ordinary voice control switch is not compatible with LED.

(2) The ordinary cheap voice control switch provides holding current for the voice controller through the circuit formed by the incandescent lamp, so it is no problem for the ordinary incandescent lamp to cooperate with any voice controller.

(3) The solution is to buy a special LED light voice-activated switch (with its own power supply), or take your light to the store to find several brands of voice-activated switches to try, and buy them if they work. Buy yourself a voice-activated lamp holder and then find a property electrician or a friend who knows electricity to install it. Buy a sound control lamp holder around 20 yuan, but you can't buy a high-power light bulb, preferably below 50W. If the power is high, the circuit on the lamp holder will burn out.

Induction lamp related installation steps:

(1) The voice-activated induction lamp bought online is usually sent without instructions.

(2) Installation method: Cut the red wire of the lamp holder and connect it to the live wire and the zero wire. If you don't distinguish between live wire and neutral wire, remember to turn on the light bulb first, connect the wire and then turn on the electricity. If it's answered during the day, it can be ignored after it's connected, because it won't light up during the day, because it's induction lamp. After connecting, you can see the effect at night. If it doesn't work, we'll say the light bulb needs to be changed. If the light bulb doesn't work at night, we can cut off the power and replace it.