Elevator safety emergency plan

In recent years, elevator accidents often occur, so it is necessary to make them. Next, I will share it with you, hoping to help you.

When the elevator breaks down, the elevator administrator immediately informs the person in charge of the unit and the maintenance personnel, and the maintenance personnel or rescuers can try to release the trapped passengers first according to different situations.

A rescue plan for people trapped in the elevator

1. Rescuers can get in touch with trapped passengers through walkie-talkies or mobile phones.

Be sure to ask passengers to stay calm and wait for rescue. Trapped passengers are not allowed to stick any part of their bodies out of the car. If the door is in a half-open state, rescuers should try to completely close the door to prevent accidents.

2. Accurately judge the position of the car and prepare for rescue. We should judge the position of the car according to the floor indicator light, PC monitor, floor selector crossbar or door opening, and then try to rescue the passengers.

3, rescue steps:

3. 1 Rescue steps when the car stops near the elevator entrance:

① Turn off the power switch of the machine room;

② Open the outer door with a special lock key;

③ Open the car door slowly by manpower at the top of the car;

(4) assist passengers to leave the carriage;

⑤ Close the hall door again.

3.2 Rescue steps when the car is far away from the elevator:

① Enter the computer room and turn off the fault potential power switch;

(2) Remove the motor tail shaft end cover and press the knob seat and knob;

(3) Rescuers hold the handle hard, and another rescuer holds the brake release lever lightly.

Gently pry open the brake, pay attention to the plane sign, and make the car move gradually until it is 0.5M away from the hall door.

(4) After confirming that the brake is correct, loosen the turning handwheel, and then rescue according to the method listed in 3. 1.

In case of other complicated situations, please ask the elevator company for help.

5, at the end of the rescue, elevator management personnel must fill in the rescue record and archive, in order to accumulate rescue experience.

2. Disposal measures in case of fire.

1. When there is a fire on the floor, the elevator manager should immediately try to press the "fire switch" to make the elevator enter the fire prevention execution state; After the elevator goes to the base station, instruct the passengers to leave the car quickly, and inform the college leaders by telephone, at the same time, telephone 1 19.

2. When there is a fire in the hoistway or car, stop the elevator immediately and guide the passengers to leave. After cutting off the power supply, use dry powder fire extinguisher or 12 1 1 fire extinguisher to extinguish the fire. And call the hospital leaders; If the fire is fierce, you should call the police immediately 1 19 to ensure the safety of people and property in the building.

3. Handling measures when the elevator is flooded.

1, when the tunnel is flooded, the elevator should stop above the second floor;

2. When the floor is flooded, stop the elevator on the flooded upper floor, then turn off the main power switch and immediately organize personnel to block the water source. After the water source is blocked, dehumidify it, such as hot air drying.

3. After the technical test, when it reaches the standard, you can try the ladder. After the test ladder is normal, it can be put into normal use.

Emergency treatment of abnormal situation

When the elevator is abnormal, passengers should be calm and keep a clear head in order to find a safer solution.

In case of personal injury accident, in addition to taking necessary emergency measures and protecting the site, immediately notify the person in charge of the unit and professional maintenance personnel, and report to the principal's office, and call "120", "10" and "19" for rescue as appropriate.