What is the problem with Sanyo Didu washing machine E90 1?

E90 1 fault alarm appears in the washing machine, which may be due to excessive current. Please make sure that the power socket is plugged in, and turn on the machine to see if the panel is on. If it doesn't light up, please try another socket to see if there is any response. In case of power failure, contact the property electrician to check the power supply.

It is more likely that there is a problem with the frequency conversion board of the washing machine, which may be due to the following reasons.

1, the cover of the washing machine was not closed, which led to the failure of the program safety self-check, and an automatic alarm was generated to stop the operation. Close the lid of the washing machine.

2. There are sundries in the drainage pipeline, resulting in program errors. When the washing machine stops, it is necessary to disassemble the rear baffle of the washing machine, remove the drain pipe and use tools to clamp out foreign objects.

3. The high current lock is broken, and the frequency conversion board needs to be replaced.

If there is, it is not convenient to handle it. It is recommended to contact the official after-sales customer service for consultation.

Extended data:

Fault code of Sanyo Didu washing machine

1, F 1: The water level sensor of Sanyo washing machine has poor contact;

2.E 1: Sanyo washing machine drains overtime, check whether the drain pipe is blocked;

3.E2: The upper cover of Sanyo washing machine is not covered properly;

4, E3: Sanyo washing machine dehydration imbalance, shake clothes out and then dehydration;

5.E4: The water inlet of Sanyo washing machine is overtime, so check whether the water pressure and water inlet valve are dirty or blocked;

6.E5: The water temperature of Sanyo washing machine exceeds 50 degrees;

7.E6: Did Sanyo washing machine use high foaming washing powder?

8.E 1 1。 Abnormal water inflow, failing to reach the set water level for 20 minutes;