How to approve putty? What are the points and details of house inspection?

Buying a house is a huge systematic project. The last step in buying a house is to wait for the house to be closed and inspected. The waiting process is very long. Many buyers are anxiously waiting to get their new houses. When the house is actually closed, people often miss the precautions of house inspection because of excitement. Then, how can this batch of putty be hung on the net? What are the precautions and details of house inspection?

How to hang the net for batch putty?

Hang the grid cloth first, and then blow the putty. Non-load-bearing walls need to be pasted. Here, you need to choose good quality wall paint or white latex. If personal conditions are good, you can use grid cloth, which has better shock-proof effect. In addition, putty needs to be constructed for 2 ~ 3 times, and each construction needs to wait until the last time to be completely dry.

What are the precautions and details of house inspection?

1, concealed works, including water circuit reconstruction, ceiling structure and bathroom waterproofing works. The ceiling structure is not shown on the as-built drawing, but it can be seen on the side of the hardcover room, the lamp position or the air outlet of the central air conditioner. According to the regulations, light steel keel must be used for the ceiling of concealed works.

2, air quality, the owner must first carefully check the list of decoration materials, according to the provisions of the standard to compare whether harmful substances exceed the standard. After the completion of the project, the developer shall provide the owner with an indoor environment test report certified by an authoritative organization. All those approved by the state are marked with CMA, and others are invalid.

3. Waterways include three kinds: tap water, hot water and reclaimed water. Reclaimed water is usually used in toilets, not drinking water. The material of the water pipe directly affects the life of the waterway system and the water safety of the owner, so as to ensure the use of qualified materials.

3. The owner can ask the property management company for the as-built drawing, and check the model of the house wire, the position and combination of the socket, and the capacity of the maximum power consumption equipment. On-site inspection of whether the leakage protection switch of distribution box is illuminated, whether the socket is shunted by power, and whether the switch is beautiful and available are all details that should be paid attention to when inspecting the house.

4, waterproof test, pour water in the bathroom, test whether the water is unobstructed. There is no water in the floor drain, which means that the water in every sewer is unblocked. Verify building materials. The main materials used in the project should be accurately marked in the contract, especially the equipment with high brand gold content, such as sanitary ware, lamps and kitchen equipment. In addition to the brand, it is also necessary to make clear the model and origin of the equipment as far as possible.

The above are all about how to hang the net of batch putty and what precautions and details are there in house inspection. I hope I can bring you some help. Housing inspection is a very key link in the process of buying a house, but some property buyers are often careless in this step and will not find problems until they move in.