What information does the Notice of Shenzhen Construction Safety Production need?

First, the basic content of the notice

1. The project manager is the first person in charge of the project safety production, and takes full responsibility for the project safety production. The project manager must hold relevant certificates (qualification certificate and safety qualification certificate).

2, the construction project must establish a clear responsibility system for production safety, implement the target management of production safety responsibility, improve the production safety management network, equipped with full-time (and) security personnel and security librarians in accordance with the provisions.

3. A construction project must apply for safety supervision to the construction administrative department where the project is located within fifteen days after the commencement of construction, and handle accident insurance for the construction personnel.

4, the construction unit must have the basic conditions of safe production, to ensure the cost of safety protection equipment.

5, all kinds of personnel working in the construction site must carry out safety training and education, special operations personnel must hold relevant certificates.

6, the construction unit must prepare the construction organization design and safety technical measures, professional projects, should prepare special safety technical measures, implemented after approval.

7. In the construction of building projects, the site enclosure shall be implemented, and "six cards and two maps" shall be set up according to regulations, so as to improve the working, operating and living environment and do a good job in civilized construction on site.

8. Major hazard sources shall be registered and filed, regularly tested, evaluated and monitored, and emergency plans shall be formulated to inform employees and relevant personnel of the emergency measures to be taken in case of emergency.

9. If the investigated construction project violates the relevant provisions of national production safety, it must be rectified, and major hidden dangers should be rectified immediately within a time limit. If it refuses to be rectified or fails to make corrections within the time limit, it should be reported to the construction administrative department where the project is located.

10, in case of production safety accidents in construction projects, rescue should be organized immediately, and report step by step in time according to regulations, and no concealment, delay or omission is allowed.

Second, the specific content of the notice.

1, temporary electricity consumption at the construction site

The external power supply in the construction site cannot meet the requirements of safe distance and must be protected. Temporary power consumption is designed according to temporary power supply, three-phase five-wire system, three-level distribution and two-level protection, so as to achieve "one machine, one box, one brake and one leakage". Buried and overhead lines must comply with JGJ46-88 temporary power supply specifications. Flower thread and sheath line are strictly prohibited on the construction site. Safe voltage must be used in special places (such as dormitories and offices). ) 2.4m below and wet working environment.

2, lifting machinery, construction machines and tools

Lifting machinery on the construction site (including tower cranes, material hoists and construction hoists) must use registered products of Shandong construction industry, and the demolition team shall implement qualification management. Operators must hold relevant certificates, and the installation (disassembly) must be carried out according to the plan. Before the hoisting machinery is used, it shall be accepted by the enterprise and the project department, and it shall be used after passing the inspection by the hoisting machinery inspection department.

The setting, use and protection of construction machinery must meet the requirements of JGJ59-99 Safety Inspection Standard for Building Construction and JGJ33-200 1 Technical Specification for Safe Use of Construction Machinery.

3, basic engineering

Foundation pit excavation and support must be carried out as planned. For deep foundation pits, troughs and holes (more than 5m), special construction schemes must be formulated, with layered and segmented construction and dewatering and drainage measures. And do a good job in monitoring and protecting the settlement of surrounding buildings, communications and pipelines. Slope support, limb protection, stacking and setting of materials and machinery around pits, grooves and holes must comply with relevant regulations.

4, scaffolding engineering

The construction project should choose a reasonable and safe frame form and carry out the construction as planned. Floor-standing scaffolding shall be erected and accepted by sections according to regulations, and the height of the operating scaffold shall be greater than 1.2m of the building, and water deflector and footboard shall be provided. When construction is carried out to the top of the first floor, a flat net in the frame should be set around the building, one for every increase in height of 10m, and a dense mesh safety net should be set along the height of the frame. It is forbidden to pile materials on the frame, and it is forbidden to use the frame as a support to build a receiving platform.

Cantilever scaffolding must be built according to the plan, and design and calculation should be carried out. Cantilever beam of cantilever scaffold should be made of I-beam or channel steel, and the bottom of vertical pole should be fixed to ensure no displacement. The fixing method of cantilever frame should be determined according to design and calculation, with rigid connection and fixed on the building with tensile steel wire rope. The protection of cantilever scaffold shall be carried out in accordance with specifications and standards.

Attached lifting scaffolding must use products certified by the Ministry of Construction and registered by the province. Its construction team must have professional contracting qualification. Its technical indicators and parameters must meet the design requirements, and the anti-falling and anti-tilting devices must be safe and reliable, and the protection must meet the specification requirements. After acceptance, it can only be used after it is tested by the testing department.

Scaffolding construction is subject to qualification management, and operators must hold relevant certificates. Construction without a license is strictly prohibited. Scaffolding steel pipe and fastener materials must meet the requirements. The vertical and horizontal poles, vertical and horizontal sweeping poles, wall parts and bracing at the main nodes of scaffolding must be set up in accordance with the regulations and conform to the specification requirements.

5, template engineering

Template engineering must be organized according to the construction plan, and ultra-high and long-span template engineering must be strictly designed, approved and accepted. The rigidity and stability of the supporting system should be ensured and the construction load should be reduced as much as possible. The formwork shall be dismantled with a permit system, and the supporting system shall be erected according to the specification requirements. Cross operation shall not be carried out in the same vertical plane.

6, decoration engineering

In the decoration stage, the protection must be strict, and the line erection, lighting, hand-held power tools and machines must meet the requirements of temporary electricity consumption specifications and safety regulations. The machines and tools for exterior wall decoration must have anti-falling devices and protective measures.

7, high homework

When working at a height of 2m (including 2m) from the reference plane of falling height, safety technical measures must be formulated. The edge and hole protection should meet the requirements of aerial work specifications.

8. Safety protection articles

The distribution box, five-core cable, safety flat net, vertical net, electrical components and other products used in the construction site must be qualified registered products in the province. Steel pipes and fasteners must be inspected and tested in batches before they can be used.

9, civilized construction management

Civilized construction on the construction site should comply with the Standard for Safety Inspection of Building Construction and the relevant regulations of the project location and city, promote the use of environmentally-friendly color-coated enclosure and color-coated steel board houses, promote the use of stereotyped and tooled safety protection appliances and facilities, and improve the level of safe and civilized construction on site.

10, other projects

Other projects on the construction site or problems not mentioned above shall meet the requirements of national, industrial and local standards and specifications.

Three. Relevant laws, regulations, rules and normative documents

1, Building Law of People's Republic of China (PRC) (Order No.9 of Chairman People's Republic of China (PRC)1);

2. Law of People's Republic of China (PRC) on Work Safety (Decree No.70 of the President of the People's Republic of China)

3. Provisions on the Reporting and Handling of Casualty Accidents of Enterprise Employees (Decree No.75 of the State Council of the People's Republic of China)

4 provisions of the State Council on the investigation of administrative responsibility for extraordinarily serious safety accidents (DecreeNo. 302nd of the State Council of the People's Republic of China)

5. Procedures for reporting and investigating major accidents in engineering construction (Decree No.3 of the Ministry of Construction of People's Republic of China (PRC))

Regulations of Shandong Province on the Administration of Construction Market (Announcement No.92 of the Standing Committee of Shandong Provincial People's Congress)

7. Regulations on the Administration of Construction Safety in Shandong Province (OrderNo. Shandong Provincial People's Government 132)

8. Provisions of Shandong Province on the Supervision and Administration of Work Safety (OrderNo. Shandong Provincial People's Government 14 1)

9. Provisions on Supervision of Mandatory Standards for Engineering Construction (Order No.81of the Ministry of Construction of People's Republic of China (PRC))

10, Regulations on Safety Supervision of Special Equipment, Order of the State Council of the People's Republic of China (No.373)

Normative documents and standards

1, Regulations on the Supervision and Management of the Use of Safety Protection Articles and Mechanical Equipment on the Construction Site (documentNo. Jian Peijun [1998] 164 of the Ministry of Construction, the State Administration for Industry and Commerce and the State Bureau of Quality and Technical Supervision).

2. Interim Provisions on Safety Training and Education for Employees of Construction Enterprises (Jian Peijun [1997] No.83 document of the Ministry of Construction)

3. Interim Provisions on the Management of Attached Lifting Scaffolds in Building Construction (Jian Peijun [2000] No.230 of the Ministry of Construction)

4. Measures for the Administration of Decoration and Decoration of Construction Projects in Shandong Province (Shandong Provincial Construction Department Document Lu Jianfa [2000] No.63)

5. Regulations of Shandong Province on the Administration of Construction Safety, Civilization and Hygiene Sites

(Document of Shandong Provincial Construction Committee and Shandong Provincial Construction Engineering Administration: Lu Jian 'anjian [1997] 13)

6. Regulations of Shandong Province on the Management of Construction Site Safety Technical Data (Document No.28 of Shandong Provincial Construction Committee and Shandong Provincial Construction Engineering Administration [1999])

7, the building construction safety inspection standard (China people * * * and national industry standard JGJ59-99).

8. Technical Specification for Safety of Temporary Electricity Use in Construction Site (People's Republic of China (PRC) and national industry standard JGJ46-88)

9. Technical Specification for Safety of Working at Height in Building Construction (People's Republic of China (PRC) and national industry standard JGJ80-9 1)

10, Technical Specification for Safety of Gantry and Derrick Material Hoists (China People * * * and national industry standard JGJ88-92).

1 1, Technical Specification for Safety of Fastening Steel Pipe Scaffolds for Building Construction (JJ130-2001), Partial Revision of Fasteners for Building Construction (Jian 'an No.3, 2003)

12, technical specification for safety of portal steel pipe scaffold in building construction (JGJ 128-2000)

13, Technical Specification for Safe Use of Construction Machinery jggj33-2001

14, Notice of the Ministry of Construction on Printing and Distributing the Order of the Ministry of Construction (No.82 [2003] of the Ministry of Construction)

15, Technical Code for Safety of Building Construction Material Hoists (Shandong Engineering Construction Standard DBJ 14-0 15-2002)

Love rabbit, official account of WeChat, you can send for help.