The best way to turn over old and new floor tiles

The best way to turn over old and new floor tiles

The best way to renovate old floor tiles, such as decoration and home choice, will be our focus. Different methods and materials have different effects. The following is the best way to turn over the old and new floor tiles.

The best way to renovate old floor tiles 1 One of the renovation methods of tile floor: lay new tiles on the old tiles.

If the original tiles at home are thin and it takes time and effort to remove tiles, it is better to directly lay new tiles on the old tiles. This method is to brush ceramic tile surface treatment agent and ceramic tile inlay glue on the surface of old ceramic tile, and then lay new ceramic tile on the old ceramic tile. This construction method is simple and easy to operate, and it can be completed by itself without paying labor.

The second method of tile floor renovation: laying wooden floor on old tiles.

I remember that even if the tile floor was renovated in the old house, it had to be removed and leveled again before it could be paved. Removing tiles is not only time-consuming and expensive, but also makes the house full of dust, which is really troublesome. But now there is a new method, and laying ceramic tile floor directly on the ceramic tile floor solves all the problems. The tile floor has been leveled in the previous laying process. Using ceramic tile bottom can ensure the flatness of indoor floor, and it will be easier to lay wooden floor.

The third method of tile floor renovation: spreading floor leather on old tiles.

If the old house is rented, the floor tiles are very good, but the color is not very good, and young people don't like it. The cost of replacing it with wooden floors is too high. Floor leather is the best choice at this time. The biggest advantage of floor leather is that the paving steps are very simple, just clean the tiles and cut them according to the size of the room. Bring your own adhesive, and then spread it out for leveling, so that the floor leather is paved without keel laying.

The best way to renovate old floor tiles 2 1. Lay new tiles on the old tiles.

If the tiles that need to be renovated are very old, you can take the renovation measures of laying new tiles directly on the basis of the old tiles. However, this kind of operation is more complicated, and everyone must find professionals to operate it. Moreover, it should be noted that if there are empty tiles, this area should be eradicated, then filled with some other tiles, and then new tiles should be laid on this basis.

Step 2 paste glue

Sticking glue is a ceramic tile renovation measure that has emerged in recent years. Glue the tile, the operation is very simple, just stick it on the tile. There are various patterns and colors on the adhesive tape, which can not only cover the tiles, but also add your favorite patterns on the surface of a single solid color tile. Be sure to ask the staff about the specific operation method when purchasing, so as to avoid wasting materials.

Step 3: Recolor

After long-term use and consumption, some cracks and fading will inevitably appear on the surface of ceramic tiles, which is also a normal phenomenon. No tile can last for ten thousand years. If you don't want to reinstall, you can try repainting with special tile paint to restore the beauty of the past. But when brushing ceramic tiles, avoid brushing the joints, so as not to affect the appearance.

Step 4 clean old tiles

Tiles are used for a long time, and the surface is easy to accumulate scale and oil stains, especially at the joints of tiles, so they will look old and dim. At this time, the easiest way to use it is to clean the tiles. When cleaning, it is recommended to thoroughly clean the surface with decontamination paste. If you deal with cracks in ceramic tiles, you can brush them off with a toothbrush dipped in decontamination paste. Finally, clean it with water and dry it. If the effect is not satisfactory, you can also use a polishing grinder to polish the tiles. Although it can restore the transparency of tiles, it will have a certain impact on the integrity of patterns and textures.

The best way to renovate old floor tiles 3 How to renovate second-hand house tiles?

How to renovate second-hand house tiles: directly lay new tiles.

At present, there are special brick wall renovation materials on the market, mainly ceramic tile surface treatment agents and adhesives for ceramic tiles and mosaics. We just need to apply these paints to the original floor tiles, and then lay new floor tiles on them, and we can directly replace them with new floor tiles. This method can save a lot of time and energy for everyone and is very convenient. No matter what floor tiles are used in the original house, they can be renovated. If the tiles are damaged, they need to be removed.

How to renovate second-hand house tiles II: Keep old tiles.

Some second-hand house tiles are in good condition and basically don't need to be replaced, but they still need to be renovated later. The gaps between tiles need to be completely eradicated and redone, because there will be a lot of dirt in the old tiles after long-term use, so this needs to be removed. At the same time, if the gaps between tiles are redone, it will become more beautiful.

How to renovate second-hand house tiles 3: spread wooden floors on old tiles.

Usually few people will use this method, but it is also possible in theory. If users need to use this method, they need to clean the surface of the floor tile before construction and disinfect it at the same time. Otherwise, the new wooden floor will easily become a breeding ground for all kinds of bacteria when installed, which will have a certain impact on the health of users' living environment. In addition, if the wooden floor is laid on the tiles, it will increase the height of the ground, which is also something we need to consider.

How to clean the living room tiles?

1, we can use detergent every day. Soap and other items are cleaned with low tiles.

2, you can use soap and a small amount of ammonia and turpentine to form a mixture to clean the tiles, which will make the tiles look brighter.

3. If there are scratches on the surface of the ceramic tile, you can now apply toothpaste to the scratches and wipe them with a dry rag.

How to redecorate an old house

Step 1: Check out the old house.

What we are talking about here is actually to detect the problems existing in old houses, especially some walls that often leak, especially the entrances to kitchens and bathrooms. Because of waterproof aging, the wall will leak and return to alkali. Find these problems and mark them well, so as to pay special attention in the later construction, so as to better supervise the construction quality of decoration personnel.

Step 2: Design and layout of the old house

If the renovation of old houses is to be effective and the layout planning is reasonable, then it is best to invite professional designers and never think about where to decorate. Without the overall design and layout, the old house renovated in the later period may not want to live by itself, but it is necessary to find professionals to be the people of the old house decoration company, so that the design and construction can be done together to ensure the landing.

Step 3: Start the demolition.

According to the final design scheme, all unnecessary decoration of the old house will be demolished. But what needs special attention here is that only non-bearing walls can be demolished. It's best to check with the property before smashing the wall, because some old houses take a long time and may not have a floor plan, so it's best to check with the property whether they can be demolished.

Step 4: Hydropower transformation of old houses

The hydropower transformation of the old house is a concealed project, which cannot be modified after bricklaying. Moreover, if the renovation period of the old house exceeds 10 years for the first time, it is best to replace all the water pipes. Moreover, the water and electricity accessories should be selected from big brands, and the quality can be guaranteed. The skill of a hydropower master is also very important. If you are not used to it, you should pay attention to the horizontal and vertical, which is also a key process in the renovation of old houses.

Step 5: Wall renovation.

When I first inspected the house, I mentioned the renovation of the old house wall. If the basic level of the wall is acceptable, then it is necessary to eradicate the wall in the problematic place marked at the beginning, scrape putty again, level and polish the wall, and then paint it as a whole.

Step 6: Waterproof construction, tile laying.

This is also a crucial step in the renovation of old houses, and the waterproofing of kitchen and bathroom is also the top priority in the renovation of our old houses, because many old houses are facing the same problem of kitchen and bathroom leakage. If you want to live in a house for more than ten or twenty years, waterproof construction must not be ignored, and the practice of kitchen and bathroom must be done in accordance with the specified requirements and construction times. After the closed water test, make sure that there is no water seepage to the downstairs, and then lay the tiles.

Step 7: hit the cabinet with a wooden ceiling.

Ceiling is not required, but cabinets are essential furniture for every household. If it is a cabinet customized for the whole house, you can install it on site after pasting the tiles. If it is made by carpenters on site, the plates must be of qualified quality and high environmental protection level, so as to ensure that the indoor formaldehyde will not exceed the standard after the renovation of the old house is completed.