What procedures should I go to the property for the renovation of second-hand houses?

1, the first thing we need to do is to sign the decoration agreement issued by the property.

2, and then provide their own decoration drawings, mainly water circuit transformation and non-bearing wall demolition projects.

3. The next step is to apply for a "work permit", that is, stick the project deadline on your door to facilitate property inspection.

4. It is also necessary to apply for a community pass, mainly for workers, to prevent illegal people from mixing into the community during renovation.

5. Pay the decoration deposit, and each community charges differently. Generally, it will be returned to the owner within 3 months after the renovation is completed.

6. Pay the garbage clearing fee: This fee is used to pay for the cleaning and decoration of the property, which is different from the fee paid to the decoration company. Different property companies may charge different fees.

Second-hand house decoration order 1, main demolition. When the old house is rebuilt, the original walls, doors and windows, floors, water pipes and wires need to be removed. Remind everyone that the waterproof layer of the kitchen and bathroom wall has been destroyed when it was demolished. It is suggested that waterproof treatment should be done after dust removal on the wall. There will be a lot of rubbish in the process of demolition, which needs to be cleaned up and the room kept clean and tidy, so that the construction is convenient and there are not so many messy items. At this time, you can determine the main materials to be purchased, purchase them in advance, and install them directly.

2. Structural optimization. If you are not satisfied with the structure of the old house, you can rebuild it, but remember that the load-bearing wall cannot be demolished. For example, transform the kitchen into an open kitchen, and the squatting pan can be replaced with a toilet. It is also necessary to remind everyone that the maintenance port should be reserved when the bathroom and kitchen are wrapped up to facilitate future maintenance.

3, take cover engineering. The renovation of old houses needs to be done with concealed works, such as air-tightness test of air-conditioning and ventilation equipment, resistance detection of pipes and lines designed in the ceiling, whether the lines are firmly connected, whether the joints meet the requirements, and whether the flammable materials are properly protected against fire, so as to avoid potential safety hazards caused by future use.

4. Channel optimization. You can check whether the water pipes in the old house are rusty or aging first. If you have these problems, you must replace them to avoid water leakage in the future and bring yourself unnecessary trouble. The ppr pipeline with good quality should be selected, and the closed water test should be done after replacement. If there is leakage, replace the pipeline in time.

5. Circuit optimization. Aluminum wire is generally used in old houses, but now aluminum wire has been eliminated, which is easy to age, poor conductivity and easy to catch fire. There are still some problems in the old house, such as irregular wiring and insufficient capacity, so special attention should be paid to the transformation. Home decoration is generally 2.5mm copper wire, and buried wires need PVC insulated tubes. Lighting, sockets and air conditioners should be wired separately to meet the use requirements.

6. Optimization of doors and windows. Finally, optimize the doors and windows. If the style is solid and you like it, you can redraw it. If the doors and windows are deformed, they must be replaced with new ones to avoid problems and unnecessary troubles in later use.