Responsibility book for production safety

Model essay on responsibility for production safety (5 general remarks)

In our daily life, there are more and more occasions where we need to use responsibility letters, which can make us fully aware of the importance of responsibility. Do you know the format of the responsibility book? The following is a model essay (generally 5 articles) on the responsibility of production safety, which I carefully arranged, for reference only. Let's have a look.

Responsibility Letter for Work Safety 1 To conscientiously implement the Law on Work Safety and the policy of "safety first, prevention first and comprehensive treatment", comprehensively strengthen production management, further implement the responsibility system for work safety, establish and improve the standardized management system for work safety, strengthen major risk monitoring measures, establish and improve the emergency support system for first aid and disaster reduction, and ensure the full realization of the company's production and business objectives. In accordance with the principles of "whoever is in charge is responsible" and "graded management and graded responsibility", Hainan (Tanniu) Wenchang Chicken Co., Ltd. (hereinafter referred to as the joint-stock company) and the person in charge of its farms (factories) signed the Responsibility Letter for Safety in Production, the details of which are as follows:

First, the accident control index

1, put an end to serious injury or casualty accidents;

2, put an end to major fire, burning and explosion accidents;

3, the canteen to do a good job of preservation, cleaning, anti-virus, disinfection, strengthen food entrance management, put an end to food poisoning and other food safety accidents;

4. Reduce the frequency of general accidents. The frequency of general personal injuries and minor injuries shall not exceed 3 person-times, and no traffic accidents will occur in the production management area of this unit.

5, no major environmental pollution and toxic and harmful gas leakage accidents, and strive to reduce pollutant emissions.

Second, the work requirements of production safety

1, abide by the provisions of laws and regulations on safety in production, ensure safety in production, and assume the responsibility for safety in production according to law. Organize the formulation and implementation of the rescue plan for production safety accidents of the unit, and report production safety accidents in a timely and truthful manner.

2. We should consciously learn from relevant management personnel, improve the ability of safety production management and meet the requirements of relevant laws and regulations.

3, the production safety performance as the unit and management personnel work and important assessment content, the implementation of safety assessment and rewards and punishments.

4. Put safety in production on the important agenda, review the safety production plan, and be responsible for the specific implementation of the safety production plan.

5, timely understand and grasp the work safety in production of this unit, timely supervise and urge the implementation of major problems and hidden dangers of accidents, to ensure safety in production.

6. Do a good job in the inspection and maintenance of production equipment, safety equipment, fire-fighting facilities, protective equipment and first-aid appliances, and contact the equipment maintenance personnel in time to maintain them in good condition and normal operation when problems are found; Supervise and educate employees to use labor protection articles and appliances reasonably, use fire-fighting equipment correctly and update their work.

7. Regularly report the safety production management, inspection and supervision, accident hidden dangers rectification and so on to the office of the leading group for safety production of the joint-stock company. , and make a special report on major security issues and put forward specific solutions.

8. Organize employees to carry out safety education and training to ensure that employees have the necessary knowledge of safety production, be familiar with relevant safety rules and regulations and safety operation procedures, and master the safety operation skills of this position. In the future, employees who have not passed safety education and training and have not obtained corresponding qualifications shall not be allowed to work at their posts.

9, special operations personnel must be in accordance with the relevant provisions of the state through special safety training, special operations qualification certificate, can work at his post.

10. Review and implement the safety plan of the construction project in time to ensure that the construction project is synchronized with the safety facilities.

1 1. Formulate the emergency plan for major hazard sources of this unit, organize disaster relief drills of the plan, and implement emergency rescue personnel.

12. Popularize the advanced experience of safety production, actively explore the ideas of safety production under the new situation, and make the safety production of our unit more scientific and effective.

Third, the safety accident control

1. Employees of this unit must be organized to seriously study the Law on Safety in Production and relevant regulations on safety in production, strengthen management, and avoid safety accidents.

2 major production safety accidents, the main person in charge of the unit shall immediately organize rescue, and shall not be absent without leave during the accident investigation and handling.

3. Timely report to the relevant departments and the office of the leading group for production safety of the joint-stock company, protect the scene of the accident, and seriously investigate and deal with the accident responsibility according to the principle of "four don't let go" (the cause of the accident has not been ascertained, the person responsible for the accident has not been seriously dealt with, the employees have not been educated, and the preventive measures have not been implemented).

4. Assist relevant departments in accident investigation and handling, support and cooperate with accident rescue, provide convenient conditions and maintain normal production.

Four, safety work report and evaluation

1, the monthly production analysis meeting organized by the joint-stock company, and each field (factory) should take safety work as the report content; Report the quarterly production safety situation of the unit (including the contents in the annex) before 25th of the last month of each quarter; Submit the safety production performance report signed by the leader of the unit before February 25th, 65438. The content is:

(1) Perform leadership duties;

② Operation of safety production and safety management system of the unit;

(three) the handling of hidden dangers or accidents;

④ Existing problems and measures to be taken in the next step.

⑤ Experience introduction and suggestions.

2. The leading office of production safety of the joint-stock company will conduct performance assessment according to the daily safety management status of the unit and the contents of the performance report of production safety, which will be the basis for the assessment of the person in charge of the unit at the end of the year.

3. For the safety accident caused by the dereliction of duty of the person in charge of the unit, the office of the leading group for safety production of the joint-stock company will take administrative punishment and economic punishment according to the Measures for the Administration of Safety Production of the Joint-stock Company. If it meets the conditions of criminal proceedings, it will be handed over to other relevant departments for handling.

Verb (abbreviation of verb) supplementary clause

1. This Responsibility Letter shall come into effect as of the date of signature by both parties, and the execution period shall be from July 9th to February 3rd, 20xx.

2. This responsibility letter is made in duplicate, with each party holding one copy.

The first person responsible for production safety:

20XX July 8th

Responsibility Letter for Safety Work 2 In order to ensure the smooth production of workshops and safety teams, and safeguard the personal safety of employees and the property safety of enterprises, this responsibility letter is formulated in accordance with the factory safety work standardization manual and relevant safety work rules and regulations.

1, enterprise safety production adheres to the policy of "safety first, prevention first, full participation and comprehensive management", and adheres to the principle that production and operation obey safety needs to ensure the realization of safe production and civilized production;

2, the team under the leadership of the workshop director to carry out safety work, each team leader is the first person in charge of security team production, responsible for security team production management and safety education, organize the implementation of security team production responsibility system, implement enterprise safety production management system and procedures, to ensure the smooth development of safety production work;

3. Workshop leaders plan, arrange, check, summarize and evaluate the production tasks and safety work of the team at the same time;

4, the team to carry out safety activities, through the team meeting, publicity column and other activities, make the team members familiar with the safety management system of our factory, master the safety operation procedures, clear the rights and obligations of workers in production safety, improve safety awareness, master the emergency treatment methods of accidents;

5, the team regularly carry out safety inspection, timely find and control the hidden dangers of production safety, and report to the workshop leaders.

6. Put an end to the "three violations" phenomenon that members of this team violate the command rules, operating rules and labor discipline. Special equipment and special types of work need to hold relevant certificates;

7. Grasp the risk factors and occupational hazards of the safety team, and urge the team members to use labor protection articles correctly to prevent occupational hazards at work;

8. Carry out safety mutual check between teams and groups, and make a good connection between production and safety. The team leader shall disclose safety matters to the team members;

9. In case of personal and equipment accidents, immediately report to the person in charge of the workshop and the factory level, and handle the accidents under the leadership of the factory and the workshop according to the principle of "four don't let go";

10, the responsibility letter will take effect after being signed, valid for one year, and will be assessed at the end of each year. The assessment is based on the Rewards and Punishment System for Enterprise Safety Production, the Measures for Staff Performance Assessment of xx Electric Power Equipment Repair Factory and the Workshop Assessment Management System.

1 1. In case of the change of the person in charge, the handover work should be done in time and the employment should be renewed, and the assessment node is the handover time;

12, this responsibility is in duplicate, one for the workshop and one for the team.

Person in charge of workshop: (signature and seal)

Date:

Safety production responsibility 3 I. Safety objectives

1. Carry out the company's policy of "safety first, prevention first, comprehensive management" in the work of safety production, adhere to the principle that production and operation are subordinate to safety needs, and ensure the realization of safe production and civilized production.

2. No fatal accidents, serious injuries, fires and explosions will occur, ensuring that the annual industrial accident rate is lower than that of the previous year.

3. Maintain the company's harmony and stability, and ensure that the company does not have public security responsibility incidents.

Second, the safety responsibility

4. The main person in charge of the company is the first person in charge of the company's safety production and takes full responsibility for the company's safety production work. The main person in charge of the company conscientiously implements the national and municipal guidelines, policies and regulations on safety production and labor protection, puts safety work on the important agenda of company management, presides over important safety production work meetings, issues major decisions on safety work, and examines and approves important rewards and punishments in safety.

5. Establish and improve the safety production guarantee system to ensure the implementation of funds for safety technical measures;

6. To lead and support the supervision and inspection work of safety management personnel or departments;

7. Lead and organize the preparation of the annual and special period safety work implementation plan, be responsible for examining and approving the responsibility system for production safety at all levels, and supervise and inspect the main persons in charge of all units of the company to do a good job in production safety.

8. Improve the company's safety management organization, enrich full-time safety production management personnel, regularly listen to the work report of the safety production management department, and timely study and solve major problems in safety production.

9. Organize the examination and approval of the company's safety production rules and regulations, examine and approve the company's annual safety measures as required, and supervise the effective implementation of its investment.

10. Organize the formulation and implementation of the company's emergency rescue plan, and establish and improve the company's emergency rescue system.

1 1. Organize the company's safety production work meeting regularly, analyze the safety production trends, and solve the problems existing in safety production in time.

12, organize and lead the company's publicity and education work on safety production, and examine and approve the safety production assessment indicators of all levels and departments.

13. Report the company's safety production status to the workers' congress.

Three. This responsibility shall come into effect after being signed by both parties.

The execution time is 20xx 1 to 20xx 1 on February 3rd.

Person in charge: (signature)

Xx，xx，XX，XX

Responsibility Letter for Safety in Production 4 This responsibility letter for safety in production is formulated in order to clarify the responsibility for safety in production, earnestly implement the requirements of the government and the company for safety in production, and ensure the safe production and normal operation of the enterprise.

First, the main person in charge of the administration of each unit is the first person in charge of production safety of the unit, and takes overall leadership responsibility for production safety (including traffic safety) of the unit and its subordinate departments.

Second, the implementation of the party and the government's guidelines and policies on production safety, and in accordance with the requirements of the duties and responsibility system for production safety stipulated by laws and regulations, the implementation of supervision and management, to prevent and reduce production safety accidents, to ensure the safety of people's lives and property, and to protect the legitimate rights and interests of employees.

Third, put the work of safety in production in an important position in the operation and service of the unit, hold regular safety production meetings, study preventive measures, formulate feasible early warning plans, and solve various problems in safety production in time; Form meeting minutes for each meeting, and make account registration.

Four, the unit's work safety in production, according to the requirements of the responsibility system, step by step decomposition, the implementation of the relevant departments and workers, and regularly check and supervise the implementation of the responsibility system for production safety, all kinds of accidents in the bud.

Five, establish and improve the safety production responsibility system and organizational management network, set up and implement the safety production management leading group, equipped with part-time safety production management personnel.

Six, take various forms to strengthen the publicity and education of safety laws, regulations and safety knowledge, and improve the safety awareness of employees.

Seven, strictly implement the safety operation procedures:

(1) Formulate and strictly implement safety production regulations.

(2) It is strictly forbidden to use fire, electricity and gas in violation of regulations, and strictly manage inflammable, explosive and toxic dangerous goods.

(3) Ensure the normal operation of the fire-fighting equipment system, implement the fire-fighting responsibility system, and achieve the organic combination of civil air defense and machine defense.

(4) Strengthen traffic safety education and strictly abide by traffic safety laws and regulations to ensure safe operation.

(5) Strengthen public security, ensure the safety of articles and management property within the unit, and prevent all kinds of public security cases and accidents.

(6) Employees such as boilers, elevators and mechanical processing equipment. Must show certificates, strengthen pre-job training and retraining of on-the-job personnel, and do a good job in daily maintenance and maintenance of equipment.

Eight, care about the interests of employees, solve the practical difficulties of employees, improve the working environment and rest conditions of employees.

Nine, each unit shall report the safety work to the company's safety production leading group every month. According to the content requirements and time requirements, the duty report on work safety should be filled out strictly and carefully every six months, and signed by the administrative director before June 30th and February 30th every year, and then reported to the Head Office.

X. In case of major casualty accidents or major safety accidents during the assessment period, the company will impose economic penalties and administrative sanctions on those responsible for production safety; The company will reward those who conscientiously implement various measures for safety in production and have no major accidents.

Eleven, the responsibility book shall take effect after signing, valid for two years, and shall be assessed at the end of each year.

Twelve, in case of changes in the responsible person, all units should timely adjust and do a good job of handover, and the responsibility book remains valid.

Person in charge:

Date:

Responsibility letter for safety in production 5 In order to create a first-class modern logistics enterprise and fully complete the task of safety in production throughout the year, as employees of Jiulong Logistics Development Co., Ltd., we have the responsibility to ensure the company's production safety and avoid production safety accidents; Have the responsibility to ensure the safety of equipment, so as not to make the country and investors entrusted to our management suffer losses; In order to avoid personal safety hazards in production activities, this responsibility book is specially formulated!

I. Policies and principles:

1. Within the scope of our responsibilities, we must unswervingly implement the policy of "safety first, prevention first";

2. According to the working characteristics of our company, adhere to the three basic principles of "ensuring safety, efficiency and quality" and make them concrete;

Second, the security objectives:

1, no personal injury or serious injury;

2. The data and materials kept will not be lost or stolen;

3, organize a safety inspection once a month, put an end to safety accidents;

4, realize the annual safety production without accidents;

5, thoroughly implement the * * * central and superior departments of the spirit of safety in production;

Third, the safety responsibility:

1, the company personnel are responsible for the safety work within their responsibilities;

2. Company personnel should conscientiously implement the principle of "Party Committee leadership, administrative responsibility, prevention and treatment by groups, grassroots implementation" and earnestly implement various safety measures;

3. Company personnel shall ensure the implementation of the company's safety responsibility system.

Fourth, the system guarantee:

Our employees gradually enrich and improve our company's system according to the relevant national laws, regulations, standards, systems and other actual conditions, and constantly improve the measures to prevent various unsafe phenomena;

Supplementary terms:

1. This responsibility shall come into effect after being signed by both parties, and the execution time shall be from xx to xx.

2. This responsibility book is made in duplicate, one for the person in charge of the company and one for the personnel of the company.

Person in charge of the company (signature):

Xx，xx，XX，XX