Key points of hydropower installation: details determine success or failure

Water and electricity installation is the most important in decoration, so we should pay attention to these details, otherwise there will be endless troubles. It can save a lot of trouble to consider the position of switches and sockets in advance, as well as the reserved problems of water supply and drainage, bath bully and electric light lines. The following are the main points of water and electricity installation, which must be kept in mind.

Plan all equipment locations.

Plan the location and installation of all water-related equipment, such as water heaters, water purifiers, toilets, etc. At the same time, consider whether hot water is needed to avoid repeated transformation caused by temporary replacement of equipment.

Determine the type of water heater

Be sure to use gas or electric water heaters to avoid repeated construction of waterways caused by later replacement.

Reserved bathroom exit

In addition to the conventional water outlet, it is best to reserve a water outlet in the bathroom for later flushing.

The drain pipe of the washing machine should be in the wall.

After determining the position of the washing machine, it is both beautiful and convenient to make the drain pipe in the wall.

Pressure test to ensure no leakage.

After waterway reconstruction, pressure test must be carried out to ensure no leakage. It is best to have on-site supervision of the property during the inspection to prevent being cheated by the decoration team.

Check whether the drain pipe is unobstructed.

Check whether the drainage of the kitchen and bathroom is smooth when closing the house, and let the property clear in time if there is any problem. Protect the drainage pipe during decoration to prevent cement from falling into the blockage.

Drainage Check the drainage of floor drain.

After the kitchen and bathroom floor tiles are laid, check the drainage of the floor drain to ensure unimpeded.

Closed redundant floor drain

When sealing the redundant floor drain, be sure to seal the gap between the drain pipe and the floor drain with glass glue or cement to prevent odor and overflow.

Avoid using deep-water sealed floor drains.

It is best to avoid using deep-water sealed floor drain for washing machine floor drain to avoid overflow caused by poor drainage.