How do self-heating users clean the heating system?

Residents use a self-heating radiator system, so when it comes to cleaning the radiator system, we must decisively clean the radiator system. The cleaning of self-heating radiator system includes three parts: the maintenance of wall-hung boiler host, the maintenance of pipeline and the cleaning of radiator. Let's take a look at it with the golden flagship flag brother.

The cleaning of self-heating radiator system includes three parts.

First, the maintenance of wall-hung boiler host

The actual radiator is not installed once and for all. Just like you use a car, you need to do routine maintenance every few thousand kilometers, you need to add or change oil, and you need to check and maintain the engine, tires and bearings. First of all, radiator heating is transported by heat source (generally, home heating is mainly based on wall-hung boilers). Wall-hung boilers are more sophisticated electrical equipment than water heaters, so regular cleaning and maintenance are very important. Most customers only need emergency maintenance when they encounter problems in use, which is very bad for the wall-hung boiler itself and will also cause trouble in use. It is suggested that boilers that have been used for more than three years can be cleaned and maintained. Let's take a look at the boilers that have been used for five heating seasons. The parts of the boiler were too dirty to be used and returned to normal after cleaning.

Second, the pipeline system maintenance

In addition to regular cleaning and maintenance of wall-hung boiler, the internal waterway of heating system pipeline is a closed circulation system, and the water contains microorganisms. Under certain conditions, it will produce a lot of biological mucus, which will attach to the inner wall of the pipeline, and also contain a lot of bacteria, which will also cause harm to human health. If it is not cleaned for a long time, it will not only reduce the water flow and slow down the flow rate, but also make the indoor temperature effect worse; In severe cases, the pipeline will be blocked, causing the pipeline to be blocked and unable to be dredged, resulting in the pipeline being permanently unusable.

According to statistics, every increase of 1mm dirt on the inner wall of heating pipes will reduce the ambient temperature by 6℃, which will not only affect the normal use temperature, but also cause great energy waste.

After the general heating system is used for 1-2 heating seasons, a large number of biological slime, impurities and bacteria will be produced in the pipeline. In order to ensure the cleanliness of the pipeline and prolong the service life of the system, it is necessary to clean and maintain the pipeline system regularly. Gold Flagship adheres to the principle of honest management. Most customers add imported system protectants (some customers have special requirements) to their heating systems, which can effectively control and delay the breeding of impurities, and extend the cleaning and maintenance cycle from 1-2 years to 3-5 years, which not only better protects the overall heating system, but also greatly saves customers' maintenance costs.

3. When can it be cleaned?

The cleaning and maintenance time of water radiator can be carried out before heating, during heating and after heating. Cleaning before heating can ensure normal use during heating; Cleaning during heating can intuitively feel the contrast; However, cleaning after heating is very important, because bacteria multiply and regenerate rapidly in spring and summer, so from a health point of view, it is recommended to clean and maintain after heating season.

Fourth, how to clean?

Since the cleaning and maintenance of heating system is so important, can users clean themselves at home?

Our suggestion is yes orno. Radiator cleaning is a technical activity, which requires professional equipment, materials and technology to ensure that the whole system is really clean. So find a professional radiator system cleaning company, they will check and clean all the joints for you, and all the joints need to be tightened to prevent leakage. In order to ensure the normal use of your system and not pollute your home environment, please leave professional matters to professional personnel, and do not operate them privately.