How to solve the yellow light trip of electric meter display

It is necessary to check whether there is a problem with the electric meter at the first time and whether the amount in the electric meter is not enough.

The trip indicator light of smart meter is yellow, which usually lights only when the load switch is turned off, but not at ordinary times. If the travel indicator is always on, there are several reasons:

1. Check whether the remaining power of the smart meter is zero or reaches the set lower limit. If the remaining power of the smart meter is zero or has reached the set lower limit, the user's power supply may be cut off and the trip indicator light will always be on.

Solution: In this case, please buy electricity in time. When the purchased electricity fee is allocated to smart meters, just try to turn on the switch, or some meters can send electricity by themselves;

2. If the remaining amount of the electric meter is greater than zero, the tripping indicator light is still on, and the switch is still closed after tripping. Please don't handle it without authorization.

Solution: First, contact the property electrician to check the indoor short circuit fault point, or call the electric power service hotline 95598, and the service personnel of the power supply company will assist in handling related faults;

3. Debugging and upgrading the service billing background of the power supply company may also lead to the situation that the trip indicator light is always on, but it does not often appear.

Solution: In this case, just call the electric power service hotline 95598 for maintenance and wait for treatment.

The abbreviation of watt-hour meter is an instrument for measuring electric energy, also known as watt-hour meter, fire meter, watt-hour meter and watt-hour meter, which refers to instruments for measuring various electric quantities.

Watt-hour meter is an instrument for measuring electric energy, also known as watt-hour meter, pyrometer and watt-hour meter. It refers to an instrument for measuring various electrical quantities, commonly known as watt-hour meter and pyrometer.

By use: industrial and civil electric meters, electronic standard meters, maximum demand meters, complex rate meters.

According to the structure and working principle: inductive (mechanical), electrostatic (electronic), mechatronics (hybrid)

According to the nature of power supply: AC meter and DC meter.

According to accuracy grade: common tables: 0.2S, 0.5S, 0.2, 0.5, 1.0, 2.0, etc.

Standard table: 0.0 1, 0.05, 0.2, 0.5, etc.

According to the installation and wiring mode: direct access and indirect access.

Electrical equipment: single-phase, three-phase three-wire and three-phase four-wire watt-hour meters.