What are the energy-saving and emission-reduction measures for residential properties?

(1) Grasp the effective running time and parameters of various energy-using equipment. Property management personnel should study when all energy-using equipment must be used and when it can be used or shut down with reduced load. The running time and parameters of energy-using equipment should be adjusted in time according to the changes of seasons or other conditions. For example, the switching time of outdoor road lighting should be adjusted in time with the change of seasons, the temperature of hot water can be reduced in summer, and elevators can be opened less during the period of less people flow. (2) Reasonable collocation of energy-using equipment and different areas of the configuration area have different requirements for environmental conditions, and the requirements for the equipment to be configured should also be changed accordingly. The ideal configuration is that when the equipment load changes, it always runs in the high efficiency area, which requires that the energy capacity generated by the equipment operation should be reasonably matched. Some ventilation equipment in some buildings has been running in inefficient areas for a long time, so it is necessary to match the load as reasonably as possible, and appropriately increase the load of low-load refrigerators for load adjustment to avoid running in inefficient areas. In the heating system, for buildings and rooms with long sunshine time, hidden location and high humidity, multi-pipe heating should be adopted to make the heat dissipation area larger, but it can be used in high-temperature building areas.

Appropriately reduce the number of pipes for heating equipment. The number of exhaust fans should be reasonably increased or decreased according to the ventilation situation of the geographical location, depending on the supporting facilities of the site. It is also necessary to reduce unnecessary lighting intensity. The indoor illumination of many buildings is too high, which may lead to the waste of illumination in modern office and commercial environment. (3) Energy recovery and utilization Appropriate energy-saving devices In terms of ventilation, the temperature difference between fresh air and exhaust air is large in high temperature and cold season, so energy recovery devices can be used to directly recover energy from exhaust air to reduce the load of fresh air. In terms of heating, the hot air of boiler water can also continuously heat new water through strict equipment and reasonable channels. In the water supply network, the equipment with the highest efficiency and lowest cost should be selected according to the capacity and speed of water supply and demand in the local area, and the supporting equipment in the network should adopt a systematic, perfect and energy-saving configuration scheme on the premise of meeting the requirements of architectural design and property management. Use reclaimed water circulation system for irrigation, use rainwater and snow water as much as possible, and use little or no tap water. Encourage the use of fuel-efficient and environmentally friendly air-cooled gasoline engines. In terms of lighting, according to the different areas and places of property management, what kind of lamps to use should also be considered. Iodine tungsten lamp can be used for outdoor street lamps, energy-saving lamps can be used for lobby lighting, and fluorescent lamps and energy-saving lamps can be used for long-term lighting in basements. (4) The use of induction equipment More use of induction equipment can not only reduce manual operation and save manpower, but also improve intelligent management. It is important to prevent energy waste and save resources and costs. Outdoor public road lighting mostly adopts time-controlled and light-controlled methods. Induction lamp can be used in the windows of corridors, public toilets and exhibition halls. At present, many faucet outlets in public places also use sensing devices, and this method is also worth popularizing. Fire fighting equipment should advocate the use of fire, light,

The smoke sensor gives an alarm in time, which not only ensures the safety of business operators, but also saves manpower and material resources. (5) Energy-consuming equipment should be cleaned and cleaned regularly in time. Some property equipment will be left outdoors for a long time, and the surface will be covered with dust. Dust and dirt can easily enter the equipment through large and small holes, resulting in low operating power of the equipment and even hindering its normal work. The long-term operation of property equipment is also easy to contaminate the equipment with oil and chemicals, which also accelerates the service life of the equipment. Therefore, it is necessary to clean energy-using equipment in time and regularly. Such as air-conditioning ventilation system, air-conditioning water system and other air-conditioning equipment, such as surface coolers and filters, need to be cleaned by property personnel. Heating pipe network, daily lighting equipment, monitoring system, elevator equipment, etc. It should also be cleaned and kept clean in time. (six) found that the property equipment damage, should be timely repair or adjustment. Users of daily tools in property work should be cautious and cherish. If damage is found, it should be repaired in time. On the premise of not affecting work efficiency, we can find existing resources to make them return to normal, and we can also modify and adjust them. If the mowing force of the mower is not enough, the height of the hob of the mower can be reduced or the height of the fixed blade of the mower can be increased to make the interval between the hob and the fixed blade reach the most suitable distance for mowing.

Hope to adopt, thank you.